7 research outputs found
Recommended from our members
Evaluation of ingredients for the development of new insensitive munitions.
Several ingredients being considered by the U.S. Army for the development of new insensitive munitions have been examined. One set of ingredients consists of 2,4-dinitrophenylhydrazine (DNPH) and hexahydro-1,3,5-trinitro-s-triazine (RDX). In this set, the decomposition of the mixture was examined to determine whether adding DNPH to RDX would generate a sufficient quantity of gas to rupture the case of a munition prior to the onset of the rapid reaction of RDX, thus mitigating the violence of reaction. The second set of ingredients consists of three different reduced sensitivity RDX (RS-RDX) powders manufactured by SNPE and Dyno-Nobel. In this set, the objective was to determine properties of RS-RDX powders that may distinguish them from normal RDX powder and may account for their reduced shock sensitivity. The decomposition reactions and sublimation properties of these materials were examined using two unique instruments: the simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) instrument and the Fourier Transform ion cyclotron resonance (FTICR) mass spectrometry instrument. These instruments provide the capability to examine the details of decomposition reactions in energetic materials. DNPH does not appear to be a good candidate to mitigate the violence of the RDX reaction in a munition. DNPH decomposes between 170 C and 180 C. When mixed with RDX it decomposes between 155 C and 170 C. It decomposes to form 1,3-dintrobenzene (DNB), ammonia, water and nitrogen. Of these compounds only nitrogen and ammonia are capable of generating high pressures within a munition. When DNPH is mixed with RDX, the DNB formed in the decomposition of DNPH interacts with RDX on the surface of the RDX powder leading to a higher rate of formation of CH2O and N2O. The CH2O is consumed by reaction with DNPH to form 2-methylene-1-(2,4-dintrophenyl)hydrazine. As a result, DNPH does not generate a large quantity of gas that will lead to rupture of a munition case. Another compound to consider as an additive is 2-oxo-1,3,5-trinitro-1,3,5-triazacyclohexane (K-6), which generates more gas in the required temperature range. Examination of several different RS-RDX materials has shown that their sublimation rates and decomposition behavior differ from Holston grade RDX. The results suggest that insensitive RDX materials from both SNPE and Dyno-Nobel may have a shell-like structure of RDX on the surface of the particles that is less stable and more reactive than the material in the core of the particles. The origin of this shell-like RDX structure is uncertain, but may be due to some aspect of the manufacturing process. It is possible that this less stable RDX on the surface of the particles may be more fluid than the interior of the particles, allowing more slip between the surface of the particles under impact or shock. This may play a role in the reduced shock sensitivity of the insensitive RDX materials. The results of over 50 experiments with DNPH, mixtures of DNPH and RDX and insensitive RDX are presented. The results characterize the decomposition behavior of each of these materials
A Direct Sampling Mass Spectrometer Investigation of Oxidation Mechanisms for Acetic Acid in Supercritical Water
Recommended from our members
Final LDRD report : development of sample preparation methods for ChIPMA-based imaging mass spectrometry of tissue samples.
The objective of this short-term LDRD project was to acquire the tools needed to use our chemical imaging precision mass analyzer (ChIPMA) instrument to analyze tissue samples. This effort was an outgrowth of discussions with oncologists on the need to find the cellular origin of signals in mass spectra of serum samples, which provide biomarkers for ovarian cancer. The ultimate goal would be to collect chemical images of biopsy samples allowing the chemical images of diseased and nondiseased sections of a sample to be compared. The equipment needed to prepare tissue samples have been acquired and built. This equipment includes an cyro-ultramicrotome for preparing thin sections of samples and a coating unit. The coating unit uses an electrospray system to deposit small droplets of a UV-photo absorbing compound on the surface of the tissue samples. Both units are operational. The tissue sample must be coated with the organic compound to enable matrix assisted laser desorption/ionization (MALDI) and matrix enhanced secondary ion mass spectrometry (ME-SIMS) measurements with the ChIPMA instrument Initial plans to test the sample preparation using human tissue samples required development of administrative procedures beyond the scope of this LDRD. Hence, it was decided to make two types of measurements: (1) Testing the spatial resolution of ME-SIMS by preparing a substrate coated with a mixture of an organic matrix and a bio standard and etching a defined pattern in the coating using a liquid metal ion beam, and (2) preparing and imaging C. elegans worms. Difficulties arose in sectioning the C. elegans for analysis and funds and time to overcome these difficulties were not available in this project. The facilities are now available for preparing biological samples for analysis with the ChIPMA instrument. Some further investment of time and resources in sample preparation should make this a useful tool for chemical imaging applications
Synthesis, structural characterization, and thermal decomposition study of Mg(H2O)6B10H10·4H2O
Compound 1 (Mg(H2O)6B10H10 3 4H2O) was synthesized and characterized using NMR, IR, XRD, and elemental analysis. Its thermal decomposition behavior was studied using Simultaneous Thermogravimetric Modulated Beam Mass Spectrometry (STMBMS), TGA, DSC, IR, and 11B NMR. The crystal structure of 1 reveals multiple dihydrogen and hydrogen bonding interactions that form a 3D extended structure. A reaction network characterizing the thermal decomposition of 1 and its secondary products over a temperature range from 20 to 1000 _C has been developed. Thermal decomposition of 1 is primarily controlled by two competing branches in the reaction network, where coordinated water evolves as either H2O (dehydration) or H2 (dehydrogenation). The extent of reaction to form H2 depends on the fraction of the coordinated water remaining in the sample when its temperature is between 160 and 225 _C. The evolution of coordinated water is reversible and controlled by dissociative sublimation. For the release of coordinated water between 160 and 215 _C, the vapor pressure of water is given by Loge P (Torr) = 30.4561 _ 12425.2/T (K) and ΔHs = 103.3(0.3 kJ/mol. The nature of the condensed phase secondary product remaining after all coordinated water is removed by either dehydration and/or dehydrogenation depends strongly on the extent of reaction to form Mg(OH)xB10H10_x. Results of STMBMS experiments where x varies from 0.2 to ∼4 are used to develop the reaction network that characterizes the thermal decomposition process. Heating of 1 at 205 _C resulted in the formation of water-soluble Mg(OH)x(H2O)2_xB10H10_x, while prolonged heating of 1 at 270 _C and heating up to 1000 _C led to decompositio
The structural characterization of (NH4)2B10H10 and thermal decomposition studies of (NH4)2B10H10 and (NH4)2B12H12
The structure of (NH4)2B10H10 (1) was determined through powder XRD analysis. The thermal decomposition of 1 and (NH4)2B12H12 (2) was examined between 20 and 1000oC using STMBMS methods. Between 200 and 400oC a mixture of NH3 and H2 evolves from both compounds; above 400oC only H2 evolves. The dihydrogen bonding interaction in 1 is much stronger than that in 2. The stronger dihydrogen bond in 1 resulted in a significant reduction by up to 60oC, but with a corresponding 25% decrease in the yield of H2 in the lower temperature region and a doubling of the yield of NH3. The decomposition of 1 follows a lower temperature exothermic reaction pathway that yields substantially more NH3 than the higher temperature endothermic pathway of 2. Heating of 1 at 250oC resulted in partial conversion of B10H102 to B12H122 Both 1 and 2 form an insoluble polymeric material after decomposition. The elements of the reaction network that control the release of H2 from the B10H102 can be altered by conducting the experiment under conditions in whichpressures of NH3 and H2 are either near, or away from, their equilibrium values