62 research outputs found
Improving simultaneous saccharification and co-fermentation of pretreated wheat straw using both enzyme and substrate feeding
<p>Abstract</p> <p>Background</p> <p>Simultaneous saccharification and co-fermentation (SSCF) has been recognized as a feasible option for ethanol production from xylose-rich lignocellulosic materials. To reach high ethanol concentration in the broth, a high content of water-insoluble solids (WIS) is needed, which creates mixing problems and, furthermore, may decrease xylose uptake. Feeding of substrate has already been proven to give a higher xylose conversion than a batch SSCF. In the current work, enzyme feeding, in addition to substrate feeding, was investigated as a means of enabling a higher WIS content with a high xylose conversion in SSCF of a xylose-rich material. A recombinant xylose-fermenting strain of <it>Saccharomyces cerevisiae </it>(TMB3400) was used for this purpose in fed-batch SSCF experiments of steam-pretreated wheat straw.</p> <p>Results</p> <p>By using both enzyme and substrate feeding, the xylose conversion in SSCF could be increased from 40% to 50% in comparison to substrate feeding only. In addition, by this design of the feeding strategy, it was possible to process a WIS content corresponding to 11% in SSCF and obtain an ethanol yield on fermentable sugars of 0.35 g g<sup>-1</sup>.</p> <p>Conclusion</p> <p>A combination of enzyme and substrate feeding was shown to enhance xylose uptake by yeast and increase overall ethanol yield in SSCF. This is conceptually important for the design of novel SSCF processes aiming at high-ethanol titers. Substrate feeding prevents viscosity from becoming too high and thereby allows a higher total amount of WIS to be added in the process. The enzyme feeding, furthermore, enables keeping the glucose concentration low, which kinetically favors xylose uptake and results in a higher xylose conversion.</p
Effects of pretreatments of Napier Grass with deionized water, sulfuric acid and sodium hydroxide on pyrolysis oil characteristics
The depletion of fossil fuel reserves has led to
increasing interest in liquid bio-fuel from renewable biomass. Biomass is a complex organic material consisting of
different degrees of cellulose, hemicellulose, lignin,
extractives and minerals. Some of the mineral elements
tend to retard conversions, yield and selectivity during
pyrolysis processing. This study is focused on the extraction of mineral retardants from Napier grass using deionized water, dilute sodium hydroxide and sulfuric acid and subsequent pyrolysis in a fixed bed reactor. The raw biomass was characterized before and after each pretreatment
following standard procedure. Pyrolysis study was conducted
in a fixed bed reactor at 600 o�C, 30 �C/min and 30 mL/min N2 flow. Pyrolysis oil (bio-oil) collected was analyzed using standard analytic techniques. The bio-oil yield and characteristics from each pretreated sample were compared with oil from the non-pretreated sample. Bio-oil
yield from the raw sample was 32.06 wt% compared to
38.71, 33.28 and 29.27 wt% oil yield recorded from the
sample pretreated with sulfuric acid, deionized water and
sodium hydroxide respectively. GC–MS analysis of the oil
samples revealed that the oil from all the pretreated biomass had more value added chemicals and less ketones and
aldehydes. Pretreatment with neutral solvent generated
valuable leachate, showed significant impact on the ash
extraction, pyrolysis oil yield, and its composition and
therefore can be regarded as more appropriate for thermochemical conversion of Napier grass
- …