Effect of reductants and stabilizers on ageing of gold nanoparticles at pH2–12 and application of nano-gold to study non-cyanide leaching in sodium hypochlorite/chloride solutions using UV–Visible spectroscopy

Despite the growing interest in non-cyanide lixiviants for leaching gold from ores/concentrates and recyclable waste material one of the main challenges in testing novel lixiviants is the slow reaction of gold dissolution which generally takes long hours of experimentation and high cost. The increased interest in naturally occurring nanoparticulate gold component in ore deposits and exploration samples also encourages research in this area. Gold nanoparticles in aqueous medium exhibit strong characteristic absorption peaks in the visible region of the electromagnetic spectrum due to the Surface Plasmon Resonance (SPR). The very large surface area to volume ratio of nanoparticles leads to fast dissolution kinetics. These two properties allow chloride leaching of gold to be conveniently studied by the use of UV–Visible spectroscopy of gold nanoparticles produced in the laboratory. However, the method of production also controls the properties of gold nanoparticles. In this study, nine methods were used for the synthesis of gold nanoparticles using different reagents as reductants and stabilizers: D-glucose, trisodium citrate, sodium borohydride, ascorbic acid, heparin, hydrazine sulfate, monosodium glutamate, gelatine, starch (both with and without ethylene glycol), polyvinyl alcohol (PVA), cetyltrimethylammonium bromide (CTAB) and tannic acid. The UV–Visible spectra and the dissolution rates per unit surface area of nanoparticles in NaOCl/NaCl solutions are compared to show similar leaching behaviour between nano-gold and massive gold which encourages further studies with other non-cyanide gold lixiviants

Separation of Pt(IV), Rh(III) and Fe(III) in acid chloride leach solutions of glass scraps by solvent extraction with various extractants

Solvent extraction experiments were conducted to recover pure Pt(IV) and Rh(III) from the chloride leach liquor of glass industry scraps containing a small amount of Fe(III) using Alamine 336, TOPO, TBP and Cyanex 923. The Pt(IV) and Fe(III) were selectively extracted by Cyanex 923 leaving Rh(III) in the raffinate, while only Fe(III) was extracted by TBP. The Pt(IV) in the loaded Cyanex 923 phase was first selectively stripped over Fe(III) by NaSCN and then the remaining Fe(III) was stripped by HCl solution. The Fe(III) in the loaded TBP phase was easily stripped by dilute HCl solution. The McCabe-Thiele diagrams for the extraction of Pt(IV) by Cyanex 923 and of Fe(III) by TBP were constructed. Based on the obtained results, a flowsheet for the separation of three metals from the real leaching solution of glass industry scraps was proposed

Nanorobot: Modelling And Simulation.

This research addresses the state of the art in nanorobot design and simulation focusing on the leukemia disease as well as ongoing applications on addressing the challenges posed by cancer treatment, especially chemotherapy

Recovery of cobalt sulfate from spent lithium ion batteries by reductive leaching and solvent extraction with Cyanex 272

Cobalt sulfate was recovered from crushed and screened prismatic type spent lithium ion batteries (LIBs) containing 5-20% Co, 5-7% Li, 5-10% Ni, 15% organic chemicals, and 7% plastics together with Cu, Al, Fe, and Mn. Cobalt was reductively leached from the - 16 mesh fraction in 1 h by stirring with 2 M H2SO4 and 6 vol.% H2O2, at 60 °C and 300 rpm using a solid/liquid ratio of 100 g/L to give a cobalt concentration of 28 g/L, corresponding to a leaching efficiency of > 99%. Metal ion impurities such as copper, iron, and aluminium were precipitated as hydroxides from solution by adjusting pH to 6.5. Cobalt was then selectively extracted from the purified aqueous phase by equilibrating with 50% saponified 0.4 M Cyanex 272 at an equilibrium pH ∼ 6. The McCabe-Thiele plot predicted 99.9% cobalt extraction in a 2 stage counter-current operation with A/O ratio of 1/2. Separation factors for the extraction of Co/Li and Co/Ni at pH 6 were close to 750. The stripping of the loaded organic phase with 2 M H2SO4 produced a solution of 96 g/L Co from which pure pigment grade cobalt sulfate could be recovered by evaporation/recrystallisation. Overall, 92% cobalt could be recovered from the spent lithium ion batteries

Reductive atmospheric acid leaching of lateritic smectite/nontronite ores in H2SO4/Cu(II)/SO2 solutions

Despite the success of reductive atmospheric acid leaching (RAAL) of limonitic nickel laterite ores in recent studies limited attempt has been made to apply this method to smectite/nontronite ores of different mineralogies. A comparative study of four smectite/nontronite ores in this study showed that the use of 700 kg H2SO4/ton dry ore leaches only 74-86% Ni, 37-76% Co, 47-58% Fe and 24-66% Mn at 90 °C from slurries of 20-35% (w/w) pulp density even after 10 h, depending upon the mineralogy. These values increased to 90-97% Ni, 94-97% Co, 92-98% Mn and 72-85% Fe in the presence of Cu(II)/SO2. The first order dependence of initial fraction of iron, aluminium and nickel leached from a typical smectite ore in the first 0.5 h on the initial acid concentration provides evidence for the involvement of hydrogen ions in the surface reaction. Low activation energy of 10 kJ/mol based on the fraction of nickel leached in the first 0.5 h indicates a diffusion controlled reaction. This is supported by the applicability of a shrinking core kinetic model for metal dissolution over the first 2 h, with different apparent rate constants (kap) depending upon the iron oxide content, mineralogy and porosity. A log-log plot of kap for ores with high iron content as a function of acid concentration agrees reasonably well with the correlation already established for the leaching of nickel from limonitic laterite and manganese nodules. Thus, initial fast leaching can be related to the higher porosity and a rate controlling step which involves the diffusion of H+ through a thickening solid layer. The slow leaching at latter stages is a result of low remnant acid, thickening solid layer and changes in mineral composition

Extraction of Scandium (III) from acidic solutions using organo-phosphoric acid reagents: A comparative study

Comparative and synergistic solvent extraction of Sc(III) using two phosphoric acidic reagents such as di-(2-ethyhexyl) phosphoric acid and 2,4,4,tri-methyl,pentyl-phosphinic acid was investigated. Slope analysis method suggests a cation exchange reaction of Sc(III) with both extractants at a molar ratio of extractant: Sc(III) = 2.5:1 at equilibrium pH< 1.5. The plot of log D vs. log [Extractant] yield the slope (n) value as low as 1.2-1.3 and as high as n=7 at low and high extrcatant concentration level, respectively. Extraction isotherm study predicted the need of 2 stages at A: O=1:4 and A: O=1:3 using 0.1 M D2EHPA and 0.1 M Cyanex 272, respectively. Stripping of Sc (III) was carried out at varied NaOH concentration to ascertain the optimum stripping condition for effective enrichment of metal. The predicted stripping condition (2)-stages with A: O=1:3 and 1:4 for D2EHPA and Cyanex 272, respectively) obtained from Mc-Cabe Thiele plot was further validated by 6-cycles CCS study. An actual leach solution of Mg-Sc alloy bearing 1.0 g/L of Sc (III), 2.5 g/L of Mg and 0.2 M HCl was subjected for selective separation of Sc at the optimum condition. The counter current simulation (CCS) study for both extraction and stripping of actual solution resulted quantitative separation of Sc with ∼12 fold enrichment. The organic phase before and after loading of Sc (III) along with the diluents was characterized by FTIR to ascertain the phase transportation of Sc (III)

Assembly of female and male hihi genomes (stitchbird; Notiomystis cincta) enables characterization of the W chromosome and resources for conservation genomics

A high-quality reference genome can be a valuable resource for threatened species by providing a foundation to assess their evolutionary potential to adapt to future pressures such as environmental change. We assembled the genome of a female hihi (Notiomysits cincta), a threatened passerine bird endemic to Aotearoa New Zealand. The assembled genome is 1.06 Gb, and is of high quality and highly contiguous, with a contig N50 of 7.0 Mb, estimated QV of 44 and a BUSCO completeness of 96.8%. A male assembly of comparable quality was generated in parallel. A population linkage map was used to scaffold the autosomal contigs into chromosomes. Female and male sequence coverage and comparative genomics analyses were used to identify Z-, and W-linked contigs. In total, 94.6% of the assembly length was assigned to putative nuclear chromosome scaffolds. Native DNA methylation was highly correlated between sexes, with the W chromosome contigs more highly methylated than autosomal chromosomes and Z contigs. 43 differentially methylated regions were identified, and these may represent interesting candidates for the establishment or maintenance of sex differences. By generating a high-quality reference assembly of the heterogametic sex, we have created a resource that enables characterization of genome-wide diversity and facilitates the investigation of female-specific evolutionary processes. The reference genomes will form the basis for fine-scale assessment of the impacts of low genetic diversity and inbreeding on the adaptive potential of the species and will therefore enable tailored and informed conservation management of this threatened taonga (treasured) species

Prevalence, trends, and drivers of the utilization of unskilled birth attendants during democratic governance in Nigeria from 1999 to 2018

Comprehensive epidemiological data on prevalence, trends, and determinants of the use of unskilled birth attendants (traditional birth attendants (TBAs) and other unskilled birth attendants) are essential to policy decision-makers and health practitioners, to guide efforts and resource allocation. This study investigated the prevalence, trends, and drivers of the utilization of unskilled birth attendants during democratic governance in Nigeria from 1999 to 2018. The study used the Nigeria Demographic and Health Surveys data for the years 1999 (n = 3552), 2003 (n = 6029), 2008 (n = 28,647), 2013 (n = 31,482), and 2018 (34,193). Multivariate multinomial logistic regression was used to investigate the association between socioeconomic, demographic, health-service, and community-level factors with the utilization of TBAs and other unskilled birth attendants in Nigeria. Between 1999 and 2018, the study showed that the prevalence of TBA-assisted delivery remained unchanged (20.7%; 95% CI: 18.0–23.7% in 1999 and 20.5%; 95% CI: 18.9–22.1% in 2018). The prevalence of other-unskilled-birth-attendant use declined significantly from 45.5% (95% CI: 41.1–49.7%) in 2003 to 36.2% (95% CI: 34.5–38.0%) in 2018. Higher parental education, maternal employment, belonging to rich households, higher maternal age (35–49 years), frequent antenatal care (ANC) (≥4) visits, the proximity of health facilities, and female autonomy in households were associated with lower odds of unskilled birth attendants’ utilization. Rural residence, geopolitical region, lower maternal age (15–24 years), and higher birth interval (≥2 years) were associated with higher odds of unskilled-birth-attendant-assisted deliveries. Reducing births assisted by unskilled birth attendants in Nigeria would require prioritized and scaled-up maternal health efforts that target all women, especially those from low socioeconomic backgrounds, those who do not attend antenatal care, and/or those who reside in rural areas