9 research outputs found
Privacy-Preserving Model Aggregation for Asynchronous Federated Learning
We present a novel privacy-preserving model aggregation for asynchronous
federated learning, named PPA-AFL that removes the restriction of synchronous
aggregation of local model updates in federated learning, while enabling the
protection of the local model updates against the server. In PPA-AFL, clients
can proactive decide when to engage in the training process, and sends local
model updates to the server when the updates are available. Thus, it is not
necessary to keep synchronicity with other clients. To safeguard client updates
and facilitate local model aggregation, we employ Paillier encryption for local
update encryption and support homomorphic aggregation. Furthermore, secret
sharing is utilized to enable the sharing of decryption keys and facilitate
privacy-preserving asynchronous aggregation. As a result, the server remains
unable to gain any information about the local updates while asynchronously
aggregating to produce the global model. We demonstrate the efficacy of our
proposed PPA-AFL framework through comprehensive complexity analysis and
extensive experiments on a prototype implementation, highlighting its potential
for practical adoption in privacy-sensitive asynchronous federated learning
scenarios
Secure and Privacy-preserving Network Slicing in 3GPP 5G System Architecture
Network slicing in 3GPP 5G system architecture has introduced significant
improvements in the flexibility and efficiency of mobile communication.
However, this new functionality poses challenges in maintaining the privacy of
mobile users, especially in multi-hop environments. In this paper, we propose a
secure and privacy-preserving network slicing protocol (SPNS) that combines 5G
network slicing and onion routing to address these challenges and provide
secure and efficient communication. Our approach enables mobile users to select
network slices while incorporating measures to prevent curious RAN nodes or
external attackers from accessing full slice information. Additionally, we
ensure that the 5G core network can authenticate all RANs, while avoiding
reliance on a single RAN for service provision. Besides, SPNS implements
end-to-end encryption for data transmission within the network slices,
providing an extra layer of privacy and security. Finally, we conducted
extensive experiments to evaluate the time cost of establishing network slice
links under varying conditions. SPNS provides a promising solution for
enhancing the privacy and security of communication in 5G networks
Printing ionic polymer metal composite actuators by fused deposition modeling technology
In this work, we printed a Nafion precursor membrane by fused deposition modeling (FDM) rapid prototyping technology and further fabricated IPMCs by electroless plating. The ion-exchange capacity of the Nafion membrane was tested, and the morphology of IPMCs was observed. The electro-mechanical properties of IPMCs under AC voltage inputs were studied, and grasping experiments were performed. The results show that the Nafion membrane after hydrolysis has a good ion-exchange ability and water-holding capacity. SEM observed that the thickness of the IPMC’s electrode layer was about 400 nm, and the platinum layer was tightly combined with the substrate membrane. When using a square wave input of 3.5 V and 0.1 Hz, the maximum current of IPMCs reached 0.30 A, and the displacement and blocking force were 7.57 mm and 10.5 mN, respectively. The new fabrication process ensures the good driving performance of the printed IPMC. And two pieces of IPMCs can capture the irregular objects successfully, indicating the feasibility of printing IPMCs by FDM technology. This paper provides a new and simple method for the fabrication of three-dimensional IPMCs, which can be further applied in flexible grippers and soft robotics
Removal of Methylene Blue from Water by BiFeO3/Carbon Fibre Nanocomposite and Its Photocatalytic Regeneration
It is essential to prepare a highly efficient and reproducible adsorbent for purifying industrial dye wastewater. In this work, a novel and efficient BiFeO3/carbon fiber (CCT-BFO) nanocomposite adsorbent was prepared by the template method and through optimizing the preparation process. The morphology, physicochemical properties, and specific surface characteristics of the CCT-BFO were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) patterns, Fourier-transform infrared spectrometer (FTIR), and N2 adsorption-desorption isotherm. The CCT-BFO could efficiently remove the Methylene blue (MB) from aqueous solutions, and the adsorption performance is not easily influenced by the environment. The equilibrium adsorption data were fitted to the classical models very well; the maximum capacity of adsorption MB onto the CCT-BFO was higher than many other reported adsorbents and the data of the adsorption kinetics were described by a pseudo-second-order model. Furthermore, the CCT-BFO can be recycled by photocatalytic regeneration. And the constant adsorption capacity was almost retained after recycling five times
Photo-Actuation of Liquid Crystalline Elastomer Materials Doped with Visible Absorber Dyes under Quasi-Daylight
We studied the effect of visible absorber dyes on the photo-actuation performances of liquid crystalline elastomer (LCE) materials under quasi-daylight irradiation. The dye-doped LCE materials were prepared through infiltrating visible absorber dyes into a polysiloxane-based LCE matrix based on its solvent-swollen characteristic. They demonstrated well absorption properties in visible spectrum range and performed strong actuation upon the irradiation from quasi-daylight source, thus indicating that the presence of visible absorber dyes effectively sensitized the LCE materials to light irradiation since the light energy was absorbed by the dyes and then converted into heat to trigger the phase change of LCE matrix. The photo-actuation properties of dye-doped LCE materials with different visible absorber dyes, varied dye contents, and irradiation intensities were investigated. It was shown that the visible absorber dyes with different absorption bands created different photo-actuation performances of LCE materials, the one whose absorption band is near the intensity peak position of quasi-daylight spectrum created the optimum photo-actuation performance. The result disclosed a valuable light utilization way for photo-controlled LCE materials since it revealed that a light-absorbing dye, whose absorption band is in the high intensity region of light spectrum, is capable of effectively utilizing light energy to drive the actuation of LCE materials
Microstructure and mechanical properties of 2319 aluminum alloy deposited by laser and cold metal transfer hybrid additive manufacturing
Wire and arc additively manufactured aluminum alloys are prone to porosity, leading to poor mechanical properties in samples, which hinders their broad industrial application. Laser and arc hybrid processes have garnered increasing attention for their potential to reduce porosity, stabilize the arc, and enhance deposition efficiency. This paper investigates the porosity, element distribution, microstructure evolution, and mechanical properties of 2319 aluminum alloy produced through the laser and cold metal transfer (laser-CMT) hybrid additive manufacturing process. In comparison with the as-deposited samples, the laser-CMT hybrid process decreases porosity, enhances element distribution, mitigates Cu element segregation, and results in increased θ′′ phase precipitation. Following T6 heat treatment, the ultimate tensile strength (UTS), yield strength (YS), and elongation of the x-direction specimens from the laser-CMT hybrid process are 450.0 MPa, 318.1 MPa, and 10.0%, respectively. These values are 11.27%, 7.03%, and 36.65% higher than those of the as-deposited samples. To validate the findings, a large-scale load-carrying frame for a commercial aircraft was fabricated, demonstrating the efficacy of the process. The paper also presents a detailed analysis of the strengthening mechanism. Samples deposited using the laser-CMT method exhibit reduced porosity and excellent mechanical properties, making this process promising for a wide range of applications