133 research outputs found
Supplementation with orange and blackcurrant juice, but not vitamin E, improves inflammatory markers in patients with peripheral arterial disease
Contribution of Red Blood Cells and Platelets to Blood Clot Computed Tomography Imaging and Compressive Mechanical Characteristics
Thrombus computed tomography (CT) imaging characteristics may correspond with thrombus mechanical properties and thus predict thrombectomy success. The impact of red blood cell (RBC) content on these properties (imaging and mechanics) has been widely studied. However, the additional effect of platelets has not been considered. The objective of the current study was to examine the individual and combined effects of blood clot RBC and platelet content on resultant CT imaging and mechanical characteristics. Human blood clot analogues were prepared from a combination of preselected RBC volumes and platelet concentrations to decouple their contributions. The resulting clot RBC content (%) and platelet content (%) were determined using Martius Scarlet Blue and CD42b staining, respectively. Non-contrast and contrast-enhanced CT (NCCT and CECT) scans were performed to measure the clot densities. CECT density increase was taken as a proxy for clinical perviousness. Unconfined compressive mechanics were analysed by performing 10 cycles of 80% strain. RBC content is the major determinant of clot NCCT density. However, additional consideration of the platelet content improves the association. CECT density increase is influenced by clot platelet and not RBC content. Platelet content is the dominant component driving clot stiffness, especially at high strains. Both RBC and platelet content contribute to the clot's viscoelastic and plastic compressive properties. The current in vitro results suggest that CT density is reflective of RBC content and subsequent clot viscoelasticity and plasticity, and that perviousness reflects the clot's platelet content and subsequent stiffness. However, these indications should be confirmed in a clinical stroke cohort
Contribution of Red Blood Cells and Platelets to Blood Clot Computed Tomography Imaging and Compressive Mechanical Characteristics
Thrombus computed tomography (CT) imaging characteristics may correspond with thrombus mechanical properties and thus predict thrombectomy success. The impact of red blood cell (RBC) content on these properties (imaging and mechanics) has been widely studied. However, the additional effect of platelets has not been considered. The objective of the current study was to examine the individual and combined effects of blood clot RBC and platelet content on resultant CT imaging and mechanical characteristics. Human blood clot analogues were prepared from a combination of preselected RBC volumes and platelet concentrations to decouple their contributions. The resulting clot RBC content (%) and platelet content (%) were determined using Martius Scarlet Blue and CD42b staining, respectively. Non-contrast and contrast-enhanced CT (NCCT and CECT) scans were performed to measure the clot densities. CECT density increase was taken as a proxy for clinical perviousness. Unconfined compressive mechanics were analysed by performing 10 cycles of 80% strain. RBC content is the major determinant of clot NCCT density. However, additional consideration of the platelet content improves the association. CECT density increase is influenced by clot platelet and not RBC content. Platelet content is the dominant component driving clot stiffness, especially at high strains. Both RBC and platelet content contribute to the clot's viscoelastic and plastic compressive properties. The current in vitro results suggest that CT density is reflective of RBC content and subsequent clot viscoelasticity and plasticity, and that perviousness reflects the clot's platelet content and subsequent stiffness. However, these indications should be confirmed in a clinical stroke cohort
ADAMTS-13 and bleeding phenotype in von Willebrand disease
Background: The bleeding phenotype of von Willebrand disease (VWD) varies highly between patients and can only partly be explained by von Willebrand factor (VWF) parameters. By cleaving large VWF multimers into smaller, less active multimers, ADAMTS-13 is an important regulator of VWF activity. However, it is unknown what the role of ADAMTS-13 is in individuals with VWD. Objectives: We therefore studied how ADAMTS-13 activity is associated with the laboratory and bleeding phenotype in individuals with VWD. Methods: We measured ADAMTS-13 activity using the fluorescence resonance energy transfer substrate VWF 73 assay in 638 individuals with VWD in the nationwide cross-sectional Willebrand in the Netherlands study and in 36 healthy controls. The bleeding phenotype was assessed using the Tosetto bleeding score. Results: ADAMTS-13 activity was similar in individuals with VWD (109% +/- 20.6%) and controls (110% +/- 19.7%). ADAMTS-13 activity was higher in individuals with VWD with type 3 than those with type 1 (mean difference, 11.8%; 95% confidence interval [CI], 2.9%-20.8%) or type 2 (mean difference, 16.1%; 95% CI, 7.1%-25.1%). ADAMTS-13 activity was not associated with the Tosetto bleeding score (0.1 Tosetto bleeding score increase per 10% ADAMTS-13 increase, 95% CI, -0.2 to 0.3). Furthermore, ADAMTS-13 activity did not differ between individuals with and without a bleeding event during the year preceding blood sampling (mean difference, 1.4%; 95% CI, -2.1% to 4.9%). Conclusion: ADAMTS-13 activity was highest in individuals with type 3 VWD, but it had only minor associations with VWF parameters. ADAMTS-13 activity does not influence the bleeding phenotype in individuals with VWD
Von Willebrand Factor Multimer Densitometric Analysis:Validation of the Clinical Accuracy and Clinical Implications in Von Willebrand Disease
Von Willebrand factor (VWF) multimer analysis is important in the classification of von Willebrand disease (VWD). Current visual VWF multimer analysis is time consuming and inaccurate in detecting subtle changes in multimer patterns. Although VWF multimer densitometric analysis may be useful, the accuracy needs further investigation before it can be widely applied. In this study we aimed to validate VWF multimer densitometric analysis in a large cohort of VWD patients and to identify patient characteristics associated with densitometric outcomes. Patients were included from the Willebrand in the Netherlands (WiN) study, in which a bleeding score (BS) was obtained, and blood was drawn. For multimer analysis, citrated blood was separated on an agarose gel and visualized by Western blotting. IMAGEJ was used to generate densitometric images and medium-large VWF multimer index was calculated. We included 560 VWD patients: 328 type 1, 211 type 2, and 21 type 3 patients. Medium-large VWF multimer index performed excellent in distinguishing visually classified normal VWF multimers from reduced high-molecular-weight (HMW) multimers (area under the curve [AUC]: 0.96 [0.94-0.98], P < 0.001), normal multimers from absence of HMW multimers (AUC 1.00 [1.00-1.00], P < 0.001), and type 2A and 2B from type 2M and 2N (AUC: 0.96 [0.94-0.99], P < 0.001). Additionally, higher medium-large VWF multimer index was associated with lower BS in type 1 VWD: beta = -7.6 (-13.0 to -2.1), P = 0.007, adjusted for confounders. Densitometric analysis of VWF multimers had an excellent accuracy compared with visual multimer analysis and may contribute to a better understanding of the clinical features such as the bleeding phenotype of VWD patients
Levels of Fibrinogen Variants Are Altered in Severe COVID-19
Background  Fibrinogen variants as a result of alternative messenger RNA splicing or protein degradation can affect fibrin(ogen) functions. The levels of these variants might be altered during coronavirus disease 2019 (COVID-19), potentially affecting disease severity or the thrombosis risk. Aim  To investigate the levels of fibrinogen variants in plasma of patients with COVID-19. Methods  In this case-control study, we measured levels of functional fibrinogen using the Clauss assay. Enzyme-linked immunosorbent assays were used to measure antigen levels of total, intact (nondegraded Aα chain), extended Aα chain (α E ), and γ' fibrinogen in healthy controls, patients with pneumococcal infection in the intensive care unit (ICU), ward patients with COVID-19, and ICU patients with COVID-19 (with and without thrombosis, two time points). Results  Healthy controls and ward patients with COVID-19 ( n  = 10) showed similar fibrinogen (variant) levels. ICU patients with COVID-19 who later did ( n  = 19) or did not develop thrombosis ( n  = 18) and ICU patients with pneumococcal infection ( n  = 6) had higher absolute levels of functional, total, intact, and α E fibrinogen than healthy controls ( n  = 7). The relative α E fibrinogen levels were higher in ICU patients with COVID-19 than in healthy controls, while relative γ' fibrinogen levels were lower. After diagnosis of thrombosis, only the functional fibrinogen levels were higher in ICU patients with COVID-19 and thrombosis than in those without, while no differences were observed in the other fibrinogen variants. Conclusion  Our results show that severe COVID-19 is associated with increased levels of α E fibrinogen and decreased relative levels of γ' fibrinogen, which may be a cause or consequence of severe disease, but this is not associated with the development of thrombosis.</p
Levels of Fibrinogen Variants Are Altered in Severe COVID-19
Background  Fibrinogen variants as a result of alternative messenger RNA splicing or protein degradation can affect fibrin(ogen) functions. The levels of these variants might be altered during coronavirus disease 2019 (COVID-19), potentially affecting disease severity or the thrombosis risk. Aim  To investigate the levels of fibrinogen variants in plasma of patients with COVID-19. Methods  In this case-control study, we measured levels of functional fibrinogen using the Clauss assay. Enzyme-linked immunosorbent assays were used to measure antigen levels of total, intact (nondegraded Aα chain), extended Aα chain (α E ), and γ' fibrinogen in healthy controls, patients with pneumococcal infection in the intensive care unit (ICU), ward patients with COVID-19, and ICU patients with COVID-19 (with and without thrombosis, two time points). Results  Healthy controls and ward patients with COVID-19 ( n  = 10) showed similar fibrinogen (variant) levels. ICU patients with COVID-19 who later did ( n  = 19) or did not develop thrombosis ( n  = 18) and ICU patients with pneumococcal infection ( n  = 6) had higher absolute levels of functional, total, intact, and α E fibrinogen than healthy controls ( n  = 7). The relative α E fibrinogen levels were higher in ICU patients with COVID-19 than in healthy controls, while relative γ' fibrinogen levels were lower. After diagnosis of thrombosis, only the functional fibrinogen levels were higher in ICU patients with COVID-19 and thrombosis than in those without, while no differences were observed in the other fibrinogen variants. Conclusion  Our results show that severe COVID-19 is associated with increased levels of α E fibrinogen and decreased relative levels of γ' fibrinogen, which may be a cause or consequence of severe disease, but this is not associated with the development of thrombosis.</p
Metabolic background determines the importance of NOS3 polymorphisms in restenosis after percutaneous coronary intervention:A study in patients with and without the metabolic syndrome
Variation in the NOS3 gene has been related to the development of restenosis. The Glu298Asp polymorphism has previously been investigated for its effect on NO levels and the development of restenosis. However, the variability of findings gave rise to the hypothesis that the functional significance of this polymorphism may only become manifest under conditions of endothelial dysfunction. Since patients with the metabolic syndrome are known to have endothelial dysfunction, we aimed to investigate if the significance of NOS3 polymorphisms may depend on the presence of the metabolic syndrome
von Willebrand Factor and Factor VIII Clearance in Perioperative Hemophilia A Patients
Background von Willebrand factor (VWF) is crucial for optimal dosing of factor VIII (FVIII) concentrate in hemophilia A patients as it protects FVIII from premature clearance. To date, it is unknown how VWF behaves and what its impact is on FVIII clearance in the perioperative setting. Aim To investigate VWF kinetics (VWF antigen [VWF:Ag]), VWF glycoprotein Ib binding (VWF:GPIbM), and VWF propeptide (VWFpp) in severe and moderate perioperative hemophilia A patients included in the randomized controlled perioperative OPTI-CLOT trial. Methods Linear mixed effects modeling was applied to analyze VWF kinetics. One-way and two-way analyses of variance were used to investigate perioperative VWFpp/VWF:Ag ratios and associations with surgical bleeding. Results Fifty-nine patients with median age of 48.8 years (interquartile range: 34.8-60.0) were included. VWF:Ag and VWF:GPIbM increased significantly postoperatively. Blood type non-O or medium risk surgery were associated with higher VWF:Ag and VWF:GPIbM levels compared with blood type O and low risk surgery. VWFpp/VWF:Ag was significantly higher immediately after surgery than 32 to 57 hours after surgery (p < 0.001). Lowest VWF:Ag quartile (0.43-0.92 IU/mL) was associated with an increase of FVIII concentrate clearance of 26 mL/h (95% confidence interval: 2-50 mL/h) compared with highest VWF antigen quartile (1.70-3.84 IU/mL). VWF levels were not associated with perioperative bleeding F (4,227) = 0.54, p = 0.710. Conclusion VWF:Ag and VWF:GPIbM levels increase postoperatively, most significantly in patients with blood type non-O or medium risk surgery. Lower VWF antigen levels did not lead to clinically relevant higher FVIII clearance. VWF:Ag or VWF:GPIbM levels were not associated with perioperative hemorrhage
- …