48 research outputs found
Spatially selective reversible charge carrier density tuning in WS_2 monolayers via photochlorination
Chlorine-doped tungsten disulfide monolayer (1L-WS_2) with tunable charge carrier concentration has been realized by pulsed laser irradiation of the atomically thin lattice in a precursor gas atmosphere. This process gives rise to a systematic shift of the neutral exciton peak towards lower energies, indicating reduction of the crystal's electron density. The capability to progressively tune the carrier density upon variation of the exposure time is demonstrated; this indicates that the Fermi level shift is directly correlated to the respective electron density modulation due to the chlorine species. Notably, this electron withdrawing process enabled the determination of the trion binding energy of the intrinsic crystal, found to be as low as 20 meV, in accordance to theoretical predictions. At the same time, it is found that the effect can be reversed upon continuous wave laser scanning of the monolayer in air. Scanning auger microscopy (SAM) and x-ray photoelectron spectroscopy (XPS) are used to link the actual charge carrier doping to the different chlorine configurations in the monolayer lattice. The spectroscopic analyses, complemented by density functional theory calculations, reveal that chlorine physisorption is responsible for the carrier density modulation induced by the pulsed laser photochemical reaction process. Such bidirectional control of the Fermi level, coupled with the capability offered by lasers to process at pre-selected locations, can be advantageously used for spatially resolved doping modulation in 1L-WS_2 with micrometric resolution. This method can also be extended for the controllable doping of other TMD monolayers
Biaxial strain tuning of exciton energy and polarization in monolayer WS2
We perform micro-photoluminescence and Raman experiments to examine the
impact of biaxial tensile strain on the optical properties of WS2 monolayers. A
strong shift on the order of -130 meV per % of strain is observed in the
neutral exciton emission at room temperature. Under near-resonant excitation we
measure a monotonic decrease in the circular polarization degree under applied
strain. We experimentally separate the effect of the strain-induced energy
detuning and evaluate the pure effect coming from biaxial strain. The analysis
shows that the suppression of the circular polarization degree under biaxial
strain is related to an interplay of energy and polarization relaxation
channels as well as to variations in the exciton oscillator strength affecting
the long-range exchange interaction.Comment: 29 pages, 11 figure
Graphene-black phosphorus printed photodetectors
Layered materials (LMs) produced by liquid phase exfoliation (LPE) can be used as building blocks for optoelectronic applications. However, when compared with mechanically exfoliated flakes, or films prepared by chemical vapor deposition (CVD), LPE-based printed optoelectronic devices are limited by mobility, defects and trap states. Here, we present a scalable fabrication technique combining CVD with LPE LMs to overcome such limitations. We use black phosphorus inks, inkjet-printed on graphene on Si/SiO2, patterned by inkjet printing based lithography, and source and drain electrodes printed with an Ag ink, to prepare photodetectors (PDs). These have an external responsivity (R ext)∼337 A W−1 at 488 nm, and operate from visible (∼488 nm) to short-wave infrared (∼2.7 µm, R ext ∼ 48 mA W−1). We also use this approach to fabricate flexible PDs on polyester fabric, one of the most common used in textiles, achieving R ext ∼ 6 mA W−1 at 488 nm for an operating voltage of 1 V. Thus, our combination of scalable CVD and LPE techniques via inkjet printing is promising for wearable and flexible applications
Graphene-perovskite fibre photodetectors
The integration of optoelectronic devices, such as transistors and
photodetectors (PDs), into wearables and textiles is of great interest for
applications such as healthcare and physiological monitoring. These require
flexible/wearable systems adaptable to body motions, thus materials conformable
to non-planar surfaces, and able to maintain performance under mechanical
distortions. Here, we prepare fibre PDs combining rolled graphene layers and
photoactive perovskites. Conductive fibres (500/cm) are made by
rolling single layer graphene (SLG) around silica fibres, followed by
deposition of a dielectric layer (AlO and parylene C), another
rolled SLG as channel, and perovskite as photoactive component. The resulting
gate-tunable PDs have response time5ms, with an external
responsivity22kA/W at 488nm for 1V bias. The external responsivity is two
orders of magnitude higher and the response time one order of magnitude faster
than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up
to80\% photocurrent is maintained. Washability tests show72\% of
initial photocurrent after 30 cycles, promising for wearable applications
Gradient induced liquid motion on laser structured black Si surfaces
This letter reports on the femtosecond laser fabrication of gradient-wettability micro/nano-patterns on Si surfaces. The dynamics of directional droplet spreading on the surface tension gradients developed is systematically investigated and discussed. It is shown that microdroplets on the patterned surfaces spread at a maximum speed of 505-mm/s, which is the highest velocity demonstrated so far for liquid spreading on a surface tension gradient in ambient conditions. The application of the proposed laser patterning technique for the precise fabrication of surface tension gradients for open microfluidic systems, liquid management in fuel cells, and drug delivery is envisaged
Intense femtosecond photoexcitation of bulk and monolayer MoS<inf>2</inf>
The effect of femtosecond laser irradiation on bulk and single-layer MoS2 on silicon oxide is studied. Optical, field emission scanning electron microscopy and Raman microscopy were used to quantify the damage. The intensity of A1g and E2g1 vibrational modes was recorded as a function of the number of irradiation pulses. The observed behavior was attributed to laser-induced bond breaking and subsequent atoms removal due to electronic excitations. The single-pulse optical damage threshold was determined for the monolayer and bulk under 800 nm and 1030 nm pulsed laser irradiation, and the role of two-photon versus one photon absorption effects is discussed. © 2014 AIP Publishing LLC