1,667 research outputs found

    A selective control information detection scheme for OFDM receivers

    Get PDF
    In wireless communications, both control information and payload (user-data) are concurrently transmitted and required to be successfully recovered. This paper focuses on block-level detection, which is applicable for detecting transmitted control information, particularly when this information is selected or chosen from a finite set of information that are known at both transmitting and receiving devices. Using an orthogonal frequency division multiplexing architecture, this paper investigates and evaluates the performance of a time-domain decision criterion in comparison with a form of Maximum Likelihood (ML) estimation method. Unlike the ML method, the proposed time-domain detection technique requires no channel estimation as it uses the correlation (in the time-domain) that exists between the received and the transmitted selective information as a means of detection. In comparison with the ML method, results show that the proposed method offers improved detection performance, particularly when the control information consists of at least 16. However, the implementation of the proposed method requires a slightly increased number of mathematical computations

    A low complexity SI sequence estimator for pilot-aided SLM–OFDM systems

    Get PDF
    Selected mapping (SLM) is a well-known method for reducing peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems. However, as a consequence of implementing SLM, OFDM receivers often require estimation of some side information (SI) in order to achieve successful data recovery. Existing SI estimation schemes have very high computational complexities that put additional constraints on limited resources and increase system complexity. To address this problem, an alternative SLM approach that facilitates estimation of SI in the form of phase detection is presented. Simulations show that this modified SLM approach produces similar PAPR reduction performance when compared to conventional SLM. With no amplifier distortion and in the presence of non-linear power amplifier distortion, the proposed SI estimation approach achieves similar data recovery performance as both standard SLM–OFDM (with perfect SI estimation) and also when SI estimation is implemented through the use of an existing frequency-domain correlation (FDC) decision metric. In addition, the proposed method significantly reduces computational complexity compared with the FDC scheme and an ML estimation scheme

    A joint OFDM PAPR reduction and data decoding scheme with no SI estimation

    Get PDF
    The need for side information (SI) estimation poses a major challenge when selected mapping (SLM) is implemented to reduce peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems. Recent studies on pilot-assisted SI estimation procedures suggest that it is possible to determine the SI without the need for SI transmission. However, SI estimation adds to computational complexity and implementation challenges of practical SLM-OFDM receivers. To address these technical issues, this paper presents the use of a pilot-assisted cluster-based phase modulation and demodulation procedure called embedded coded modulation (ECM). The ECM technique uses a slightly modified SLM approach to reduce PAPR and to enable data recovery with no SI transmission and no SI estimation. In the presence of some non-linear amplifier distortion, it is shown that the ECM method achieves similar data decoding performance as conventional SLM-OFDM receiver that assumed a perfectly known SI and when the SI is estimated using a frequency-domain correlation approach. However, when the number of OFDM subcarriers is small and due to the clustering in ECM, the modified SLM produces a smaller PAPR reduction gain compared with conventional SLM

    Selective Control Information Detection in 5G Frame Transmissions

    Get PDF
    Control signalling information within wireless communication systems facilitates efficient management of limited wireless resources, plays a key role in improving system performance of 5G systems. This chapter focuses detection of one particular form of control information, namely, selective control information (SCI). Maximum-likelihood (ML) is one of the conventional SCI detection techniques. Unfortunately, it requires channel estimation, which introduces some implementation constraints and practical challenges. This chapter uses generalized frequency division multiplexing (GFDM) to evaluate and demonstrate the detection performance of a new form of SCI detection that uses a time-domain correlation (TDC) technique. Unlike the ML scheme, the TDC technique is a form of blind detection that has the capability to improve detection performance with no need for channel estimation. In comparison with the ML based receiver, results show that the TDC technique achieves improved detection performance. In addition, the detection performance of the TDC technique is improved with GFDM receivers that use the minimum mean square error (MMSE) scheme compared with the zero-forcing (ZF) technique. It is also shown that the use of a raised cosine (RC) shaped GFDM transmit filter improves detection performance comparison with filters that employ root raised cosine (RRC) pulse shape

    Self-Assembly in the Growth of Precious Opal

    Full text link
    It is proposed that primary nucleation of amorphous microspherulites of hydrated silica in natural proto-precious-opal can be followed by a long range superlattice ordering process by means of electrostatic self-assembly. Necessary conditions in the thermodynamics are a high surface charge density on microspherulite surfaces, a long Debye length and an appropriate number density of nucleation centres. A further chemical requirement is a high alkaline environmental pH from 9 to 10. It is also proposed that the characteristic concentric spherical shell-like structure of spherulites, centred on primary nuclei, are due to sequential deposition of intrinsic salts which precipitate out when the corresponding solubility limits in the liquid are successively exceeded. It can be that the better-known sedimentation of microspherulites under gravity only plays part in the final stabilization period of overall growth.Comment: 12 pages pdf http://dx.doi.org/10.1016/j.jcrysgro.2009.09.04

    Improving Reliability of Subject-Level Resting-State fMRI Parcellation with Shrinkage Estimators

    Full text link
    A recent interest in resting state functional magnetic resonance imaging (rsfMRI) lies in subdividing the human brain into anatomically and functionally distinct regions of interest. For example, brain parcellation is often used for defining the network nodes in connectivity studies. While inference has traditionally been performed on group-level data, there is a growing interest in parcellating single subject data. However, this is difficult due to the low signal-to-noise ratio of rsfMRI data, combined with typically short scan lengths. A large number of brain parcellation approaches employ clustering, which begins with a measure of similarity or distance between voxels. The goal of this work is to improve the reproducibility of single-subject parcellation using shrinkage estimators of such measures, allowing the noisy subject-specific estimator to "borrow strength" in a principled manner from a larger population of subjects. We present several empirical Bayes shrinkage estimators and outline methods for shrinkage when multiple scans are not available for each subject. We perform shrinkage on raw intervoxel correlation estimates and use both raw and shrinkage estimates to produce parcellations by performing clustering on the voxels. Our proposed method is agnostic to the choice of clustering method and can be used as a pre-processing step for any clustering algorithm. Using two datasets---a simulated dataset where the true parcellation is known and is subject-specific and a test-retest dataset consisting of two 7-minute rsfMRI scans from 20 subjects---we show that parcellations produced from shrinkage correlation estimates have higher reliability and validity than those produced from raw estimates. Application to test-retest data shows that using shrinkage estimators increases the reproducibility of subject-specific parcellations of the motor cortex by up to 30%.Comment: body 21 pages, 11 figure

    ISAAC Advanced Composites Research Testbed

    Get PDF
    The NASA Langley Research Center is acquiring a state-of-art composites fabrication capability to support the Center's advanced research and technology mission. The system introduced in this paper is named ISAAC (Integrated Structural Assembly of Advanced Composites). The initial operational capability of ISAAC is automated fiber placement, built around a commercial system from Electroimpact, Inc. that consists of a multi-degree of freedom robot platform, a tool changer mechanism, and a purpose-built fiber placement end effector. Examples are presented of the advanced materials, structures, structural concepts, fabrication processes and technology development that may be enabled using the ISAAC system. The fiber placement end effector may be used directly or with appropriate modifications for these studies, or other end effectors with different capabilities may either be bought or developed with NASA's partners in industry and academia

    ISAAC - A Testbed for Advanced Composites Research

    Get PDF
    The NASA Langley Research Center is acquiring a state-of-art composites fabrication environment to support the Center's research and technology development mission. This overall system described in this paper is named ISAAC, or Integrated Structural Assembly of Advanced Composites. ISAAC's initial operational capability is a commercial robotic automated fiber placement system from Electroimpact, Inc. that consists of a multi-degree of freedom commercial robot platform, a tool changer mechanism, and a specialized automated fiber placement end effector. Examples are presented of how development of advanced composite materials, structures, fabrication processes and technology are enabled by utilizing the fiber placement end effector directly or with appropriate modifications. Alternatively, end effectors with different capabilities may either be bought or developed with NASA's partners in industry and academia
    • …
    corecore