594 research outputs found
Determination of aqueous two-phase system phase-forming components in the presence of bovine serum albumin
In the current work, the quantification of different poly(ethylene glycol) (PEG)-potassium phosphate/sodium citrate aqueous two-phase system (ATPS) phase-forming components was investigated by using conductivity and refractive index measurements. For this purpose, refractive index and conductivity calibration curves were obtained for ATPS at different pH values in the presence of different bovine serum albumin (BSA) concentrations. Whereas BSA had no effect on the conductivity, it had a considerable effect on the refractive index. Finally, a convenient dilution of the samples prior to the ATPS constituent determination is needed to ensure no significant influence from BSA
Cost-effective 3D scanning and printing technologies for outer ear reconstruction: Current status
Current 3D scanning and printing technologies offer not only state-of-the-art developments in the field of medical imaging and bio-engineering, but also cost and time effective solutions for surgical reconstruction procedures. Besides tissue engineering, where living cells are used, bio-compatible polymers or synthetic resin can be applied. The combination of 3D handheld scanning devices or volumetric imaging, (open-source) image processing packages, and 3D printers form a complete workflow chain that is capable of effective rapid prototyping of outer ear replicas. This paper reviews current possibilities and latest use cases for 3D-scanning, data processing and printing of outer ear replicas with a focus on low-cost solutions for rehabilitation engineering
One-step-purification of penicillin G amidase from cell lysate using ion-exchange membrane adsorbers
This study describes the purification of penicillin G amidase (PGA) by ion exchange membrane adsorbers in a one-step-process. Preliminary experiments with high-throughput screening devices in microliter scale (8-strip modules) were performed to find suitable purification strategy and appropriate ion exchange ligands as well as basic process conditions for binding and elution. Best purification results were achieved by strong cation-exchange (S-) membrane adsorbers loaded with 2ml/min enzyme solution at pH 6.0 and eluted at pH 6.0 with 0.05M NaCl, which led to a high yield of bound PGA (98%) without any visible remains of host cell proteins and with a residual enzyme activity of 80-85%. The binding of PGA to the S-membrane was further investigated in an upscaling to milliliter scale with LP15 modules and breakthrough curves were determined by varying the flow rates: the PGA-binding to S-membrane adsorbers is independent of the flow rate. Dynamic binding capacities were estimated to be 0.69mg PGA/cm2 (25.5mg/ml) for 10% breakthrough respectively 0.95mg/cm2 (35.2mg/ml) for 100% breakthrough. Finally, real cell lysate samples from Escherichia coli culture containing PGA were processed under the found optimal conditions. Despite exceeded loading PGA was isolated from this complex mixture successfully fourfold concentrated and with a purification factor of 101.3 and a resulting specific activity of 4.97U/mg.BMBF/BIOCATALYSIS2021DFG/EXC/REBIRT
Paving the way to overcome antifungal drug resistance: current practices and novel developments for rapid and reliable antifungal susceptibility testing
The past year has established the link between the COVID-19 pandemic and the global spread of severe fungal infections; thus, underscoring the critical need for rapid and realizable fungal disease diagnostics. While in recent years, health authorities, such as the Centers for Disease Control and Prevention, have reported the alarming emergence and spread of drug-resistant pathogenic fungi and warned against the devastating consequences, progress in the diagnosis and treatment of fungal infections is limited. Early diagnosis and patient-tailored therapy are established to be key in reducing morbidity and mortality associated with fungal (and cofungal) infections. As such, antifungal susceptibility testing (AFST) is crucial in revealing susceptibility or resistance of these pathogens and initiating correct antifungal therapy. Today, gold standard AFST methods require several days for completion, and thus this much delayed time for answer limits their clinical application. This review focuses on the advancements made in developing novel AFST techniques and discusses their implications in the context of the practiced clinical workflow. The aim of this work is to highlight the advantages and drawbacks of currently available methods and identify the main gaps hindering their progress toward clinical application
Gelatin-methacryloyl (GelMA) hydrogels with defined degree of functionalization as a versatile toolkit for 3D cell culture and extrusion bioprinting
Gelatin-methacryloyl (GelMA) is a semi-synthetic hydrogel which consists of gelatin derivatized with methacrylamide and methacrylate groups. These hydrogels provide cells with an optimal biological environment (e.g., RGD motifs for adhesion) and can be quickly photo-crosslinked, which provides shape fidelity and stability at physiological temperature. In the present work, we demonstrated how GelMA hydrogels can be synthesized with a specific degree of functionalization (DoF) and adjusted to the intended application as a three-dimensional (3D) cell culture platform. The focus of this work lays on producing hydrogel scaffolds which provide a cell promoting microenvironment for human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) and are conductive to their adhesion, spreading, and proliferation. The control of mechanical GelMA properties by variation of concentration, DoF, and ultraviolet (UV) polymerization conditions is described. Moreover, hAD-MSC cell viability and morphology in GelMA of different stiffness was evaluated and compared. Polymerized hydrogels with and without cells could be digested in order to release encapsulated cells without loss of viability. We also demonstrated how hydrogel viscosity can be increased by the use of biocompatible additives, in order to enable the extrusion bioprinting of these materials. Taken together, we demonstrated how GelMA hydrogels can be used as a versatile tool for 3D cell cultivation
Improved production and in situ recovery of sesquiterpene (+)-zizaene from metabolically-engineered E. Coli
The sesquiterpene (+)-zizaene is the direct precursor of khusimol, the main fragrant compound of the vetiver essential oil from Chrysopogon zizanioides and used in nearly 20% of men’s fine perfumery. The biotechnological production of such fragrant sesquiterpenes is a promising alternative towards sustainability; nevertheless, product recovery from fermentation is one of the main constraints. In an effort to improve the (+)-zizaene recovery from a metabolically-engineered Escherichia coli, we developed an integrated bioprocess by coupling fermentation and (+)-zizaene recovery using adsorber extractants. Initially, (+)-zizaene volatilization was confirmed from cultivations with no extractants but application of liquid–liquid phase partitioning cultivation (LLPPC) improved (+)-zizaene recovery nearly 4-fold. Furthermore, solid–liquid phase partitioning cultivation (SLPPC) was evaluated by screening polymeric adsorbers, where Diaion HP20 reached the highest recovery. Bioprocess was scaled up to 2 L bioreactors and in situ recovery configurations integrated to fermentation were evaluated. External recovery configuration was performed with an expanded bed adsorption column and improved (+)-zizaene titers 2.5-fold higher than LLPPC. Moreover, internal recovery configuration (IRC) further enhanced the (+)-zizaene titers 2.2-fold, whereas adsorption velocity was determined as critical parameter for recovery efficiency. Consequently, IRC improved the (+)-zizaene titer 8.4-fold and productivity 3-fold from our last report, achieving a (+)-zizaene titer of 211.13 mg L−1 and productivity of 3.2 mg L−1 h−1. This study provides further knowledge for integration of terpene bioprocesses by in situ product recovery, which could be applied for many terpene studies towards the industrialization of fragrant molecules
Surface flow profiles for dry and wet granular materials by Particle Tracking Velocimetry; the effect of wall roughness
Two-dimensional Particle Tracking Velocimetry (PTV) is a promising technique
to study the behaviour of granular flows. The aim is to experimentally
determine the free surface width and position of the shear band from the
velocity profile to validate simulations in a split-bottom shear cell geometry.
The position and velocities of scattered tracer particles are tracked as they
move with the bulk flow by analyzing images. We then use a new technique to
extract the continuum velocity field, applying coarse-graining with the
postprocessing toolbox MercuryCG on the discrete experimental PTV data. For
intermediate filling heights, the dependence of the shear (or angular) velocity
on the radial coordinate at the free surface is well fitted by an error
function. From the error function, we get the width and the centre position of
the shear band. We investigate the dependence of these shear band properties on
filling height and rotation frequencies of the shear cell for dry glass beads
for rough and smooth wall surfaces. For rough surfaces, the data agrees with
the existing experimental results and theoretical scaling predictions. For
smooth surfaces, particle-wall slippage is significant and the data deviates
from the predictions. We further study the effect of cohesion on the shear band
properties by using small amount of silicon oil and glycerol as interstitial
liquids with the glass beads. While silicon oil does not lead to big changes,
glycerol changes the shear band properties considerably. The shear band gets
wider and is situated further inward with increasing liquid saturation, due to
the correspondingly increasing trend of particles to stick together
- …