860 research outputs found
Il risarcimento del danno ambientale da inquinamento: modelli di analisi geochimica valutazione monetaria di un eco-socio-sistema fluviale in Sicilia.
Dissolved major and trace elements in meteoric depositions on the flanks of Mt. Etna (Italy): the impact of volcanic activity on the environment
In the framework of the “Save the Etna World” research project, which investigates the impact of the volcanic activity on the surrounding environment, three bulk collectors were deployed on the flank of the Mt. Etna volcano to collect the meteoric depositions. The sampling sites were at distances between 5.5 and 13 km from the summit vents of the volcano on its eastern flank, that is the most exposed to the volcanic plume due to the high-altitude prevailing winds direction. The sites were selected in order to have a gradient of exposition with respect to the volcanic emissions, the most exposed being CIT, the intermediate ILI and the least NIC. Samples were collected monthly from July 2017 to July 2018 and analysed for major ions and for a large suite of trace elements. The influence of volcanic emissions is evidenced by the low pH of the collected depositions in the most exposed site, showing values mostly below 3.5 and never exceeding 5.72. The lowest values are related to high fluoride, chloride and sulfate concentrations in the collected water, deriving from the acid gases (HF, HCl and SO2) of the volcanic plume. The other two sites show pH values in range from 3.95 to 7.21. While the lowest values indicate a lower but significant volcanic influence, the highest values can be related to the dissolution of geogenic (mainly carbonate) particulate of local or regional (Saharan) origin. The latter process is evidenced by high concentrations of Ca and HCO3 in the samples with the highest pHs. Trace elements show almost all higher concentrations in the most exposed site. Highly volatile elements like Pb, Te and Tl, which are known to have strong enrichment factors in volcanic plumes with respect to the average upper crust composition, are found at CIT at concentrations always at least one order of magnitude higher than at NIC. Also lithophile elements like Si, Al, Ti and Fe are sometimes strongly enriched at CIT deriving from the interaction of the acid gases of the plume with the occasionally emitted volcanic ash. These new results confirm the importance of meteoric deposition as main carrier of volcanogenic elements to earth’s surface. “Etna World” is a fascinating natural laboratory, and the study of atmospheric depositions in this peculiar environment allows to understand better the general processes that influence the cycles of trace metals. Furthermore, the quantitative estimation of both emission and deposition of volcanogenic elements is a key factor for complementary studies on the geochemical mobility of trace elements and their distribution between atmosphere, soils, vegetation, and lastly, animals and humans in active volcanic areas
Estimation of CO2 release from thermal springs to the atmosphere
Introduction Geodynamically active regions have long been recognized as areas of anomalous Earth degassing [Irwin and Barnes, 1980]. Areas found at plate boundaries are characterized by seismic, volcanic and geothermal activity as well as ore deposition. These processes are enhanced by the circulation of hydrothermal fluids in the crust, which transport volatiles from the deep crust or mantle to the surface [King, 1986]. Kerrick and Caldera, [1998], were the first to indicate the significant contribution of the CO2 degassing by extensional tectonic and hydrothermal activity in metamorphic belts during the Phanerozoic. Moreover, further studies concerning gas emissions from diffuse degassing tectonic structures on various geological regimes suggested in their majority elevated CO2 concentrations [Klusman, 1993]. In fact, it is worth noting that the estimated global hydrothermal CO2 flux from subaerial geothermal environments can be comparable to that of direct volcanic discharges [Kerrick et al., 1995; Seward and Kerrick, 1996]. Study Area The back-arc geothermal fields of Greece include, among others, the Tertiary sedimentary basins of both Sperchios Basin and north Euboea, which are located in central Greece. Their tectonic activity contributes in crust thinning [Papadakis at al., 2016 and references therein] and elevated heat flow values [Fytikas and Kolios, 1979]. These geothermal anomalies due to the tectonic activity and the geological and volcanic regime are expressed as hot springs (Ypatis, Psoroneria, Thermopyles and Kamena Vourla in Sperchios Basin and Edipsos and Ilion in north Euboea). Tectonics of central Greece seems to be of particular interest as major fault structures are found in the area. Sperchios Basin was formed through the activity of WNW-ESE trending faults [Georgalas and Papakis, 1966; Marinos et al., 1973], whilst the Sperchios tectonic graben itself is considered to be the extension of the North Anatolia strike-slip fault. Moreover, in the north Euboean Gulf, the major fault structures are those of the Atalanti Fault Zone (AFZ) that consist of several segments of normal faults, trending about NW-SE [Pavlides et al., 2004]. Materials and Methods Six groups of springs (Ypatis, Psoroneria, Thermopyles, Kamena Vourla, Edipsos and Ilion) were investigated in this study. Bubbling gases were sampled using an inverted funnel positioned above the bubbles and stored in glass flasks equipped with two stopcocks until analysis. Samples for dissolved gas analyses were collected in glass vials and were sealed underwater. In the laboratory, the concentrations of He, H2, H2S, O2, N2, CO2 and CH4, on the samples were analysed by an Agilent 7890B gas chromatograph with Ar as carrier. The total CO2 emitted through bubbling was measured at 6 different pools (Psoroneria, Psoroneria 2,Thermopyles, Leonidas, Kamena Vourla and Ilion), whereas at other springs (Koniavitis-Sperchios Basin, Edipsos-Damaria and Edipsos-Thermopotamos) an estimation of the release was made by visual inspection. The CO2 fluxes were measured using the floating chamber method [Mazot and Bernard, 2015] that was equipped with a portable fluxmeter (WEST Systems, Italy) based on the accumulation chamber method as suggested by Chiodini et al., [1998]. The flux data were processed with both the Graphical Statistical Approach (GSA) and the Stochastic Simulation Approach (SSA), with the latter being based on the algorithm of sequential Gaussian simulation [Deutsch and Journal 1998; Cardellini et al., 2003]. Zonal Statistics on the final CO2 flux maps was obtained using the ArcMap 10.3 (ESRI) Spatial Analyst tool and were used to estimate the total CO2 output to the atmosphere. Results and Conclusions Carbon dioxide is the prevailing gas species for the great majority of the under investigation sites, with only gases collected in the area of Kamena Vourla (Kamena Vourla and Koniavitis) being rich in N2. The total bubbling CO2 emission from the pools to the atmosphere ranged from 314 to 44,800 g/m2/day. At sites with greater surfaces, the CO2 release was estimated after performing direct measurements (28-Thermopyles, 74-Psoroneria) with the most elevated values being found in the areas of Thermopyles and Psoroneria (1 and 2 t/d, respectively) (Tab. 1); the maps were drawn following the SSA (Figure 1). The outgoing channels of the springs showed an elevated flow (> 250 l/s) of gas-charged water (> 15 mmol/l of dissolved CO2). Even though no bubbling was visible along the stream, the dissolved CO2 content sampled at different distances from springs of Psoroneria and Thermopyles, decreased up to an order of magnitude after few hundreds of metres, indicating an evident and intense, although not visible, CO2 degassing versus the atmosphere. Physico-chemical parameters (temperature and pH) along the outlet channels were also measured at the same sampling points showing correlations (negative in terms of temperature; T decreased from 33.1 to 30.3 and 40.8 to 39 °C, respectively and positive in terms of pH; pH increased from 6.11 to 7.05 and 6.05 to 7.70, respectively) with the distance. The CO2 output of the outgoing channels to the atmosphere was quantified considering thedifference between the initial and the final content of the dissolved CO2 as well as the water flow, obtaining values of > 10 t/d for Thermopyles and ~9 t/d for Psoroneria. Estimations were also made at Ypatis, Kamena Vourla, Koniavitis and Edipsos, where the mean values reached 1 t/d of CO2 for each spring. The obtained CO2 released from the bubbling pools to the atmosphere was directly compared with the one estimated from the outgoing channels (Tab. 1). The degassing along the outflow channel was almost always higher than the corresponding bubbling pool, sometimes even an order of magnitude, suggesting that most of the degassing is “hidden”. For each site the amount of CO2 released versus the atmosphere was calculated as (Figure 2): ΦtotCO2 = Φpool + Φstream The total CO2 released to the atmosphere as estimated for the study area is at ~ 30 t/d, with the major contribution deriving from the degassing along the outflow channels of the thermal springs. Such output is comparable and sometimes higher than that of each single active volcanic system along the South Aegean Volcanic Arc (15 - 38 t/d) and highlights the importance of “hidden” degassing along CO2 - oversaturated streams
Microbial impact on the isotope composition of methane in both thermal and hyperalkaline waters of central Greece
Introduction The different origins of methane can be subdivided in biogenic (either directly produced by microbial activity or deriving by decay of organic matter at T > 150\ub0C) and abiogenic (from pure inorganic reactions). Among the latter, one of the most debated origins comes from serpentinization processes of ultramafic rocks in ophiolitic sequences at low temperatures (T < 80 \ub0C). Moreover, further secondary processes (diffusion, inorganic or microbial oxidation, etc.) may also contribute and thus mask the original chemical and/or isotope composition. Primary and secondary processes acting on CH4 can be recognised mainly through its isotope (d13C and d2H) composition and the ratio between CH4 and C2+C3 light hydrocarbons [Bernard et al. 1978; Schoell 1980]. Microorganisms may be involved in the methane cycle not only as active producers but also as consumers. Methane oxidizing bacteria (or methanotrophs) are microorganisms with the ability to use methane as the only source of carbon for energy and biomass production. Methanotrophs are ubiquitous and play an important role in the global carbon cycle, acting as a natural filter between the subsoil and the atmosphere. They were isolated from several environments such as soils, wetlands, freshwater, marine sediments, water columns, groundwater, rice paddies, and peat bogs [Murrell and Jetten, 2009]. Some species were adapted also at extreme environments characterized by high temperature (up to 81.6 \ub0C), extremely low or high pHs (1.5-11) or even anaerobic conditions. Due to the fact that methanotrophs metabolize preferentially light isotopes, biologic methane oxidation brings sometimes to extremely positive d13C and d2H values [Cadieux et al., 2016]. The Greek territory belongs to the geodynamically active Alpine-Himalayan orogenic belt. As such, it shows intense seismic activity, active volcanic systems and areas of enhanced geothermal fluxes. One of these areas is the Sperchios Basin and the northern part of Euboea Island in central Greece, where thermal manifestations are widespread [D\u2019Alessandro et al., 2014]. The complex geology of Greece includes also two important parallel running ophiolitic belts, with the Othrys Massif (central Greece) belonging to the westernmost of them. In and around this wide ophiolite outcrop, some cold hyperalkaline and some hypothermal (T < 30\ub0C) alkaline waters are present. In the present paper we discuss data about chemistry and methane isotope composition of bubbling or dissolved gases in both thermal springs and hyperalkaline springs of Central Greece. Sampling and Analytical Methods Free bubbling gas samples were taken using an inverted funnel. All free gas samples were stored in Pyrex bottles with two vacuum stopcocks. Samples for dissolved gas analyses were collected in glass vials sealed underwater. In the laboratory, the chemical analyses were carried out by gaschromatography (Agilent 7890B GC System) using Ar as the carrier gas. Dissolved gases were extracted after equilibrium was reached at constant temperature with a host-gas (high-purity argon) injected in the sample bottle. The measurement precision was better than \ub15% for common gases and \ub110% for trace gases such as the alkanes. The chemical composition of the dissolved gas phase was obtained from the gas-chromatographic analyses taking into account the solubility coefficients (Bunsen coefficient \u201c\u3b2\u201d, ccgas/mlwater STP) of each gas specie, the volume of gas extracted and the volume of the water sample (details in Capasso and Inguaggiato, [1998] and Liotta and Martelli, [2012]). Starting from the total amount of dissolved gases (ccSTP/L) we calculated the relative abundances for every single gas species in equilibrium with the dissolved gas phase and expressed the analytical results in \u3bcmol/mol of gas at atmospheric pressure, allowing the comparison of dissolved gases with free gases. Carbon and hydrogen isotope compositions of CH4 were measured using a Thermo TRACE GC and a Thermo GC/C III interfaced to a Delta Plus XP gas source mass spectrometer. 13C/12C ratios are reported here as d13C values (\ub10.1 \u2030) with respect to the V-PDB standard. 1H/2H ratios are reported here as d2H values (\ub12 \u2030) with respect to the V-SMOW standard. The oxygen and hydrogen isotopic compositions of water were analysed on unfiltered samples with the use of Analytical Precision AP 2003 and FinniganMAT Delta Plus IRMS devices, respectively. The isotope ratios are expressed as the deviation per mil (\u3b4\u2030) from the reference V-SMOW. The uncertainties (\ub11\u2030 were \ub10.1% for \u3b418O and \ub11% for \u3b42H. Results Five thermal springs, with temperatures from 33 to 80\ub0C, were sampled in the study area. All show elevated fluxes of bubbling gases whose prevailing species are either CO2 or N2. Methane concentrations range from 27 to 4000 \u3bcmol/mol, whilst the isotope composition of CH4 covers a wide range with d13C values ranging from -21.7 to +16.9\u2030 and d2H values ranging from -124 to +370\u2030. Seven alkaline hypothermal waters were collected in five areas (Amplas, Platystomo, Kaitsa, Smokovo and Soulanta) while 10 hyperalkaline waters in two areas (Archani and Ekkara); all samples were collected from different springs and wells and some of the sites presented bubbling. All samples present low concentrations of H2 (from <2 to 2500 \u3bcmol/mol), CO2 (up to 26,000 but generally below 1000 \u3bcmol/mol) and O2 (up to 16,000 but generally below 3000 \u3bcmol/mol). Gases in alkaline waters (pH <10) are in their majority dominated by CH4 (from 128,000 to 915,000 \u3bcmol/mol). Hyperalkaline (pH > 11) waters are N2 dominated (from 727,000 to 977,000 \u3bcmol/mol) and have CH4 concentrations from 11,500 to 279,000 \u3bcmol/mol. Also all these samples display a wide range of isotope compositions of CH4 (d13C from -74.5 to -14.5 \u2030 and d2H from -343 to -62 \u2030). Discussion Thermal springs Methane in most of the bubbling gases found in the thermal waters of Greece display a small range in isotope composition close to -21\u2030 for carbon and to -130\u2030 for hydrogen [Daskalopoulou et al., 2018] and plot in the middle of the field of volcanic and geothermal systems (Figure 1). In the study area, only the hottest (Edipsos) of the thermal manifestations displays similar values. All the remaining samples fit a methane oxidation trend reaching extremely positive values (Figure 1). If we consider the lowest values as the deep hydrothermal marker the obtained \u394H/\u394C values range between 5 and 13 which are close to those typical of microbially driven oxidation [Coleman et al., 1981]. Although the outlet temperature of the hottest manifestations is at the upper limit for methanotrophic microrganisms [Sharp et al., 2014], we can hypothesize that environmental conditions are not favourable for their survival at this site. On the contrary, methanotrophs can thrive in the sites characterized by lower temperatures (33-65 \ub0C), strongly consuming methane. The most positive values were measured at Psoroneria and indicate a very high consumption fraction. Considering again the values of Edipsos as the deep hydrothermal marker, a Rayleigh fractionation modelling in a closed system and kinetic fractionation factors for microbial oxidation [Coleman et al., 1981] we estimate a consumption of more than the 75% of the initial CH4. Alkaline and hyperalkaline waters Alkaline waters present mostly isotope values for CH4 compatible with a biogenic origin (d13C from - 62.0 to -37.5 \u2030 and d2H from -247 to -154 \u2030). Only the sample of Kaitsa falls above the biogenic field, indicating possible fractionation due to CH4 oxidation (Figure 2). Most of the hyperalkaline waters have CH4 isotope values compatible with an abiogenic origin through serpentinization processes (Figure 2). But some of the CH4 collected in the hyperalkaline waters show values falling in the biogenic field, with at points, very negative d13C values (< -70\u2030). Methanogens were found also in other hyperalkaline waters taking advantage of the presence of sometimes very high hydrogen concentrations [Woycheese et al., 2015; Miller et al., 2018]. Also methanotrophs were rarely found in hyperalkaline waters [Woycheese et al., 2015; Miller et al., 2018] and their presence may justify the most positive values found in the study area (Figure 2)
Catalogue of the main gas manifestation of Greece: Geochemical characterisation and preliminary gas hazard assessment
Quantification of gaseous emissions in geological systems is an important branch because it is a major source of greenhouse gas to the atmospheric budget. Of geological environments, there are two different categories: the first category includes emissions of the predominant carbon dioxide (CO 2), while the second includes emissions of the predominant methane (CH4). The Hellenic territory has a very complex geodynamic setting deriving from a long and complicated geological history. It is strongly characterized by intense seismic activity and enhanced geothermal gradient. This activity, with the contribution of an active volcanic arc, favours the existence of many cold and thermal gas manifestations. Geogenic sources release huge amounts of gases, which, apart from having important influences on the global climate, could also have a strong impact on human health. Geochemical studies based on the isotopic composition of carbon and hydrogen, along with helium isotopic ratios have become a good indicator of the origin of the gas. The isotopic ratio 13C/12C of CO 2 expressed in δ 13C (provides important information about the amount of CO 2 released from the Earth's crust or mantle. For methane, carbon and hydrogen isotopic compositions and C1/(C2+C3) hydrocarbon ratios can characterize the origin of methane: biogenic (thermogenic or microbial) or abiogenic. Helium isotopic ratios provide additional information about crustal or mantle origin of the gas. In the present work, a large set of chemical and isotopic data is presented aiming at the identification of areas with geogenic gas emissions and their characterization in terms of different gas composition and origin. The present catalogue should be the base for the estimation total nationwide geogenic CO 2 and CH4 fluxes
Chemistry and fluxes of major and trace element from worldwide passive degassing volcanoes: a critical review
Volcanic emissions represent one of the most important natural sources of trace elements (e.g. As, Cd, Cu, Hg, Pb, Sb, Tl and Zn) into the atmosphere, sequentially influencing the hydrosphere, lithosphere and biosphere. The human health hazard during episodic volcanic eruptions generally follows from deposition of coarse and fine particles (2.5-10 and < 2.5 μm) that produces effects such as asthma and lung and respiratory disease. Regarding passive degassing volcanoes, the harmful effects of fluorine fumigation are known both for vegetation (foliar necrosis) and human/animals (fluorosis), but only a few studies have been focused on the effects of potentially toxic trace elements. From a review published work on the metal output from active worldwide volcanoes, 52 publications (the first dating back to the 70’s) were identified, 13 of which on Etna and the others from some of the world most active volcanoes: Mt. St. Helens, Stromboli, Vulcano, Erebus, Merapi, White Island, Kilauea, Popocatepetl, Galeras,Indonesian arc, Satasuma and Masaya. In general, the review shows that available information is scarce and incomplete. We compiled a database both for concentrations and fluxes of 59 chemical elements (major and trace), which allowed us to constrain the compositional and output range. In this study we also present unpublished results from Etna (Italy), Turrialba (Costa Rica), Nyiragongo (Democratic Republic of Congo), Mutnovsky and Gorely (Kamchatka), Aso Asama and Oyama (Japan). Concentrations of major and trace elements were obtained by direct sampling of volcanic gases and aerosols on
filters. Sulfur and halogens were collected by using filter-packs methodology, and analyzed by ion chromatography.
Untreated filters for particulate were acid digested and analyzed by ICP-OES and ICP-MS. Sulfur to trace element ratios were related to sulfur fluxes to indirectly estimate elemental fluxes. Etna confirms to be one of the greatest point sources in the world. Nyiragongo results to be an additional large source of metals to the atmosphere, especially considering its persistent state of degassing from the lava lake. Turrialba and Gorely also have high emission rates of trace metals considering the global range. Only Mutnovsky volcano show values which are sometimes lower than the range obtained from the review, consistent with its dormant (fumarolic) stage of activity.
The accurate estimation of individual and global volcanic emissions of trace metals is still affected by a high level of uncertainty. The latter depends on the large variability in the emission of the different volcanoes, and on their changing stage of activity. Moreover, only few of the potential sources in the world have been directly measured. This preliminary work highlights the need to expand the current dataset including many other active volcanoes for better constraining the global volcanic trace metal fluxes
Risks related to gas manifestations in the Hellenic territory
Like other geodynamically active areas, Greece is affected by a large number of geogenic gas manifestations. These occur either in form of point sources (fumaroles, mofettes, bubbling gases) or as diffuse emanations. We produced a catalogue of the geogenic gas manifestations of Greece also considering few literature data. Collected samples were analysed for their chemical (He, Ne, Ar, O2, N2, H2, H2S, CO, CH4 and CO2) and isotopic composition (He, C and N). Geogenic gases, apart from having important influences on the global climate, could have strong impact on human health. Gas hazard is often disregarded because fatal episodes are often not correctly attributed. Geodynamic active areas release geogenic gases for million years over wide areas and the potential risks should not be disregarded. A preliminary estimation of the gas hazard has been made for the last 20 years considering the whole population of Greece. In this period at least 2 fatal episodes with a total of 3 victims could be certainly attributed to CO2. This would give a risk of 1.310-8 fatality per annum. Such value, probably underestimated, is much lower than most other natural or anthropogenic risks. Nevertheless this risk, being unevenly distributed along the whole territory, should not be overlooked and better constrained in areas with high density of gas manifestations and high soil gas fluxes
Catalogue of the main gas manifestation of Greece: a basis for nationwide estimations of gas hazard and total geogenic gas output
- …