Exploratory study on the effects of novel diamine curing agents and isocyanate precursors on the properties of new epoxy and urethane adhesives

The effects of novel aromatic diamine structures on the adhesive properties of epoxy and polyurethane adhesives were studied. Aromatic diamines based on benzophenone and diphenyl-methane isomers were evaluated as curing agents for epoxy resins and benzophenone and diphenyl-methane based diamine isomers were evaluated as curing agents for polyurethane adhesives. Polyurethane adhesives were prepared based on m, m prime-diisocyanato-diphenyl-methane and m, m prime-diisocyanato-benzophenone. The m, m prime-diisocayanato-diphenyl-methane based adhesive had properties comparable to state-of-the-art adhesives. The m, m prime-diisocyanato-benzophenone based adhesive was extremely reactive

Polyimide Matrix composites: Polyimidesulfone/LARC-TPI (1:1) blend

Polyimide matrix composites were fabricated from unidirectional unsized AS-4 carbon fiber and a doped 1:1 blend of two polyimides: benzophenone dianhydride-3,3'-diamino diphenylsulfone (PISO2) and benzophenone dianhydride-3,3'-diamino benzophenone (LARC-TPI). To enhance melt flow properties, the molecular weight of the PISO2 was controlled by end-capping with phthalic anhydride and addition of 5 percent by weight p-phenylene diamine-phthalic anhydride bisamic acid dopant. Prepreg was drum-wound using a diglyme slurry comprised of the soluble polyamideacid of PISO2, the soluble bisamideacid of the dopant, and the insoluble imidized LARC-TPI powder. Melt flow studies with a rotary rheometer and parallel plate plastometer on neat resin and prepreg helped develop an optimum cure cycle. Composite mechanical properties at room and elevated temperatures, dry and moisture-saturated, were evaluated, including short beam shear strength and flexure, tensile, shear, and compression properties. Two 18 in. x 24 in. skin-stringer panels were fabricated, one of which was tested in compression to failure

Development of a polyimide for use as a temperature and solvent resistant sealant

Polyimide developed by the interaction of benzophenone tetracarboxylic dianhydride, polyoxypropylene diamine, and oxydianiline is used for fuel tanks that are exposed to extreme temperatures

Synthesis of novel β-aminocyclobutanecarboxylic acid derivatives by a solvent-free aza-Michael addition and subsequent ring closure

Novel beta-aminocyclobutanecarboxylic acid derivatives were prepared via a sequential solvent-free aza-Michael addition of benzophenone imine across 3-halopropylidenemalonates and base-induced ring closure. These highly substituted cyclobutanedicarboxylic acid derivatives were subjected to a reactivity study which demonstrated the tendency of these donor-acceptor substituted four-membered rings to be converted into their corresponding ring-opened products

Multiplexed in-gel microfluidic immunoassays: characterizing protein target loss during reprobing of benzophenone-modified hydrogels.

From whole tissues to single-cell lysate, heterogeneous immunoassays are widely utilized for analysis of protein targets in complex biospecimens. Recently, benzophenone-functionalized hydrogel scaffolds have been used to immobilize target protein for immunoassay detection with fluorescent antibody probes. In benzophenone-functionalized hydrogels, multiplex target detection occurs via serial rounds of chemical stripping (incubation with sodium-dodecyl-sulfate (SDS) and β-mercaptoethanol at 50-60 °C for ≥1 h), followed by reprobing (interrogation with additional antibody probes). Although benzophenone facilitates covalent immobilization of proteins to the hydrogel, we observe 50% immunoassay signal loss of immobilized protein targets during stripping rounds. Here, we identify and characterize signal loss mechanisms during stripping and reprobing. We posit that loss of immobilized target is responsible for ≥50% of immunoassay signal loss, and that target loss is attributable to disruption of protein immobilization by denaturing detergents (SDS) and incubation at elevated temperatures. Furthermore, our study suggests that protein losses under non-denaturing conditions are more sensitive to protein structure (i.e., hydrodynamic radius), than to molecular mass (size). We formulate design guidance for multiplexed in-gel immunoassays, including that low-abundance proteins be immunoprobed first, even when targets are covalently immobilized to the gel. We also recommend careful scrutiny of the order of proteins targets detected via multiple immunoprobing cycles, based on the protein immobilization buffer composition

Estrogenic activity of phenolic additives determined by an in vitro yeast bioassay

Copyright @ 2001 Environmental Health PerspectivesWe used a recombinant yeast estrogen assay to assess the activity of 73 phenolic additives that are used as sunscreens, preservatives, disinfectants, antioxidants, flavorings, or for perfumery. Thirty-two of these compounds displayed activity: 22 with potencies relative to 17 beta -estradiol, ranging from 1/3,000 to -estradiol. Forty-one compounds were inactive. The major criteria for activity appear to be the presence of an unhindered phenolic OH group in a para position and a molecular weight of 140-250 Da.This work was supported in part under contract with the U.K. Department of Trade and Industry as part of the Government Chemist Programme

Toxicological Study Employing Repeated Doses of Garcinielliptone FC, a Polyisoprenylated-Benzophenone Isolated from Seed of Platonia Insignis Mart

The major constituent from the hexane extract of the seeds of P. insignis is GFC (garcinielliptone FC). Doses of 25, 50and 75 mg/kg of GFC were aseptically suspended in 0.05% Tween 80 dissolved in 0.9% saline (vehicle) and orally administered for30, 90 and 120 consecutive days to adult Swiss mice. In this work, the repeated oral administration, in animals of both sexes,demonstrates that this compound is not able to induce mortality and/or behavioral changes in adult mice. In addition, body weightgain, feed intake and disposal of excreta were not altered by the administration of this compound with repeated doses. Furthermore,no differences in weight and macroscopic structure of the brain, liver, kidney, lung, heart and spleen between groups of male andfemale adult mice were observed after treatment. During the periods of treatment, GFC produced no significant changes onhaematological and biochemical parameters in male and female mice treated with all doses used. The aim of this study was toinvestigate the toxicological potential of GFC through behavioral, hematological, biochemical and morphological parameters inanimals in order to ensure the safe use of Platonia insignis in folk medicine.Fil: Silva, Ana P.. Federal University of Piauí; BrasilFil: Filho, José Carlos C. L. S.. North Union of Parana; BrasilFil: da Costa Júnior, Joaquim S.. Federal Institute of Piauí; BrasilFil: Peláez, Walter José. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Faillace, Martín Sebastián. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Falcão Ferraz, Alexandre de B.. Lutheran University of Brazil; BrasilFil: David, Jorge M.. Institute Of Chemistry, Federal University Of Bahia; Brasil. Universidade Federal da Bahia; BrasilFil: Freitas, Rivelilson M.. Federal University of Bahia; Brasi

Fire-resistant phosphorus containing polyimides and copolyimides

Phosphorus-containing polyimides and copolyimides are synthesized in a two-step polycondensation reaction from 1- (diorganooxyphosphonl)methly 2,4- and 2,6-diaminobenzenes and tetracarboxylic anhydride. The diorgano position of the diorganooxyphosphonyl group includes alkyl, such as ethyl, substituted alkyl, such as 2-chloroethyl, and aryl such as phenyl. The tetracarboxylic anhydries include compounds such as pyrometallitic dianhydride and benzophenone tetracarboxylic dianhydride. The glass transition temperature (Tg) of the polyimides is reduced by incorporation of the (dialkoxyphosphonyl)methyl groups. The phosphorus-containing copolyimides show a considerably higher degree of fire-resistance as compared to that of the corresponding common polyimides

Quantitative ultraviolet measurements on wetted thin-layer chromatography plates using a charge-coupled device camera

This paper presents the first study of the UV imaging of spots on thin-layer chromatographic plates whilst still wet with solvent. Imaging of spots of benzophenone during and after development was carried out using a charge-coupled device camera. Limits of detection were found to be 5 ng on a wetted plate and 3 ng for a dry plate and the relationship between peak area and sample loading was found to be linear in the low nanograrn range over an order of magnitude for both wet and dry modes with r(2) values > 0.99. It was found that UV measurements on wet glass-backed plates suffer from low sensitivity; however, the use of aluminium-backed plates gave increased sensitivity. The apparent absorption coefficient (epsilon(app)) of 10AU m(2) g(-1) at 254 nm is consistent with reflection of the light from the aluminium surface with a double pass through the sorbent layer, and suggests that use of aluminium-backed plates should enable monitoring of separations by UV absorbance during TLC development. (c) 2008 Elsevier B.V. All rights reserved

Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies

A review of the literature on the flammability and decomposition of poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (PEEK) is presented. This paper provides an overview of the flammability of PEEK and its decomposition mechanisms. Based on this literature, mechanisms have been suggested which attempt to explain the products formed at each stage of PEEK decomposition and indicate the intermediates which should be formed at each of these stages