An assessment of the use of antimisting fuel in turbofan engines

An evaluation was made on the effects of using antimisting kerosene (AMK) on the performance of the components from the fuel system and the combustor of current in service JT8D aircraft engines. The objectives were to identify if there were any problems associated with using antimisting kerosene and to determine the extent of shearing or degradation required to allow the engine components to achieve satisfactory operation. The program consisted of a literature survey and a test program which evaluated the antimisting kerosene fuel in laboratory and bench component testing, and assessed the performance of the combustor in a high pressure facility and in an altitude relight/cold ignition facility

Enrichment of innate lymphoid cell populations in gingival tissue

Innate lymphoid cells (ILCs) are a population of lymphocytes that act as the first line of immunologic defense at mucosal surfaces. The ILC family in the skin, lungs, and gastrointestinal tissues has been investigated, and there are reports of individual subsets of ILCs in the oral tissues. We sought to investigate the whole ILC population (group 1, 2, and 3 subsets) in the murine gingivae and the lymph nodes draining the oral cavity. We show that ILCs made up a greater proportion of the whole CD45+ lymphocyte population in the murine gingivae (0.356% ± 0.039%) as compared with the proportion of ILCs in the draining lymph nodes (0.158% ± 0.005%). Cytokine profiling of the ILC populations demonstrated different proportions of ILC subsets in the murine gingivae versus the regional lymph nodes. The majority of ILCs in the draining lymph nodes expressed IL-5, whereas there were equal proportions of IFN-γ- and IL-5 expressing ILCs in the oral mucosa. The percentage of IL-17+ ILCs was comparable between the murine gingivae and the oral draining lymph nodes. These data suggest an enrichment of ILCs in the murine gingivae, and these ILCs reflect a cytokine profile discrepant to that of the local draining lymph nodes. These studies indicate diversity and enrichment of ILCs at the oral mucosal surface. The function of ILCs in the oral cavity remains to be determined; here, we provide a premise of ILC populations that merits future consideration in investigations of mouse models and human tissues

Biomateriales

Es bien sabido que la Ciencia y la Tecnología de los Biomateriales es muy reciente. Tanto es así que todavía no existe una sòlida normativa relativa a la evaluación de la biocompatibilidad de los biomateriales. El presente trabajo pretende introducir el concepto de Biomaterial, así como describir sus tipos y sus aplicaciones médicas y quirúrgicas. El tema de los Biomateriales es un área interdisciplinaria donde deben intervenir tanto ingenieros mecánicos y de materiales, como diseñadores y biólogos celulares, así como médicos y cirujanos. La característica que debe cumplir todo biomaterial es ser biocompatible. En consecuencia se analiza de biocompatibilidad y las técnicas habituales para evaluarla

Biomaterials

És ben sabut que la Ciència i Tecnologia dels Biomaterials és una disciplina de creació molt recent. Fins al punt que encara no existeix una normativa sòlida relativa a l'avaluació de la biocomptabilitat dels biomaterials. El treball que presentem pretén introduir el concepte de biomaterial i descriure'n els tipus i les aplicacions mèdiques i quirúrgiques. Els biomaterials conformen una àrea interdisciplinària en què han d'intervenir tant enginyers mecànics i de materials com dissenyadors, biòlegs cel.lulars, metges i cirurgians. La característica que ha de complir qualsevol biomaterial és ser biocompatible

Control of microenvironmental cues with a smart biomaterial composite promotes endothelial progenitor cell angiogenesis

Abstract: Smart biomaterials play a key role when aiming at successful tissue repair by means of regenerative medicine approaches, and are expected to contain chemical as well as mechanical cues that will guide the regenerative process. Recent advances in the understanding of stem cell biology and mechanosensing have shed new light onto the importance of the local microenvironment in determining cell fate. Herein we report the biological properties of a bioactive, biodegradable calcium phosphate glass/polylactic acid composite biomaterial that promotes bone marrow-derived endothelial progenitor cell (EPC) mobilisation, differentiation and angiogenesis through the creation of a controlled bone healing-like microenvironment. The angiogenic response is triggered by biochemical and mechanical cues provided by the composite, which activate two synergistic cell signalling pathways: a biochemical one mediated by the calcium-sensing receptor and a mechanosensitive one regulated by non-muscle myosin II contraction. Together, these signals promote a synergistic response by activating EPCs-mediated VEGF and VEGFR-2 synthesis, which in turn promote progenitor cell homing, differentiation and tubulogenesis. These findings highlight the importance of controlling microenvironmental cues for stem/progenitor cell tissue engineering and offer exciting new therapeutical opportunities for biomaterial-based vascularisation approaches and clinical applications

Fast-degrading PLA/ORMOGLASS fibrous composite scaffold leads to a calcium-rich angiogenic environment

The success of scaffold implantation in acellular tissue engineering approaches relies on the ability of the material to interact properly with the biological environment. This behavior mainly depends on the design of the graft surface and, more precisely, on its capacity to biodegrade in a well-defined manner (nature of ions released, surface-to-volume ratio, dissolution profile of this release, rate of material resorption, and preservation of mechanical properties). The assessment of the biological behavior of temporary templates is therefore very important in tissue engineering, especially for composites, which usually exhibit complicated degradation behavior. Here, blended polylactic acid (PLA) calcium phosphate ORMOGLASS (organically modified glass) nanofibrous mats have been incubated up to 4 weeks in physiological simulated conditions, and their morphological, topographical, and chemical changes have been investigated. The results showed that a significant loss of inorganic phase occurred at the beginning of the immersion and the ORMOGLASS maintained a stable composition afterward throughout the degradation period. As a whole, the nanostructured scaffolds underwent fast and heterogeneous degradation. This study reveals that an angiogenic calcium-rich environment can be achieved through fast-degrading ORMOGLASS/PLA blended fibers, which seems to be an excellent alternative for guided bone regeneration

Cartilage Appearance Using an Environmental Scanning Electron Microscope.

Because of technical principles, samples to be observed with electron microscopy need to be fixed in a chemical process and exposed to vacuum conditions that can produce some changes in the morphology of the specimen. The aim of this work was to obtain high-resolution images of the fresh articular cartilage surface with an environmental scanning electron microscope (ESEM), which is an instrument that permits examination of biological specimens without fixation methods in a 10 Torr chamber pressure, thus minimizing the risk of creating artifacts in the structure. Samples from weight-bearing areas of femoral condyles of New Zealand white rabbits were collected and photographed using an ESEM. Images were analyzed using a categorization based in the Jurvelin classification system modified by Hong and Henderson. Appearance of the observed elevations and depressions as described in the classification were observed, but no fractures or splits of cartilage surface, thought to be artifacts, were detected. The ESEM is a useful tool to obtain images of fresh articular cartilage surface appearance without either employing fixation methods or exposing the specimen to extreme vacuum conditions, reducing the risk of introducing artifacts within the specimen. For all these reasons it could become a useful tool for quality control of the preservation process of osteochondral allografting in a bank of musculoskeletal tissues

Evaluación de la rigidez de diferentes fijadores externos

Se ha estudiado la rigidez a compresión, flexión en 3 puntos y torsión de fijadores del tipo Orthofix, Wagner y Hoffmann doble marco con diferentes distancias del clavo al foco de fractura. Se han comparado los resultados que permitirán realizar en la práctica clínica montajes con las carcaterísticas de regidez deseables.Peer Reviewe

In vivo performance of novel soybean/gelatin-based bioactive and injectable hydroxyapatite foams

Major limitations of calcium phosphate cements (CPCs) are their relatively slow degradation rate and the lack of macropores allowing the ingrowth of bone tissue. The development of self-setting cement foams has been proposed as a suitable strategy to overcome these limitations. In previous work we developed a gelatine-based hydroxyapatite foam (G-foam), which exhibited good injectability and cohesion, interconnected porosity and good biocompatibility in vitro. In the present study we evaluated the in vivo performance of the G-foam. Furthermore, we investigated whether enrichment of the foam with soybean extract (SG-foam) increased its bioactivity. G-foam, SG-foam and non-foamed CPC were implanted in a critical-size bone defect in the distal femoral condyle of New Zealand white rabbits. Bone formation and degradation of the materials were investigated after 4, 12 and 20 weeks using histological and biomechanical methods. The foams maintained their macroporosity after injection and setting in vivo. Compared to non-foamed CPC, cellular degradation of the foams was considerably increased and accompanied by new bone formation. The additional functionalization with soybean extract in the SG-foam slightly reduced the degradation rate and positively influenced bone formation in the defect. Furthermore, both foams exhibited excellent biocompatibility, implying that these novel materials may be promising for clinical application in non-loaded bone defects. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd.Peer ReviewedPostprint (published version

Validación del empleo de aleaciones superelásticas en distracción mandibular

Peer Reviewe