Pool temperature stratification analysis in CIRCE-ICE facility with RELAP5-3D© model and comparison with experimental tests

In the frame of heavy liquid metal (HLM) technology development, CIRCE pool facility at ENEA/Brasimone Research Center was updated by installing ICE (Integral Circulation Experiments) test section which simulates the thermal behavior of a primary system in a HLM cooled pool reactor. The experimental campaign led to the characterization of mixed convection and thermal stratification in a HLM pool in safety relevant conditions and to the distribution of experimental data for the validation of CFD and system codes. For this purpose, several thermocouples were installed into the pool using 4 vertical supports in different circumferential position for a total of 119 thermocouples [1][2]. The aim of this work is to investigate the capability of the system code RELAP5-3D (c) to simulate mixed convection and thermal stratification phenomena in a HLM pool in steady state conditions by comparing code results with experimental data. The pool has been simulated by a 3D component divided into 1728 volumes, 119 of which are centered in the exact position of the thermocouples. Three dimensional model of the pool is completed with a mono-dimensional nodalization of the primary main flow path. The results obtained by code simulations are compared with a steady state condition carried out in the experimental campaign. Results of axial, radial and azimuthal temperature profile into the pool are in agreement with the available experimental data Furthermore the code is able to well simulate operating conditions into the main flow path of the test section

Pre-test analysis of protected loss of primary pump transients in CIRCE-HERO facility

In the frame of LEADER project (Lead-cooled European Advanced Demonstration Reactor), a new configuration of the steam generator for ALFRED (Advanced Lead Fast Reactor European Demonstrator) was proposed. The new concept is a super-heated steam generator, double wall bayonet tube type with leakage monitoring [1]. In order to support the new steam generator concept, in the framework of Horizon 2020 SESAME project (thermal hydraulics Simulations and Experiments for the Safety Assessment of MEtal cooled reactors), the ENEA CIRCE pool facility will be refurbished to host the HERO (Heavy liquid mEtal pRessurized water cOoled tubes) test section to investigate a bundle of seven full scale bayonet tubes in ALFRED-like thermal hydraulics conditions. The aim of this work is to verify thermofluid dynamic performance of HERO during the transition from nominal to natural circulation condition. The simulations have been performed with RELAP5-3D© by using the validated geometrical model of the previous CIRCE-ICE test section [2], in which the preceding heat exchanger has been replaced by the new bayonet bundle model. Several calculations have been carried out to identify thermal hydraulics performance in different steady state conditions. The previous calculations represent the starting points of transient tests aimed at investigating the operation in natural circulation. The transient tests consist of the protected loss of primary pump, obtained by reducing feed-water mass flow to simulate the activation of DHR (Decay Heat Removal) system, and of the loss of DHR function in hot conditions, where feed-water mass flow rate is absent. According to simulations, in nominal conditions, HERO bayonet bundle offers excellent thermal hydraulic behavior and, moreover, it allows the operation in natural circulation

Post-test simulation of a PLOFA transient test in the CIRCE-HERO facility

CIRCE is a lead–bismuth eutectic alloy (LBE) pool facility aimed to simulate the primary system of a heavy liquid metal (HLM) cooled pool-type fast reactor. The experimental facility was implemented with a new test section, called HERO (Heavy liquid mEtal pRessurized water cOoled tubes), which consists of a steam generator composed of seven double-wall bayonet tubes (DWBT) with an active length of six meters. The experimental campaign aims to investigate HERO behavior, which is representative of the tubes that will compose ALFRED SG. In the framework of the Horizon 2020 SESAME project, a transient test was selected for the realization of a validation benchmark. The test consists of a protected loss of flow accident (PLOFA) simulating the shutdown of primary pumps, the reactor scram and the activation of the DHR system. A RELAP5-3D© nodalization scheme was developed in the pre-test phase at DIAEE of “Sapienza” University of Rome, providing useful information to the experimentalists. The model consisted to a mono-dimensional scheme of the primary flow path and the SG secondary side, and a multi-dimensional component simulating the large LBE pool. The analysis of experimental data, provided by ENEA, has suggested to improve the thermal–hydraulic model with a more detailed nodalization scheme of the secondary loop, looking to reproduce the asymmetries observed on the DWBTs operation. The paper summarizes the post-test activity performed in the frame of the H2020 SESAME project as a contribution of the benchmark activity, highlighting a global agreement between simulations and experiment for all the primary circuit physical quantities monitored. Then, the attention is focused on the secondary system operation, where uncertainties related to the boundary conditions affect the computational results

Third-order theory for the bending analysis of laminated thin and thick plates including the strain gradient effect

The aim of the paper is the development of a third-order theory for laminated composite plates that is able to accurately investigate their bending behavior in terms of displacements and stresses. The starting point is given by the corresponding Reddy’s Third-order Shear Deformation Theory (TSDT). This model is then generalized to consider simultaneously the Classical Laminated Plate Theory (CLPT), as well as the First-order Shear Deformation Theory (FSDT). The constitutive laws are modified according to the principles of the nonlocal strain gradient approach. The fundamental equations are solved analytically by means of the Navier methodology taking into account cross-ply and angle-ply lamination schemes. The numerical applications are presented to highlight the nonlocal effects on static behavior

A Continuum Model for Circular Graphene Membranes Under Uniform Lateral Pressure

Despite the numerous applications of pressurized graphene membranes in new technologies, there is still a lack of accurate mechanical models. In this work we develop a continuum model for circular graphene membranes subjected to uniform lateral pressure. We adopt a semi-inverse method by defining a simplified kinematics of deformation and we describe the material behavior with a stored energy function that takes into account both nonlinearity and anisotropy of graphene. An expression of the applied pressure as a function of the deflection of the membrane is obtained from an approximate solution of the equilibrium. The simplifying hypotheses of the analytical model are verified by a finite element (FE) analysis in nonlinear elasticity. In addition, a numerical solution of the differential equilibrium equations of the exact theory is presented. The pressure-deflection response from FE and numerical solutions agree well with the prediction of the analytical formula, demonstrating its accuracy. The analytical solution is then employed for the response of a two-layered composite membrane made of graphene deposited onto a soft substrate. This application is of great interest since new nanotechnologies make use of layered nanocomposites. Differently from our entirely nonlinear approach, most continuum models in the literature are based on the assumption of linear elastic material, which is suitable only when deformations are small. The present work gives a comprehensive description of the mechanics of pressurized graphene membranes

Effect of compressibility on the mechanics of hyperelastic membranes

Elastic membranes are usually studied assuming material incompressibility. However, in several applications they are made of compressible materials such as polymeric foams, hydrogels, and certain kinds of elastomers. Only a few works attempted to incorporate volume changes into membrane problems, but with significant limitations. The models proposed were designed for nearly incompressible materials and lacked a foundation in experimental data, leading to results of limited value. In this work, we investigate the effect of compressibility in membrane problems adopting a consistent model based on the real response of materials to large volume changes. We consider three benchmark problems of nonlinear elasticity: (i) inflation of a circular flat membrane; (ii) inflation of a thin-walled cylindrical tube; (iii) inflation of a thin-walled spherical balloon. Four types of materials divided by increasing degree of compressibility are studied. The results indicate that volumetric deformations have a significant impact on both the limit pressure and the deformed shape. The proposed solutions represent benchmarks for developing new applications of compressible membranes made of polymeric foams and hydrogels, playing an increasingly important role in engineering technologies

Steatosis, steatohepatitis and cancer immunotherapy: An intricate story

Immune checkpoint inhibitors represent one of the most significant recent advances in clinical oncology, since they dramatically improved the prognosis of deadly cancers such as melanomas and lung cancer. Treatment with these drugs may be complicated by the occurrence of clinically-relevant adverse drug reactions, most of which are immune-mediated, such as pneumonitis, colitis, endocrinopathies, nephritis, Stevens Johnson syndrome and toxic epidermal necrolysis. Drug-induced steatosis and steatohepatitis are not included among the typical forms of cancer immunotherapy-induced liver toxicity, which, instead, usually occurs as a panlobular hepatitis with prominent lymphocytic infiltrates. Nonetheless, non-alcoholic fatty liver disease is a risk factor for immunotherapy-induced hepatitis, and steatosis and steatohepatitis are frequently observed in this condition. In the present review we discuss how these pathology findings could be explained in the context of current models suggesting immune-mediated pathogenesis for steatohepatitis. We also review evidence suggesting that in patients with hepatocellular carcinoma, the presence of steatosis or steatohepatitis could predict a poor therapeutic response to these agents. How these findings could fit with immune-mediated mechanisms of these liver diseases will also be discussed

Findings from studies are congruent with obesity having a viral origin, but what about obesity-related nafld?

Infection has recently started receiving greater attention as an unusual causative/inducing factor of obesity. Indeed, the biological plausibility of infectobesity includes direct roles of some viruses to reprogram host metabolism toward a more lipogenic and adipogenic status. Furthermore, the probability that humans may exchange microbiota components (virome/virobiota) points out that the altered response of IFN and other cytokines, which surfaces as a central mechanism for adipogenesis and obesity-associated immune suppression, is due to the fact that gut microbiota uphold intrinsic IFN signaling. Last but not least, the adaptation of both host immune and metabolic system under persistent viral infections play a central role in these phenomena. We hereby discuss the possible link between adenovirus and obesity-related nonalcoholic fatty liver disease (NAFLD). The mechanisms of adenovirus-36 (Ad-36) involvement in hepatic steatosis/NAFLD consist in reducing leptin gene expression and insulin sensitivity, augmenting glucose uptake, activating the lipogenic and pro-inflammatory pathways in adipose tissue, and increasing the level of macrophage chemoattractant protein-1, all of these ultimately leading to chronic inflammation and altered lipid metabolism. Moreover, by reducing leptin expression and secretion Ad-36 may have in turn an obesogenic effect through increased food intake or decreased energy expenditure via altered fat metabolism. Finally, Ad-36 is involved in upregulation of cAMP, phosphatidylinositol 3-kinase, and p38 signaling pathways, downregulation of Wnt10b expression, increased expression of CCAAT/enhancer binding protein-beta, and peroxisome proliferator-activated receptor gamma 2 with consequential lipid accumulation