The survey on aquaculture capacity of Ghar-Khatlo dam reservoir in Zanjan province

Qhar-khetlu dam reservoir is in the central part of Ijrud city of Zanjan province with a reservoir volume of 500000 and a water volume of 900000 cubic meters, covering an area of 6 hectares and containing 3500 hectares of the watershed in order to control seasonal floods, drinking water in the village, strengthening the aquifers of the area and As a water supply in the dry seasons, 120 hectares of agricultural land was planted for irrigation.Study of this water source with the aim of measuring biological and non-biological factors, determination of aquaculture production and Fish release capacity and fishing capacity for optimal use of fishery management in Zanjan province was done in 2006.The results of hydrochemical analysis of the water of Qharkhetlu dam reservoir showed that the minimum and maximum temperature of water ranged from 4.5 to 26 ° C, the pH of the water was 4.7 to 8.8, the dissolved oxygen was 7.7 to 12.2 mg, the total water hardness fluctuation was 154 194 mg/L and electrical conductivity of 272 to 390 micrometers per square centimeter, the water transparency was 25 to 380 centimeters.In this study, six phytoplankton classes with 31 genera and 3 classes of zooplankton with 14 genera were obtained. The abundance of phytoplanktons was counted from 150,000 to 206,000 per liter, and the average chlorophyll a, 1.10 micrograms, was estimated. The frequency of zooplanktons were 32 to 132 per liter, as well as the mean of 544 per square meter of macrobenthos.By comparing of the physical, chemical and biological factors and also the results of previous studies of this water source, the conditions for the introduction of warm water and cold water fishes including silver carp, big head carp, rainbow trout out and native fishes including species of Barbus and Capoeta genera are suitable. Estimation of Qhar-khetlu dam reservoir production is 80 kg/ha and its production capacity is 484 kg per year

Original article title: "Comparison of therapeutic efficacy of topical corticosteroid and oral zinc sulfate-topical corticosteroid combination in the treatment of vitiligo patients: a clinical trial"

<p>Abstract</p> <p>Background</p> <p>Vitiligo is the most prevalent pigmentary disorder which occurs worldwide, with an incidence rate between 0.1-4 percent. It is anticipated that the discovery of biological pathways of vitiligo pathogenesis will provide novel therapeutic and prophylactic targets for future approaches to the treatment and prevention of vitiligo. The purposes of this study were evaluating the efficacy of supplemental zinc on the treatment of vitiligo.</p> <p>Methods</p> <p>This randomized clinical trial was conducted for a period of one year. Thirty five patients among 86 participants were eligible to entrance to the study. The patients in two equal randomized groups took topical corticosteroid and combination of oral zinc sulfate-topical corticosteroid.</p> <p>Results</p> <p>The mean of responses in the corticosteroid group and the zinc sulfate-corticosteroid combination group were 21.43% and 24.7%, respectively.</p> <p>Conclusion</p> <p>Although, the response to corticosteroid plus zinc sulfate was more than corticosteroid, there was no statistically significant difference between them. It appeared that more robust long-term randomized controlled trials on more patients, maybe with higher doses of zinc sulfate, are needed to fully establish the efficacy of oral zinc in management of vitiligo.</p> <p>Trial Registration</p> <p>chiCTRTRC10000930</p

Study of Golabar dam reservoir in Zanjan province (Zanjan Province)

The limnological study of the Golabar dam showed that in the Glabar dam inspite of bing its early establishment due to high nutrient and organic matter is located in eutrophic stage. the pH as well as bicarbonate levels shows that buffering capacity of the lake is high and the value of inorganic and organic matter measured are not considered as limiting factor for warme and cold water aquaculture. In the plankton survey 44 species of phytoplankton and 25 species of zooplankton were identified. Cyclotella , Nitzschia, Synedra and Trachelomona from phytoplankton and Polyarthera , Keratella , Filinia , Pompholyx from zooplankton were the dominant spicies.the Bacillariophyta from phytoplankton with 76.5 percent and Rotatoria zooplankton to with 76.2 percent considered the highest abundant . The average frequency of phytoplankton and zooplankton were 5*106 and 723 individual per litter. The Shironomide and Tobificide were the only two bentic group were identified in reservoir wehre their mean frequced were 293.75 and 224.30 respectively. The average biomass of bentic organism were 1.44±0.97 gr/m2.In the survey 12 species of fishes were identified. The potential natural production have been estimated to be 2.8 to 15.5 kg for bentivorous fish and varied from 53 to 175 kg /hec for plankton consumer fishes .The low temperature in several months as well as ice covered of the lake surface in particular in the months of duty and Bahman are the limiting factor of either warm or cold water fish production

The Effect of Gold Nanoparticle on Electrical Impedance of Tissue on Low Frequency Ranges

Introduction: Electrical impedance of tissues on low frequencies includes useful information about functional and structural changes in tissues. This property is used in Electrical Impedance Tomography (EIT) imaging modality for the detection of lesions in tissues. Objective: The goal of this article is to study changes in electrical impedance of tissues in the presence of gold nanoparticles. Materials and Methods: Spherical gold nanoparticles with size of 20-25 nm were synthesized with Turkevich method. Size distribution and shape of nanoparticles were characterized by transmission electron microscopy (TEM). Electrical impedance of two types of phantoms (chicken fat and muscle paste tissues) was measured by 4-electrode method with and without gold nanoparticles. Results: Results demonstrate a reduction in electrical impedance of tissues in the presence of gold nanoparticles. However, this reduction is not the same for fat and muscle tissues. Reductions in resistive impedance are for fat and muscle tissues on the frequency of 1 KHz, respectively. A reduction in electrical impedance is accompanied by a rise in electrical conductance leading to increase in EIT signal. Conclusion: As signal enhancement is different for fat and muscle tissues; presence of gold nanoparticles could be used to improve EIT image contrast

Structural evaluation and mechanical properties of AZ31/SiC nano-composite produced by friction stir welding process at various welding speeds

A metal matrix composite made of AZ31 containing SiC nano-particles was successfully produced by friction stir welding (FSW), and the effect of processing parameters such as rotational and transversal speeds on the microstructure (grain size) and mechanical properties (tensile and hardness tests) were investigated. Prior to friction stir welding, nano-sized SiC particles were incorporated into the joint line and then different rotational (600, 800 and 1000¿r/min) and transversal speeds (25, 75, 125 and 175¿mm/min) were tested. The results indicated that the grain size of the matrix and SiC nano-particles are two key parameters controlling different characteristics of the developed composite. Both parameters, in turns, are dependent on the heat generated during the FSW process. The increase of rotational speed and decrease of transversal speed result in high amount of heat and homogeneous distribution of SiC nano-particles. The former leads to grain growth and decrease of strength and hardness, while the latter causes grain refinement and increases of strength and hardness. Accordingly, the heat input has opposite effects on matrix grain growth and homogeneous distribution of particles. Therefore, optimum values of rotational and transversal speeds were found (800¿r/min and 75¿mm/min) to produce the best microstructure and mechanical properties.Preprin

Structural evaluation and mechanical properties of AZ31/SiC nano-composite produced by friction stir welding process at various welding speeds

A metal matrix composite made of AZ31 containing SiC nano-particles was successfully produced by friction stir welding (FSW), and the effect of processing parameters such as rotational and transversal speeds on the microstructure (grain size) and mechanical properties (tensile and hardness tests) were investigated. Prior to friction stir welding, nano-sized SiC particles were incorporated into the joint line and then different rotational (600, 800 and 1000¿r/min) and transversal speeds (25, 75, 125 and 175¿mm/min) were tested. The results indicated that the grain size of the matrix and SiC nano-particles are two key parameters controlling different characteristics of the developed composite. Both parameters, in turns, are dependent on the heat generated during the FSW process. The increase of rotational speed and decrease of transversal speed result in high amount of heat and homogeneous distribution of SiC nano-particles. The former leads to grain growth and decrease of strength and hardness, while the latter causes grain refinement and increases of strength and hardness. Accordingly, the heat input has opposite effects on matrix grain growth and homogeneous distribution of particles. Therefore, optimum values of rotational and transversal speeds were found (800¿r/min and 75¿mm/min) to produce the best microstructure and mechanical properties