Magnetized Fast Isochoric Laser Heating for Efficient Creation of Ultra-High-Energy-Density States

The quest for the inertial confinement fusion (ICF) ignition is a grand challenge, as exemplified by extraordinary large laser facilities. Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in ICF ignition sparks. This avoids the ignition quench caused by the hot spark mixing with the surrounding cold fuel, which is the crucial problem of the currently pursued ignition scheme. High-intensity lasers efficiently produce relativistic electron beams (REB). A part of the REB kinetic energy is deposited in the core, and then the heated region becomes the hot spark to trigger the ignition. However, only a small portion of the REB collides with the core because of its large divergence. Here we have demonstrated enhanced laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a kilo-tesla-level magnetic field that is applied to the transport region from the REB generation point to the core which results in guiding the REB along the magnetic field lines to the core. 7.7 $\pm$ 1.3 % of the maximum coupling was achieved even with a relatively small radial area density core ($\rho R$ $\sim$ 0.1 g/cm$^2$). The guided REB transport was clearly visualized in a pre-compressed core by using Cu-$K_\alpha$ imaging technique. A simplified model coupled with the comprehensive diagnostics yields 6.2\% of the coupling that agrees fairly with the measured coupling. This model also reveals that an ignition-scale areal density core ($\rho R$ $\sim$ 0.4 g/cm$^2$) leads to much higher laser-to-core coupling ($>$ 15%), this is much higher than that achieved by the current scheme

Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments

In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University.Ikeda T., Kaneyasu Y., Hosokawa H., et al. Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments. Nuclear Fusion 63, 016010 (2023); https://doi.org/10.1088/1741-4326/aca2ba

Hot Electron Spectra in Plain, Cone and Integrated Targets for FIREX-I using Electron Spectrometer

The traditional fast ignition scheme is that a compressed core created by an imploding laser is auxiliary heated and ignited by the hot electrons (produced by a short pulse laser guided through the cone). Here, the most suitable target design for fast ignition can be searched for by comparison of the spectra between varied targets using an electron spectrometer

Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 1018 W/cm2, respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.Kojima S., Abe Y., Miura E., et al. Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system. Optics Express 30, 43491 (2022); https://doi.org/10.1364/oe.475945

Direct fast heating efficiency of a counter-imploded core plasma employing a laser for fast ignition experiments (LFEX)

Fast heating efficiency when a pre-imploded core is directly heated with an ultraintense laser (heating laser) was investigated. \u27Direct heating\u27 means that a heating laser hits a pre-imploded core without applying either a laser guiding cone or an external field. The efficiency, η, is defined as the increase in the internal core energy divided by the energy of the heating laser. Six beams (output of 1.6 kJ) from the GEKKO XII (GXII) green laser system at the Institute of Laser Engineering (ILE), Osaka University were applied to implode a spherical deuterated polystyrene (CD) shell target to form a dense core. The DD-reacted protons and the core x-ray emissions showed a core density of 2.8 ± 0.7 g cm−3, or 2.6 times the solid density. Furthermore, DD-reacted thermal neutrons were utilized to estimate the core temperature between 600 and 750 eV. Thereafter, the core was directly heated by a laser for fast-ignition experiments (LFEX, an extremely energetic ultrashort pulse laser) at ILE with its axis lying along or perpendicular to the GXII bundle axis, respectively. The former and latter laser configurations were termed \u27axial\u27 and \u27transverse modes\u27, respectively. The η was estimated from three independent methods: (1) the core x-ray emission, (2) the thermal neutron yield, and (3) the runaway hot electron spectra. For the axial mode, 0.8%< η <2.1% at low power (low LFEX energy) and 0.4%< η <2.5% at high power (high LFEX energy). For the transverse mode, 2.6%< η <7% at low power and 1.5%< η <7.7% at high power. Their efficiencies were compared with that in the uniform implosion mode using 12 GXII beams, 6% < η <12%, which appeared near to the η for the transverse mode, except that the error bar is very large

Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments

先端科学・社会共創推進機構In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University