64 research outputs found
Molybdate Based Ceramic Negative-Electrode Materials for Solid Oxide Cells
Novel molybdate materials with varying Mo valence were synthesized as possible negative-electrode materials for solid oxide cells. The phase, stability, microstructure and electrical conductivity were characterized. The electrochemical activity for H2O and CO2 reduction and H2 and CO oxidation was studied using simplified geometry point-contact electrodes. Unique phenomena were observed for some of the materials - they decomposed into multiple phases and formed a nanostructured surface upon exposure to operating conditions (in certain reducing atmospheres). The new phases and surface features enhanced the electrocatalytic activity and electronic conductivity. The polarization resistances of the best molybdates were two orders of magnitude lower than that of donor-doped strontium titanates. Many of the molybdate materials were significantly activated by cathodic polarization, and they exhibited higher performance for cathodic (electrolysis) polarization than for anodic (fuel cell) polarization, which makes them especially interesting for use in electrolysis electrodes.</jats:p
Performance Factors and Sulfur Tolerance of Metal Supported Solid Oxide Fuel Cells with Nanostructured Ni:GDC Infiltrated Anodes
A Physically based Model for interpretating the Electrocatalytic Activity of Nanoparticles for Solid Oxide Fuel Cell Anodes
Kinetic Studies on Ni-YSZ Composite Electrodes
AC and DC techniques were applied to investigate the electrochemical reaction kinetics of porous composite Ni/8-mol% yttria-stabilized zirconia (Ni/8YSZ) solid oxide cell (SOC) electrodes using a novel pseudo-3-electrode cell geometry. From OCV impedance spectra an activation energy Ea
of 1.13 eV, pre-factor Îłan
of 3.7â105âT, hydrogen and steam partial pressure dependencies a and b respectively of -0.07 and 0.22 were determined. DC current density vs. overpotential curves compared with those predicted using the determined kinetic parameters. Apparent Butler-Volmer charge transfer coefficients Îą were determined from the current density vs. overpotential curves. Values ranging from 0.57 at 650 °C to 0.64 at 850 °C were determined from the anodic branch and 0.85 to 0.81 from the cathodic branch in the same range, with higher fitting accuracy in the anodic branch. The lower fitting accuracy of the cathodic branch and the need for different Îą values for each branch suggests that a simple BV model of the measured electrode kinetics is insufficient and/or different reaction mechanisms might be occurring in anodic vs cathodic polarization.</jats:p
Microstructural and electrical characterization of Nb-doped SrTiO3 â YSZ composites for electrodes in solid oxide electrolysis applications
- âŚ