Processing and characterization of a new biodegradable composite made of a PHB/V matrix and regenerated cellulosic fibers

In this study, a biodegradable composite consisting of a degradable continuous cellulosic fiber and a degradable polymer matrix—poly(3-hydroxybutyrate)-co-poly(3-hydroxyvalerate (PHB/V with 19% HV)—was developed. The composite was processed by impregnating the cellulosic fibers on-line withPHB/V powder in a fluidization chamber. The impregnated roving was then filament wound on a plate and hot-pressed. The resulting unidirectional composite plates were mechanically tested and optically characterized by SEM. The fiber content was 9.9 ±0.9 vol% by volumetric determination. The fiber content predicted by the rule of mixture for unidirectional composites was 13.8 ±1.4 vol%. Optical characterization showed that the fiber distribution was homogeneous and a satisfactory wetting of the fibers by the matrix was achieved. Using a blower to remove excess matrix powder during processing increased the fiber content to 26.5 ±3.3 vol % (volumetric) or 30.0 ±0.4 vol% (rule of mixture). The tensile strength of the composite parallel to the fiber direction was 128 ±12 MPa (10 vol% fiber) up to 278 ±48 MPa (26.5 vol% fiber), compared to 20 MPa for the PHB/V matrix. The Young's modulus was 5.8 ±0.5 GPa (10 vol% fiber) and reached 11.4 ±0.14 GPa (26.5 vol% fiber), versus 1 GPa for the matri

Large-Cavity Coronoids with Different Inner and Outer Edge Structures

Coronoids, polycyclic aromatic hydrocarbons with geometrically defined cavities, are promising model structures of porous graphene. Here, we report the on-surface synthesis of C168 and C140 coronoids, referred to as [6]- and [5]coronoid, respectively, using 5,9-dibromo-14-phenylbenzo[m]tetraphene as the precursor. These coronoids entail large cavities (>1 nm) with inner zigzag edges, distinct from their outer armchair edges. While [6]coronoid is planar, [5]coronoid is not. Low-temperature scanning tunneling microscopy/spectroscopy and noncontact atomic force microscopy unveil structural and electronic properties in accordance with those obtained from density functional theory calculations. Detailed analysis of ring current effects identifies the rings with the highest aromaticity of these coronoids, whose pattern matches their Clar structure. The pores of the obtained coronoids offer intriguing possibilities of further functionalization toward advanced host-guest applications

Electron Wave Function in Armchair Graphene Nanoribbons

By using analytical solution of a tight-binding model for armchair nanoribbons, it is confirmed that the solution represents the standing wave formed by intervalley scattering and that pseudospin is invariant under the scattering. The phase space of armchair nanoribbon which includes a single Dirac singularity is specified. By examining the effects of boundary perturbations on the wave function, we suggest that the existance of a strong boundary potential is inconsistent with the observation in a recent scanning tunneling microscopy. Some of the possible electron-density superstructure patterns near a step armchair edge located on top of graphite are presented. It is demonstrated that a selection rule for the G band in Raman spectroscopy can be most easily reproduced with the analytical solution.Comment: 7 pages, 4 figure

Comparison and synergy of stratospheric ozone measurements by satellite limb sounders and the ground-based microwave radiometer SOMORA

International audienceStratospheric O3 profiles obtained by the satellite limb sounders Aura/MLS, ENVISAT/MIPAS, ENVISAT/GOMOS, SAGE-II, SAGE-III, UARS/HALOE are compared to coincident O3 profiles of the ground-based microwave radiometer SOMORA in Switzerland. Data from the various measurement techniques are within 10% at altitudes below 45 km. At altitudes 45?60 km, the relative O3 differences are within a range of 50% Larger deviations at upper altitudes are attributed to larger relative measurement errors caused by lower O3 concentrations. The spatiotemporal characteristics of the O3 differences (satellite ? ground station) are investigated by analyzing about 5000 coincident profile pairs of Aura/MLS (retrieval version 1.5) and SOMORA. The probability density function of the O3 differences is represented by a Gaussian normal distribution (except for profile pairs around the stratopause at noon). The dependence of the O3 differences on the horizontal distance between the sounding volumes of Aura/MLS and SOMORA is derived. While the mean bias (Aura/MLS ? SOMORA) is constant with increasing horizontal distance (up to 800 km), the standard deviation of the O3 differences increases from around 8 to 12% in the mid-stratosphere. Geographical maps yield azimuthal dependences and horizontal gradients of the O3 difference field around the SOMORA ground station. Coherent oscillations of O3 are present in the time series of Aura/MLS and SOMORA (e.g., due to traveling planetary waves). Ground- and space-based measurements often complement one another. We introduce the double differencing technique which allows both the cross-validation of two satellites by means of a ground station and the cross-validation of distant ground stations by means of one satellite. Temporal atmospheric noise in the geographical ozone map over Payerne is significantly reduced by combination of the data from SOMORA and Aura/MLS. These analyses illustrate the synergy between ground-based and space-based measurements

Chiral Biphenyldicarboxylic Acid Networks Stabilized by Hydrogen Bonding

The self-assembly of 4,4′-biphenyldicarboxylic acid on a Au(111) surface is investigated by means of in situ ultra-high-vacuum scanning tunneling microscopy. Three types of open networks with increasing interpore distance are observed. Experiments and theoretical calculations reveal that the two-dimensional porous networks are stabilized by various types of hydrogen bonds between carboxyl groups and by van der Waals interactions. Cyclic tetrameric and half-cyclic trimeric hydrogen-bonding motifs are shown to induce chirality in the open networks

On-surface activation of benzylic C-H bonds for the synthesis of pentagon-fused graphene nanoribbons

Graphene nanoribbons (GNRs) have potential for applications in electronic devices. A key issue, thereby, is the fine-tuning of their electronic characteristics, which can be achieved through subtle structural modifications. These are not limited to the conventional armchair, zigzag, and cove edges, but also possible through incorporation of non-hexagonal rings. On-surface synthesis enables the fabrication and visualization of GNRs with atomically precise chemical structures, but strategies for the incorporation of non-hexagonal rings have been underexplored. Herein, we describe the on-surface synthesis of armchair-edged GNRs with incorporated five-membered rings through the C-H activation and cyclization of benzylic methyl groups. Ortho-Tolyl-substituted dibromobianthryl was employed as the precursor monomer, and visualization of the resulting structures after annealing at 300 °C on a gold surface by high-resolution noncontact atomic force microscopy clearly revealed the formation of methylene-bridged pentagons at the GNR edges. These persisted after annealing at 340 °C, along with a few fully conjugated pentagons having singly-hydrogenated apexes. The benzylic methyl groups could also migrate or cleave-off, resulting in defects lacking the five-membered rings. Moreover, unexpected and unique structural rearrangements, including the formation of embedded heptagons, were observed. Despite the coexistence of different reaction pathways that hamper selective synthesis of a uniform structure, our results provide novel insights into on-surface reactions en route to functional, non-benzenoid carbon nanomaterials

Neurologic complications of sickle cell disease in Africa A systematic review and meta-analysis

To summarize prevalence data on the neurologic complications of sickle cell disease (SCD) in Africa