Energy-Efficient Future Wireless Networks: A Marriage between Massive MIMO and Small Cells

How would a cellular network designed for high energy efficiency look like? To answer this fundamental question, we model cellular networks using stochastic geometry and optimize the energy efficiency with respect to the density of base stations, the number of antennas and users per cell, the transmit power levels, and the pilot reuse. The highest efficiency is neither achieved by a pure small-cell approach, nor by a pure massive MIMO solution. Interestingly, it is the combination of these approaches that provides the highest energy efficiency; small cells contributes by reducing the propagation losses while massive MIMO enables multiplexing of users with controlled interference.Comment: Published at IEEE Workshop on Signal Processing Advances in Wireless Communications (SPAWC 2015), 5 pages, 5 figure

Can Hardware Distortion Correlation be Neglected When Analyzing Uplink SE in Massive MIMO?

This paper analyzes how the distortion created by hardware impairments in a multiple-antenna base station affects the uplink spectral efficiency (SE), with focus on Massive MIMO. The distortion is correlated across the antennas, but has been often approximated as uncorrelated to facilitate (tractable) SE analysis. To determine when this approximation is accurate, basic properties of the distortion correlation are first uncovered. Then, we focus on third-order non-linearities and prove analytically and numerically that the correlation can be neglected in the SE analysis when there are many users. In i.i.d. Rayleigh fading with equal signal-to-noise ratios, this occurs when having five users.Comment: 5 pages, 3 figures, IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC), 201

Spectral and Energy Efficiency of Superimposed Pilots in Uplink Massive MIMO

Next generation wireless networks aim at providing substantial improvements in spectral efficiency (SE) and energy efficiency (EE). Massive MIMO has been proved to be a viable technology to achieve these goals by spatially multiplexing several users using many base station (BS) antennas. A potential limitation of Massive MIMO in multicell systems is pilot contamination, which arises in the channel estimation process from the interference caused by reusing pilots in neighboring cells. A standard method to reduce pilot contamination, known as regular pilot (RP), is to adjust the length of pilot sequences while transmitting data and pilot symbols disjointly. An alternative method, called superimposed pilot (SP), sends a superposition of pilot and data symbols. This allows to use longer pilots which, in turn, reduces pilot contamination. We consider the uplink of a multicell Massive MIMO network using maximum ratio combining detection and compare RP and SP in terms of SE and EE. To this end, we derive rigorous closed-form achievable rates with SP under a practical random BS deployment. We prove that the reduction of pilot contamination with SP is outweighed by the additional coherent and non-coherent interference. Numerical results show that when both methods are optimized, RP achieves comparable SE and EE to SP in practical scenarios.Comment: 32 pages, 12 figures, 3 tables. Submitted in March 2017 to IEEE Transactions on Wireless Communication

Fundamental Asymptotic Behavior of (Two-User) Distributed Massive MIMO

This paper considers the uplink of a distributed Massive MIMO network where $N$ base stations (BSs), each equipped with $M$ antennas, receive data from $K=2$ users. We study the asymptotic spectral efficiency (as $M\to \infty$) with spatial correlated channels, pilot contamination, and different degrees of channel state information (CSI) and statistical knowledge at the BSs. By considering a two-user setup, we can simply derive fundamental asymptotic behaviors and provide novel insights into the structure of the optimal combining schemes. In line with [1], when global CSI is available at all BSs, the optimal minimum-mean squared error combining has an unbounded capacity as $M\to \infty$, if the global channel covariance matrices of the users are asymptotically linearly independent. This result is instrumental to derive a suboptimal combining scheme that provides unbounded capacity as $M\to \infty$ using only local CSI and global channel statistics. The latter scheme is shown to outperform a generalized matched filter scheme, which also achieves asymptotic unbounded capacity by using only local CSI and global channel statistics, but is derived following [2] on the basis of a more conservative capacity bound.Comment: 6 pages, 2 figures, to be presented at GLOBECOM 2018, Abu Dhab

Massive MIMO has Unlimited Capacity

The capacity of cellular networks can be improved by the unprecedented array gain and spatial multiplexing offered by Massive MIMO. Since its inception, the coherent interference caused by pilot contamination has been believed to create a finite capacity limit, as the number of antennas goes to infinity. In this paper, we prove that this is incorrect and an artifact from using simplistic channel models and suboptimal precoding/combining schemes. We show that with multicell MMSE precoding/combining and a tiny amount of spatial channel correlation or large-scale fading variations over the array, the capacity increases without bound as the number of antennas increases, even under pilot contamination. More precisely, the result holds when the channel covariance matrices of the contaminating users are asymptotically linearly independent, which is generally the case. If also the diagonals of the covariance matrices are linearly independent, it is sufficient to know these diagonals (and not the full covariance matrices) to achieve an unlimited asymptotic capacity.Comment: To appear in IEEE Transactions on Wireless Communications, 17 pages, 7 figure

Designing Wireless Broadband Access for Energy Efficiency: Are Small Cells the Only Answer?

The main usage of cellular networks has changed from voice to data traffic, mostly requested by static users. In this paper, we analyze how a cellular network should be designed to provide such wireless broadband access with maximal energy efficiency (EE). Using stochastic geometry and a detailed power consumption model, we optimize the density of access points (APs), number of antennas and users per AP, and transmission power for maximal EE. Small cells are of course a key technology in this direction, but the analysis shows that the EE improvement of a small-cell network saturates quickly with the AP density and then "massive MIMO" techniques can further improve the EE.Comment: Published at Small Cell and 5G Networks (SmallNets) Workshop, IEEE International Conference on Communications (ICC), 6 pages, 5 figures, 1 tabl

Deploying Dense Networks for Maximal Energy Efficiency: Small Cells Meet Massive MIMO

How would a cellular network designed for maximal energy efficiency look like? To answer this fundamental question, tools from stochastic geometry are used in this paper to model future cellular networks and obtain a new lower bound on the average uplink spectral efficiency. This enables us to formulate a tractable uplink energy efficiency (EE) maximization problem and solve it analytically with respect to the density of base stations (BSs), the transmit power levels, the number of BS antennas and users per cell, and the pilot reuse factor. The closed-form expressions obtained from this general EE maximization framework provide valuable insights on the interplay between the optimization variables, hardware characteristics, and propagation environment. Small cells are proved to give high EE, but the EE improvement saturates quickly with the BS density. Interestingly, the maximal EE is achieved by also equipping the BSs with multiple antennas and operate in a "massive MIMO" fashion, where the array gain from coherent detection mitigates interference and the multiplexing of many users reduces the energy cost per user.Comment: To appear in IEEE Journal on Selected Areas in Communications, 15 pages, 7 figures, 1 tabl