246 research outputs found
Probing High Frequency Noise with Macroscopic Resonant Tunneling
We have developed a method for extracting the high-frequency noise spectral
density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT)
rate measurements. The extracted noise spectral density is consistent with that
of an ohmic environment up to frequencies ~ 4 GHz. We have also derived an
expression for the MRT lineshape expected for a noise spectral density
consisting of such a broadband ohmic component and an additional strongly
peaked low-frequency component. This hybrid model provides an excellent fit to
experimental data across a range of tunneling amplitudes and temperatures
A scalable readout system for a superconducting adiabatic quantum optimization system
We have designed, fabricated and tested an XY-addressable readout system that
is specifically tailored for the reading of superconducting flux qubits in an
integrated circuit that could enable adiabatic quantum optimization. In such a
system, the flux qubits only need to be read at the end of an adiabatic
evolution when quantum mechanical tunneling has been suppressed, thus
simplifying many aspects of the readout process. The readout architecture for
an -qubit adiabatic quantum optimization system comprises hysteretic dc
SQUIDs and rf SQUID latches controlled by bias lines. The
latching elements are coupled to the qubits and the dc SQUIDs are then coupled
to the latching elements. This readout scheme provides two key advantages:
First, the latching elements provide exceptional flux sensitivity that
significantly exceeds what may be achieved by directly coupling the flux qubits
to the dc SQUIDs using a practical mutual inductance. Second, the states of the
latching elements are robust against the influence of ac currents generated by
the switching of the hysteretic dc SQUIDs, thus allowing one to interrogate the
latching elements repeatedly so as to mitigate the effects of stochastic
switching of the dc SQUIDs. We demonstrate that it is possible to achieve
single qubit read error rates of with this readout scheme. We have
characterized the system-level performance of a 128-qubit readout system and
have measured a readout error probability of in the presence
of optimal latching element bias conditions.Comment: Updated for clarity, final versio
Geometrical dependence of low frequency noise in superconducting flux qubits
A general method for directly measuring the low-frequency flux noise (below
10 Hz) in compound Josephson junction superconducting flux qubits has been used
to study a series of 85 devices of varying design. The variation in flux noise
across sets of qubits with identical designs was observed to be small. However,
the levels of flux noise systematically varied between qubit designs with
strong dependence upon qubit wiring length and wiring width. Furthermore,
qubits fabricated above a superconducting ground plane yielded lower noise than
qubits without such a layer. These results support the hypothesis that
localized magnetic impurities in the vicinity of the qubit wiring are a key
source of low frequency flux noise in superconducting devices.Comment: 5 pages, 5 figure
- …