Transport of Pb and Zn by carboxylate complexes in basinal ore fluids and related petroleum-field brines at 100°C: the influence of pH and oxygen fugacity

It is well established through field observations, experiments, and chemical models that oxidation (redox) state and pH exert a strong influence on the speciation of dissolved components and the solubility of minerals in hydrothermal fluids. log [Image: see text] –pH diagrams were used to depict the influence of oxygen fugacity and pH on monocarboxylate- and dicarboxylate-transport of Pb and Zn in low-temperature (100°C) hydrothermal ore fluids that are related to diagenetic processes in deep sedimentary basins, and allow a first-order comparison of Pb and Zn transport among proposed model fluids for Mississippi Valley-type (MVT) and red-bed related base metal (RBRBM) deposits in terms of their approximate pH and [Image: see text] conditions. To construct these diagrams, total Pb and Zn concentrations and Pb and Zn speciation were calculated as a function of log [Image: see text] and pH for a composite ore-brine with concentrations of major elements, total sulfur, and total carbonate that approximate the composition of MVT and RBRBM model ore fluids and modern basinal brines. In addition to acetate and malonate complexation, complexes involving the ligands Cl(-), HS(-), H(2)S, and OH(- )were included in the model of calculated total metal concentration and metal speciation. Also, in the model, Zn and Pb are competing with the common-rock forming metals Ca, Mg, Na, Fe, and Al for the same ligands. Calculated total Pb concentration and calculated total Zn concentration are constrained by galena and sphalerite solubility, respectively. Isopleths, in log [Image: see text] –pH space, of the concentration of Pb and concentration of Zn in carboxylate (acetate + malonate) complexes illustrate that the oxidized model fluids of T. H. Giordano (in Organic Acids in Geological Processes, ed. E. D. Pittman and M. D. Lewan, Springer-Verlag, New York, 1994, pp. 319–354) and G. M. Anderson (Econ. Geol., 1975, 70, 937–942) are capable of transporting sufficient amounts of Pb (up to 10 ppm) and Zn (up to 100 ppm) in the form of carboxylate complexes to form economic deposits of these metals. On the other hand, the reduced ore fluid models of D. A. Sverjensky (Econ. Geol., 1984, 79, 23–37) and T. H. Giordano and H. L. Barnes (Econ. Geol., 1981, 76, 2200–2211) can at best transport amounts of Pb and Zn, as carboxylate complexes, that are many orders of magnitude below the 1 to 10 ppm minimum required to form economic deposits. Lead and zinc speciation (mol% of total Pb or Zn) in the model ore fluid was calculated at specific log [Image: see text] –pH conditions along the 100, 0.01, and 0.001 ppm total Pb and total Zn isopleths. Along the 100 ppm isopleth conditions are oxidized (∑SO(4 )>> ∑H(2)S) with Pb and Zn predominantly in the form of chloride complexes under acid to mildly alkaline conditions (pH from 3 to approximately 7.5), while hydroxide complexes dominate Pb and Zn speciation under more alkaline conditions. Sulfide complexes are insignificant under these oxidized conditions. For more reduced conditions along the 0.01 and 0.001 ppm isopleths chloride complexes dominate Pb and Zn speciation in the SO(4)(2- )field and near the SO(4)(2-)-reduced sulfur boundary from pH = 4 to approximately 7.5, while hydroxide complexes dominate Pb and Zn speciation under alkaline conditions above pH = 7.5 in the SO(4)(2- )field. In the most reduced fluids (∑H(2)S >> ∑SO(4)) along the 0.01 and 0.001 isopleths, sulfide complexes account for almost 100% of the Pb and Zn in the model fluid. Acetate (monocarboxylate) complexation is significant only under conditions of chloride and hydroxide complex dominance and its effect is maximized in the pH range 5 to 7, where it complexes 2 to 2.6% of the total Pb and 1 to 1.25% of the total Zn. Malonate (dicarboxylate) complexes are insignificant along all isopleths. The speciation results from this study show that deep formation waters characterized by temperatures near 100°C, high oxidation states and ∑H(2)S < 0.03 mg L(-1 )([Image: see text] < 10(-6)), high chlorinities (~ 100000 mg L(-1)), and high but reasonable concentrations of carboxylate anions can mobilize up to 3% of the total Pb and up to 1.3% of the total Zn as carboxylate complexes. Furthermore, these percentages, under the most favorable conditions, correspond to approximately 1 to 100 ppm of these metals in solution; concentrations that are adequate to form economic deposits of these metals. However, the field evidence suggests that all of these optimum conditions for carboxylate complexation are rarely met at the same time. A comparison of the composite ore fluid compositions from this study and modern brine data shows that the ore brines, corresponding to log [Image: see text] –pH conditions based on the Anderson (1975) and Giordano (1994) model fluids, are similar in many respects to modern, high trace-metal petroleum-field brines. The principal differences between modern high trace-metal brines and the composite ore fluids of Anderson (1975) and Giordano (1994) relate to their carboxylate anion content. The reported concentrations of monocarboxylate anions (∑monocbx) and dicarboxylate anions (Edicbx) in high trace-metal petroleum-field brines (< 1 to 300 mg L(-1 )and < 1 mg L(-1), respectively) are significantly lower than the concentrations assumed in the modelled brines of this study (∑monocbx = 7 700 mg L(-1 )and ∑dicbx = 300 mg L(-1)). There are also major differences in the corresponding total chloride to carboxylate ratio (∑m(Cl)/∑m(cbx)) and monocarboxylate to dicarboxylate ratio (∑m(monocbx)/∑m(dicbx)). Modern high trace-metal brines have much higher ∑m(Cl)/∑m(cbx )values and, therefore, the contribution of carboxylate complexes to the total Pb and Zn content in these modern brines is likely to be significantly less than the 1 to 3 percent for the composite ore fluids of Anderson (1975) and Giordano (1994). The composite ore-brine based on the Giordano and Barnes (1981) MVT ore fluid is comparable to the high salinity (> 170 000 mg L(-1 )TDS) subset of modern brines characterized by low trace-metal content and high total reduced sulfur (∑H(2)S). A comparison of the Sverjensky (1984) composite ore-brine with modern petroleum-field brines in terms of ∑H(2)S and Zn content, reveals that this ore fluid corresponds to a "border-type" brine, between modern high trace-metal brines and those with low trace-metal content and high ∑H(2)S. A brine of this type is characterized by values of ∑H(2)S, ∑Zn, and/or ∑Pb within or near the 1 to 10 mg L(-1 )range. Based on brine-composition data from numerous references cited in this paper, border-type brines do exist but are rare. The model results and field evidence presented in this study are consistent with other chemical simulation studies of carboxylate complexation in modern petroleum-field brines. Thus, it appears that carboxylate complexation plays a minor, if not insignificant, role as a transport mechanism for Pb and Zn in high salinity Na–Cl and Na–Ca–Cl basinal brines and related ore fluids

Shear veins observed within anisotropic fabric at high angles to the maximum compressive stress

Some faults seem to slip at unusually high angles (>45°) relative to the orientation of the greatest principal compressive stress. This implies that these faults are extremely weak compared with the surrounding rock. Laboratory friction experiments and theoretical models suggest that the weakness may result from slip on a pre-existing frictionally weak surface, weakening from chemical reactions, elevated fluid pressure or dissolution–precipitation creep. Here we describe shear veins within the Chrystalls Beach accretionary mélange, New Zealand. The mélange is a highly sheared assemblage of relatively competent rock within a cleaved, anisotropic mudstone matrix. The orientation of the shear veins—compared with the direction of hydrothermal extension veins that formed contemporaneously—indicates that they were active at an angle of 80°±5° to the greatest principal compressive stress. We show that the shear veins developed incrementally along the cleavage planes of the matrix. Thus, we suggest that episodic slip was facilitated by the anisotropic internal fabric, in a fluid-overpressured, heterogeneous shear zone. A similar mechanism may accommodate shear at high angles to the greatest principal compressive stress in a range of tectonic settings. We therefore conclude that incremental slip along a pre-existing planar fabric, coupled to high fluid pressure and dissolution–precipitation creep, may explain active slip on severely misoriented faults

Fault zone fabric and fault weakness

Geological and geophysical evidence suggests that some crustal faults are weak1–6 compared to laboratory measurements of frictional strength7. Explanations for fault weakness include the presence of weak minerals4, high fluid pressures within the fault core8,9 and dynamic processes such as normal stress reduction10, acoustic fluidization11 or extreme weakening at high slip velocity12–14. Dynamic weakening mechanisms can explain some observations; however, creep and aseismic slip are thought to occur on weak faults, and quasi-static weakening mechanisms are required to initiate frictional slip on mis-oriented faults, at high angles to the tectonic stress field. Moreover, the maintenance of high fluid pressures requires specialized conditions15 and weak mineral phases are not present in sufficient abundance to satisfy weak fault models16, so weak faults remain largely unexplained. Here we provide laboratory evidence for a brittle, frictional weakening mechanism based on common fault zone fabrics. We report on the frictional strength of intact fault rocks sheared in their in situ geometry. Samples with well-developed foliation are extremely weak compared to their powdered equivalents. Micro- and nanostructural studies show that frictional sliding occurs along very fine-grained foliations composed of phyllosilicates (talc and smectite). When the same rocks are powdered, frictional strength is high, consistent with cataclastic processes. Our data show that fault weakness can occur in cases where weak mineral phases constitute only a small percentage of the total fault rock and that low friction results from slip on a network of weak phyllosilicate-rich surfaces that define the rock fabric. The widespread documentation of foliated fault rocks along mature faults in different tectonic settings and from many different protoliths4,17–19 suggests that this mechanism could be a viable explanation for fault weakening in the brittle crust