CVD of CrO2: towards a lower temperature deposition process

We report on the synthesis of highly oriented a-axis CrO2 films onto (0001) sapphire by atmospheric pressure CVD from CrO3 precursor, at growth temperatures down to 330 degree Celsius, i.e. close to 70 degrees lower than in published data for the same chemical system. The films keep the high quality magnetic behaviour as those deposited at higher temperature, which can be looked as a promising result in view of their use with thermally sensitive materials, e.g. narrow band gap semiconductors.Comment: 13 pages, 4 figure

PHENIX first measurement of the J/psi elliptic flow parameter v2 in Au+Au collisions at sqrt(sNN) = 200 GeV

Recent results indicate that the J/psi suppression pattern differs with rapidity showing a larger suppression at forward rapidity. J/psi suppression mechanisms based on energy density (such as color screening, interaction with co-movers, etc.) predict the opposite trend. On the other hand, it is expected that more c\bar{c} pairs should be available to form quarkonia at mid-rapidity via recombination. Some models provide a way to differentiate J/psi production from initially produced c\bar{c} pairs and final state recombination of uncorrelated pairs, via the rapidity and transverse momentum dependence of the elliptic flow (v2). During 2007 data taking at RHIC, a large sample of Au+Au collisions at sqrt(sNN)=200 GeV was collected. The statistics has been increased compared to previous 2004 data set, thus allowing a more precise measurement of the J/psi production at both mid and forward rapidity. Furthermore, the PHENIX experiment benefited from the addition of a new detector, which improves the reaction plane resolution and allows us to measure the J/psi v2. Comparing this measurement to the positive D-mesons v2 (through non-photonic electron decays) will help constraining the J/psi production mechanisms and getting a more precise picture of the proportion of J/psi coming from direct production or charm quark coalescence. Details on how the J/psi v2 is measured at both rapidities are presented. The J/psi v2 as a function of transverse momentum are compared to existing models.Comment: 4 pages, 3 figures, Quark Matter 2008 proceeding

KrP laser CVD of chromium oxide by photodissociation of Cr(CO)(6)

This work reports on the synthesis of chromium oxide thin films prepared by photodissociation of Cr(CO)(6) in an oxidizing atmosphere, using a pulsed UV laser (KrF, lambda = 248 nm). The experimental conditions, which should enable the synthesis of CrO2, are discussed and results on the deposition of CrxOy films on Al2O3 (0001) substrates are presented

Ferromagnetic order in aged Co-doped TiO2 anatase nanopowders

Oxide based diluted magnetic semiconductor (DMS) materials have been a subject of increasing interest due to reports of room temperature ferromagnetism in several systems and their potential use in the development of spintronic devices. However, concerns on the stability of the magnetic properties of different DMS systems have been raised. Their magnetic moment is often unstable, vanishing with a characteristic decay time of weeks or months, which precludes the development of real applications. This paper reports on the ferromagnetic properties of two-year-aged Ti1-xCoxO2-{\delta} reduced anatase nanopowders with different Co contents (0.03<x<0.10). Aged samples retain rather high values of magnetization, remanence and coercivity which provide strong evidence for a quite preserved long-range ferromagnetic order. In what concern Co segregation, some degree of metastability of the diluted Co doped anatase structure could be inferred in the case of the sample with the higher Co content.Comment: 15 pages, 5 figure

Using field evaluation and systematic iteration to rationalize the accumulation of omega-3 long-chain polyunsaturated fatty acids in transgenic Camelina sativa

The Brassicaceae Camelina sativa (gold of pleasure) is now an established niche crop and being used as a transgenic host for a range of novel seed traits. Most notable of these is the accumulation of omega-3 long-chain polyunsaturates such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), fatty acids normally only found in marine organisms. As part of continued efforts to optimize the accumulation of these non-native fatty acids via seed-specific expression of algal genes, a new series of iterative constructs was built and introduced into Camelina. Seed fatty acid composition was determined, and the presence of EPA and DHA was confirmed. To provide an additional level of evaluation, full environmental release was carried out on selected events, providing a real-world gauntlet against which to assess the performance of these novel lines. Composition of the seed oil triacylglycerol was determined by mass spectrometry, allowing for conclusions as to the contribution of different activities to the final accumulation of EPA and DHA. Since these data were derived from field-grown material, they also represent a robust demonstration of the stability of the omega-3 LC-PUFA trait in Camelina. We propose that field trialling should be routinely incorporated in the plant synthetic biology 'design-build-test-learn' cycle

KrF pulsed laser deposition of chromium oxide thin films from Cr8O21 targets

Chromium oxides, CrxOy, are of great interest due to the wide variety of their technological applications. Among them, CrO2 has been extensively investigated in recent years because it is an attractive compound for use in spintronic heterostructures. However, its synthesis at low temperatures has been a difficult task due to the metastable nature of this oxide. This is indeed essential to ensure interface quality and the ability to coat thermal-sensitive materials such as those envisaged in spintronic devices. Pulsed Laser Deposition (PLD) is a technique that has the potential to meet the requirements stated above. In this work, we describe our efforts to grow chromium oxide thin films by PLD from Cr8O21 targets, using a KrF excimer laser. The as-deposited films were investigated by X-ray diffraction and Rutherford backscattering spectrometry. Structural and chemical composition studies showed that the films consist of a mixture of amorphous chromium oxides exhibiting different stoichiometries depending on the processing parameters, where nanocrystals of mainly Cr2O3 are dispersed. The analyses do not exclude the possibility of co-deposition of Cr2O3 and a low fraction of CrO2

Magnetic properties of Co-doped TiO(2) anatase nanopowders

This letter reports on the magnetic properties of Ti(1-x)Co(x)O(2) anatase phase nanopowders with different Co contents. It is shown that oxygen vacancies play an important role in promoting long-range ferromagnetic order in the material studied in addition to the transition-metal doping. Furthermore, the results allow ruling out the premise of a strict connection between Co clustering and the ferromagnetism observed in the Co:TiO(2) anatase system

Structural and Microanalytical Studies of CrO2 Thin Films on c-Sapphire by High Resolution Electron Microscopy Methods

Chromium dioxide (CrO2) has been extensively used in the magnetic recording industry. However, it is its ferromagnetic half-metallic nature that has more recently attracted much attention, primarily for the development of spintronic devices. CrO2 is the only stoichiometric binary oxide theoretically predicted to be fully spin polarized at the Fermi level. It presents a Curie temperature of ∼ 396 K, i.e. well above room temperature, and a magnetic moment of 2 mB per formula unit. However an antiferromagnetic native insulating layer of Cr2O3 is always present on the CrO2 surface which enhances the CrO2 magnetoresistance and might be used as a barrier in magnetic tunnel junctions

Structural, electrical and magnetic studies of Co:SnO2 and (Co,Mo):SnO2 films prepared by pulsed laser deposition

Here we report on the structural, optical, electrical and magnetic properties of Co-doped and (Co,Mo)-codoped SnO2 thin films deposited on r-cut sapphire substrates by pulsed laser deposition. Substrate temperature during deposition was kept at 500 degrees C. X-ray diffraction analysis showed that the undoped and doped films are crystalline with predominant orientation along the [1 0 1] direction regardless of the doping concentration and doping element. Optical studies revealed that the presence of Mo reverts the blue shift trend observed for the Co-doped films. For the Co and Mo doping concentrations studied, the incorporation of Mo did not contribute to increase the conductivity of the films or to enhance the ferromagnetic order of the Co-doped films. (C) 2012 Elsevier B.V. All rights reserved

A unified meson-baryon potential

We study the spectra of mesons and baryons, composed of light quarks, in the framework of a semirelativistic potential model including instanton induced forces. We show how a simple modification of the instanton interaction in the baryon sector allows a good description of the meson and the baryon spectra using an interaction characterized by a unique set of parameters.Comment: 7 figure