66 research outputs found

    Joint 3D Deployment and Resource Allocation for UAV-assisted Integrated Communication and Localization

    Full text link
    In this paper, we investigate an unmanned aerial vehicle (UAV)-assisted integrated communication and localization network in emergency scenarios where a single UAV is deployed as both an airborne base station (BS) and anchor node to assist ground BSs in communication and localization services. We formulate an optimization problem to maximize the sum communication rate of all users under localization accuracy constraints by jointly optimizing the 3D position of the UAV, and communication bandwidth and power allocation of the UAV and ground BSs. To address the intractable localization accuracy constraints, we introduce a new performance metric and geometrically characterize the UAV feasible deployment region in which the localization accuracy constraints are satisfied. Accordingly, we combine Gibbs sampling (GS) and block coordinate descent (BCD) techniques to tackle the non-convex joint optimization problem. Numerical results show that the proposed method attains almost identical rate performance as the meta-heuristic benchmark method while reducing the CPU time by 89.3%.Comment: The paper has been accepted for publication by IEEE Wireless Communications Letter

    Genome Expression Profile Analysis of the Immature Maize Embryo during Dedifferentiation

    Get PDF
    Maize is one of the most important cereal crops worldwide and one of the primary targets of genetic manipulation, which provides an excellent way to promote its production. However, the obvious difference of the dedifferentiation frequency of immature maize embryo among various genotypes indicates that its genetic transformation is dependence on genotype and immature embryo-derived undifferentiated cells. To identify important genes and metabolic pathways involved in forming of embryo-derived embryonic calli, in this study, DGE (differential gene expression) analysis was performed on stages I, II, and III of maize inbred line 18-599R and corresponding control during the process of immature embryo dedifferentiation. A total of ∼21 million cDNA tags were sequenced, and 4,849,453, 5,076,030, 4,931,339, and 5,130,573 clean tags were obtained in the libraries of the samples and the control, respectively. In comparison with the control, 251, 324 and 313 differentially expressed genes (DEGs) were identified in the three stages with more than five folds, respectively. Interestingly, it is revealed that all the DEGs are related to metabolism, cellular process, and signaling and information storage and processing functions. Particularly, the genes involved in amino acid and carbohydrate transport and metabolism, cell wall/membrane/envelope biogenesis and signal transduction mechanism have been significantly changed during the dedifferentiation. To our best knowledge, this study is the first genome-wide effort to investigate the transcriptional changes in dedifferentiation immature maize embryos and the identified DEGs can serve as a basis for further functional characterization

    A study of CP violation in B-+/- -> DK +/- and B-+/- -> D pi(+/-) decays with D -> (KSK +/-)-K-0 pi(-/+) final states

    Get PDF
    A first study of CP violation in the decay modes B±→[KS0K±π∓]Dh±B^\pm\to [K^0_{\rm S} K^\pm \pi^\mp]_D h^\pm and B±→[KS0K∓π±]Dh±B^\pm\to [K^0_{\rm S} K^\mp \pi^\pm]_D h^\pm, where hh labels a KK or π\pi meson and DD labels a D0D^0 or D‾0\overline{D}^0 meson, is performed. The analysis uses the LHCb data set collected in pppp collisions, corresponding to an integrated luminosity of 3 fb−1^{-1}. The analysis is sensitive to the CP-violating CKM phase γ\gamma through seven observables: one charge asymmetry in each of the four modes and three ratios of the charge-integrated yields. The results are consistent with measurements of γ\gamma using other decay modes

    Measurement of Upsilon production in collisions at root s=2.76 TeV

    Get PDF
    The production of Υ(1S)\Upsilon(1S), Υ(2S)\Upsilon(2S) and Υ(3S)\Upsilon(3S) mesons decaying into the dimuon final state is studied with the LHCb detector using a data sample corresponding to an integrated luminosity of 3.3 pb−1pb^{-1} collected in proton-proton collisions at a centre-of-mass energy of s=2.76\sqrt{s}=2.76 TeV. The differential production cross-sections times dimuon branching fractions are measured as functions of the Υ\Upsilon transverse momentum and rapidity, over the ranges $p_{\rm T} Upsilon(1S) X) x B(Upsilon(1S) -> mu+mu-) = 1.111 +/- 0.043 +/- 0.044 nb, sigma(pp -> Upsilon(2S) X) x B(Upsilon(2S) -> mu+mu-) = 0.264 +/- 0.023 +/- 0.011 nb, sigma(pp -> Upsilon(3S) X) x B(Upsilon(3S) -> mu+mu-) = 0.159 +/- 0.020 +/- 0.007 nb, where the first uncertainty is statistical and the second systematic

    Studies of beauty baryon decays to D0ph− and Λ+ch− final states

    Get PDF

    Measurement of CP asymmetry in B-s(0) -> D-s(-/+) K--/+ decays

    Get PDF
    We report on measurements of the time-dependent CP violating observables in Bs0→Ds∓K±B^0_s\rightarrow D^{\mp}_s K^{\pm} decays using a dataset corresponding to 1.0 fb−1^{-1} of pp collisions recorded with the LHCb detector. We find the CP violating observables Cf=0.53±0.25±0.04C_f=0.53\pm0.25\pm0.04, AfΔΓ=0.37±0.42±0.20A^{\Delta\Gamma}_f=0.37\pm0.42\pm0.20, AfˉΔΓ=0.20±0.41±0.20A^{\Delta\Gamma}_{\bar{f}}=0.20\pm0.41\pm0.20, Sf=−1.09±0.33±0.08S_f=-1.09\pm0.33\pm0.08, Sfˉ=−0.36±0.34±0.08S_{\bar{f}}=-0.36\pm0.34\pm0.08, where the uncertainties are statistical and systematic, respectively. We use these observables to make the first measurement of the CKM angle γ\gamma in Bs0→Ds∓K±B^0_s\rightarrow D^{\mp}_s K^{\pm} decays, finding γ\gamma = (115−43+28_{-43}^{+28})∘^\circ modulo 180∘^\circ at 68% CL, where the error contains both statistical and systematic uncertainties.We report on measurements of the time-dependent CP violating observables in Bs0_{s}^{0}  → Ds∓_{s}^{∓} K±^{±} decays using a dataset corresponding to 1.0 fb−1^{−1} of pp collisions recorded with the LHCb detector. We find the CP violating observables Cf_{f} = 0.53±0.25±0.04, AfΔΓ_{f}^{ΔΓ}  = 0.37 ± 0.42 ± 0.20, Af‾ΔΓ=0.20±0.41±0.20 {A}_{\overline{f}}^{\varDelta \varGamma }=0.20\pm 0.41\pm 0.20 , Sf_{f} = −1.09±0.33±0.08, Sf‾=−0.36±0.34±0.08 {S}_{\overline{f}}=-0.36\pm 0.34\pm 0.08 , where the uncertainties are statistical and systematic, respectively. Using these observables together with a recent measurement of the Bs0_{s}^{0} mixing phase −2βs_{s} leads to the first extraction of the CKM angle γ from Bs0_{s}^{0}  → Ds∓_{s}^{∓} K±^{±} decays, finding γ = (115− 43+ 28_{− 43}^{+ 28} )° modulo 180° at 68% CL, where the error contains both statistical and systematic uncertainties.We report on measurements of the time-dependent CP violating observables in Bs0→Ds∓K±B^0_s\rightarrow D^{\mp}_s K^{\pm} decays using a dataset corresponding to 1.0 fb−1^{-1} of pp collisions recorded with the LHCb detector. We find the CP violating observables Cf=0.53±0.25±0.04C_f=0.53\pm0.25\pm0.04, AfΔΓ=0.37±0.42±0.20A^{\Delta\Gamma}_f=0.37\pm0.42\pm0.20, AfˉΔΓ=0.20±0.41±0.20A^{\Delta\Gamma}_{\bar{f}}=0.20\pm0.41\pm0.20, Sf=−1.09±0.33±0.08S_f=-1.09\pm0.33\pm0.08, Sfˉ=−0.36±0.34±0.08S_{\bar{f}}=-0.36\pm0.34\pm0.08, where the uncertainties are statistical and systematic, respectively. Using these observables together with a recent measurement of the Bs0B^0_s mixing phase −2βs-2\beta_s leads to the first extraction of the CKM angle γ\gamma from Bs0→Ds∓K±B^0_s \rightarrow D^{\mp}_s K^{\pm} decays, finding γ\gamma = (115−43+28_{-43}^{+28})∘^\circ modulo 180∘^\circ at 68% CL, where the error contains both statistical and systematic uncertainties

    Study of forward Z + jet production in pp collisions at √s=7 TeV

    Get PDF
    A measurement of the Z(→μ+μ−)Z(\rightarrow\mu^+\mu^-)+jet production cross-section in pppp collisions at a centre-of-mass energy s=7\sqrt{s} = 7 TeV is presented. The analysis is based on an integrated luminosity of 1.0 fb−11.0\,\text{fb}^{-1} recorded by the LHCb experiment. Results are shown with two jet transverse momentum thresholds, 10 and 20 GeV, for both the overall cross-section within the fiducial volume, and for six differential cross-section measurements. The fiducial volume requires that both the jet and the muons from the Z boson decay are produced in the forward direction (2.0<η<4.52.0<\eta<4.5). The results show good agreement with theoretical predictions at the second-order expansion in the coupling of the strong interaction.A measurement of the Z(→μ+μ−)Z(\rightarrow\mu^+\mu^-)+jet production cross-section in pppp collisions at a centre-of-mass energy s=7\sqrt{s} = 7 TeV is presented. The analysis is based on an integrated luminosity of 1.0 fb−11.0\,\text{fb}^{-1} recorded by the LHCb experiment. Results are shown with two jet transverse momentum thresholds, 10 and 20 GeV, for both the overall cross-section within the fiducial volume, and for six differential cross-section measurements. The fiducial volume requires that both the jet and the muons from the Z boson decay are produced in the forward direction (2.0<η<4.52.0<\eta<4.5). The results show good agreement with theoretical predictions at the second-order expansion in the coupling of the strong interaction

    Parametric optimum design of an irreversible heat-transformer based on the thermo-economic approach

    No full text
    The thermo-economic objective function of a heat transformer may include other objective functions such as the coefficient of performance and specific heat pumping load. It is defined as the heat-pumping load divided by the total cost per unit time and its expression is derived from the general cycle model of an irreversible heat-transformer. The general objective function is used to analyze the thermoeconomic and thermodynamic optimum performance of a heat transformer affected by multi-irreversibilities. The bounds of some important parameters are determined. The problem of how to choose optimally these parameters are discussed. The results obtained here can provide some new theoretical guidance for the optimal design and operation of heat transformers and heat engines.Heat transformer Irreversibility Thermoeconomic objective function Performance bound Optimization

    Feasibility Analysis and Clinical Applicability of a Modified Type V Resection Method for Malignant Bone Tumors of the Proximal Humerus

    No full text
    Objective: The purpose of this study was to explore the feasibility and clinical applicability of a modified type V resection method for malignant bone tumors of the proximal humerus. Methods: The relevant anatomic MRI data from 30 normal adult shoulder joints were measured to analyze the feasibility of the modified type V resection method for malignant bone tumors of the proximal humerus. Sixteen patients with malignant bone tumors of the proximal humerus were treated with modified radical resection between March 2012 and April 2017. Recurrence of tumor was evaluated after surgery, and shoulder function was assessed according to the Enneking skeletal muscle tumor function scoring system. Results: Radiographic results showed that the modified type V resection method was feasible, and within the allowable range of the maximum longitudinal diameter (<29.8 mm) and depth (<4 mm). Surgery was successfully completed in all 16 cases, and pathological examination suggested that the purposes for radical resection had been achieved. All patients were followed up over 3–49 months (mean, 15.6 months). One patient had local recurrence at 12 months after surgery, and we performed upper limb amputation. The remaining 15 patients had good prosthesis survival. At the final follow-up, shoulder joint function had recovered compared with preoperative levels, with a mean Enneking score of 25.8 points (range, 24–27 points). Conclusion: Modified type V resection may be feasible for treating tumors of the proximal humerus, maintaining good early shoulder function

    Potential Suitable Habitat of Two Economically Important Forest Trees (Acer truncatum and Xanthoceras sorbifolium) in East Asia under Current and Future Climate Scenarios

    No full text
    Acer truncatum Bunge and Xanthoceras sorbifolium Bunge are small deciduous trees distributed in East Asia and have high ecological and nutrient value due to their strong environmental adaptability and seed oil abundant in nervonic acid and unsaturated fatty acids. However, their natural distribution remains unclear, which will also be affected by the changing climatic conditions. The main purpose of this study was to map and predict the current and future potential suitable habitats of these two species using MaxEnt based on the presence location of species and environmental variables. The results showed that A. truncatum was more suitable for warm and humid climates and was more durable to climate change compared to X. sorbifolium. Under the current environmental conditions, the suitable habitat of A. truncatum was mainly concentrated in Inner Mongolia Plateau, Loess Plateau, Sichuan Basin, Northeast Plain, North China Plain, Korean Peninsula, as well as Japan, with an area of 115.39 × 104 km2. X. sorbifolium was mainly distributed in Inner Mongolia Plateau and Loess Plateau with an area of 146.15 × 104 km2. Under future climate scenarios, the model predicted that higher concentrations of greenhouse gas emissions could result in greater expansion of the potential distribution of both species. Meanwhile, the study also revealed that the two species migrated to the north by east to varying degrees with the change in suitable habitats. This work could provide scientific basis for resource protection and utilization of the two economic forest trees
    • …
    corecore