Equilibrium Clusters in Concentrated Lysozyme Protein Solutions

We have studied the structure of salt-free lysozyme at 293 K and pH 7.8 using molecular simulations and experimental SAXS effective potentials between proteins at three volume fractions, 0.012, 0.033, and 0.12. We found that the structure of lysozyme near physiological conditions strongly depends on the volume fraction of proteins. The studied lysozyme solutions are dominated by monomers only for <0.012; for the strong dilution 70% of proteins are in a form of monomers. For 0.033 only 20% of proteins do not belong to a cluster. The clusters are mainly elongated. For 0.12 almost no individual particles exits, and branched, irregular clusters of large extent appear. Our simulation study provides new insight into the formation of equilibrium clusters in charged protein solutions near physiological conditions

Influence of activated carbon surface oxygen functionalities on SO2 physisorption – Simulation and experiment

The influence of the gradual oxidation of carbons on SO2 physisorption was studied, by comparison of experimental and simulated SO2 adsorption isotherms. The results confirmed a significant impact of surface groups on the SO2 adsorption. The simulations also revealed a similar, to that observed experimentally, effect of the increase in the percentage of the smallest micropores on adsorption isotherms. The isotherms were analysed using the CMMS model. The conclusion is that this model seems to be a good and sensitive tool for studying SO2 physisorption mechanism since a very good qualitative agreement between the experimental and simulated data was observed

Synergetic effect of carbon nanopore size and surface oxidation on CO2 capture from CO2/CH4 mixtures

We have studied the synergetic effect of confinement (carbon nanopore size) and surface chemistry (the number of carbonyl groups) on CO2 capture from its mixtures with CH4 at typical operating conditions for industrial adsorptive separation (298 K and compressed CO2CH4 mixtures). Although both confinement and surface oxidation have an impact on the efficiency of CO2/CH4 adsorptive separation at thermodynamics equilibrium, we show that surface functionalization is the most important factor in designing an efficient adsorbent for CO2 capture. Systematic Monte Carlo simulations revealed that adsorption of CH4 either pure or mixed with CO2 on oxidized nanoporous carbons is only slightly increased by the presence of functional groups (surface dipoles). In contrast, adsorption of CO2 is very sensitive to the number of carbonyl groups, which can be examined by a strong electric quadrupolar moment of CO2. Interestingly, the adsorbed amount of CH4 is strongly affected by the presence of the co-adsorbed CO2. In contrast, the CO2 uptake does not depend on the molar ratio of CH4 in the bulk mixture. The optimal carbonaceous porous adsorbent used for CO2 capture near ambient conditions should consist of narrow carbon nanopores with oxidized pore walls. Furthermore, the equilibrium separation factor was the greatest for CO2/CH4 mixtures with a low CO2 concentration. The maximum equilibrium separation factor of CO2 over CH4 of ∼18–20 is theoretically predicted for strongly oxidized nanoporous carbons. Our findings call for a review of the standard uncharged model of carbonaceous materials used for the modeling of the adsorption separation processes of gas mixtures containing CO2 (and other molecules with strong electric quadrupolar moment or dipole moment)

The influence of the carbon surface chemical composition on Dubinin-Astakhov equation parameters calculated from SF(6) adsorption data-grand canonical Monte Carlo simulation

Using grand canonical Monte Carlo simulation we show, for the first time, the influence of the carbon porosity and surface oxidation on the parameters of the Dubinin-Astakhov (DA) adsorption isotherm equation. We conclude that upon carbon surface oxidation, the adsorption decreases for all carbons studied. Moreover, the parameters of the DA model depend on the number of surface oxygen groups. That is why in the case of carbons containing surface polar groups, SF(6) adsorption isotherm data cannot be used for characterization of the porosity

Applicability of molecular simulations for modelling the adsorption of the greenhouse gas CF4 on carbons

Tetrafluoromethane, CF4, is powerful greenhouse gas, and the possibility of storing it in microporous carbon has been widely studied. In this paper we show, for the first time, that the results of molecular simulations can be very helpful in the study of CF4 adsorption. Moreover, experimental data fit to the results collected from simulations. We explain the meaning of the empirical parameters of the supercritical Dubinin–Astakhov model proposed by Ozawa and finally the meaning of the parameter k of the empirical relation proposed by Amankwah and Schwarz

Stability of coordination polymers in water: state of the art and towards a methodology for nonporous materials

A mini review on the study concerning water stability of coordination polymers (CPs) is presented. Next, following the procedure proposed recently by Gelfand and Shimizu (Dalton Trans 45:3668-3678, 2016) the stability of three cysteine (Cys)containing CPs is investigated. The stability of studied CPs decreases in the order: Zn(Cys)(2)>Mg(Cys)(2)>Ca(Cys)(2) H2O. For the latternever reported before, the structure is additionally determined and it is proved that water is located in the first coordination sphere. It is shown that for nonporous CPs, in contrast to the porous ones, the immersion in water at 20 degrees C is more drastic for studied solids than the harsh humid conditions (80 degrees C at 90% R.H.). Finally all materials are assigned to the hydrolytic stability groups and it is concluded that the stability of studied CPs correlates well with the standard reduction potentials. This leads to the conclusion that the application of more inert metal as a node causes larger stability of studied CPs

Electrophoretic deposition of layer-by-layer unsheathed carbon nanotubes - A step towards steerable surface roughness and wettability

It is well known that carbon nanotube (CNT) oxidation (usually with concentrated HNO3) is a major step before the electrophoretic deposition (EPD). However, the recent discovery of the “onion effect” proves that multiwalled carbon nanotubes are not only oxidized, but a simultaneous unsheathing process occurs. We present the first report concerning the influence of unsheathing on the properties of the thus-formed CNT surface layer. In our study we examine how the process of gradual oxidation/unsheathing of a series of multiwalled carbon nanotubes (MWCNTs) influences the morphology of the surface formed via EPD. Taking a series of well-characterized and gradually oxidized/unsheathing Nanocyl™ MWCNTs and performing EPD on a carbon fiber surface, we analyzed the morphology and wettability of the CNT surfaces. Our results show that the water contact angle could be gradually changed in a wide range (125–163°) and the major property determining its value was the diameter of aggregates formed before the deposition process in the solvent. Based on the obtained results we determined the parameters having a crucial influence on the morphology of created layers. Our results shed new light on the deposition mechanism and enable the preparation of surfaces with steerable roughness and wettability

Morphologically disordered pore model for characterization of micro-mesoporous carbons

We present a new morphologically disordered slit-shaped pore (MDSP) model for simulating gas adsorption in micro-mesoporous carbonaceous materials. The MDSP model qualitatively accounts for the inherent roughness of carbon pore walls in accord with the atomistic structural model of LMA10 reference carbon material. The MDSP model is applied to pore size distribution (PSD) calculations from nitrogen adsorption isotherms measured at 77.4 K in the range of pore widths from 0.72 to 40 nm. The MDSP model improves significantly the nitrogen adsorption porosimetry and, being fully atomistic, it is transferable to study various adsorbate-adsorbent systems. Computations of PSD functions for a series of carbonaceous materials, including activated carbon fiber, granular activated carbons, synthetic activated carbons showed that MDSP generates smooth Gaussian-type PSD functions with a well-defined average pore size. Furthermore, PSD functions computed from the MDSP model are free from the artificial gaps in the region of narrow micropores (∼1 nm and ∼2 nm) predicted from the standard slit-shaped pore models with ideal graphite-like walls. MDSP is not only a complementary model to existing approaches, such as quench-solid density functional theory method, but it paves the way to efficient atomistic simulations of various compounds within morphologically disordered carbon nanopores

Super-sieving effect in phenol adsorption from aqueous solutions on nanoporous carbon beads

Removal of aromatic contaminants, like phenol, from water can be efficiently achieved by preferential adsorption on porous carbons which exhibit molecular sieving properties. Here, we present nanoporous carbon beads exhibiting an outstanding sieving effect in phenol adsorption from aqueous solution at neutral pH, which is evidenced experimentally and theoretically. The molecular sieving with pure phenol adsorbed phase is achieved by tuning the pore size and surface chemistry of the adsorbent. This study elucidates the essential role of hydrophobic interactions in narrow carbon micropores in removal and clean-up of water from organic pollutants. Furthermore, we suggest a new theoretical approach for evaluation of phenol adsorption capacity that is based on the Monte Carlo simulation of phenol adsorption with the relevance to the pore size distribution function determined by the density functional theory method from low temperature nitrogen adsorption