479 research outputs found
An adjustable focusing system for a 2 MeV H- ion beam line based on permanent magnet quadrupoles
A compact adjustable focusing system for a 2 MeV H- RFQ Linac is designed,
constructed and tested based on four permanent magnet quadrupoles (PMQ). A PMQ
model is realised using finite element simulations, providing an integrated
field gradient of 2.35 T with a maximal field gradient of 57 T/m. A prototype
is constructed and the magnetic field is measured, demonstrating good agreement
with the simulation. Particle track simulations provide initial values for the
quadrupole positions. Accordingly, four PMQs are constructed and assembled on
the beam line, their positions are then tuned to obtain a minimal beam spot
size of (1.2 x 2.2) mm^2 on target. This paper describes an adjustable PMQ beam
line for an external ion beam. The novel compact design based on commercially
available NdFeB magnets allows high flexibility for ion beam applications.Comment: published in JINST (4th Feb 2013
Ionization signals from electrons and alpha-particles in mixtures of liquid Argon and Nitrogen - perspectives on protons for Gamma Resonant Nuclear Absorption applications
In this paper we report on a detailed study of ionization signals produced by
Compton electrons and alpha-particles in a Time Projection Chamber (TPC) flled
with different mixtures of liquid Argon and Nitrogen. The measurements were
carried out with Nitrogen concentrations up to 15% and a drift electric feld in
the range 0-50 kV/cm. A prediction for proton ionization signals is made by
means of interpolation. This study has been conducted in view of the possible
use of liquid Ar-N2 TPCs for the detection of gamma-rays in the resonant band
of the Nitrogen absorption spectrum, a promising technology for security and
medical applications
30 kV coaxial vacuum-tight feedthrough for operation at cryogenic temperatures
In this paper we describe the technology of building a vacuum-tight high
voltage feedthrough which is able to operate at voltages up to 30 kV. The
feedthrough has a coaxial structure with a grounded sheath which makes it
capable to lead high voltage potentials into cryogenic liquids, without risk of
surface discharges in the gas phase above the liquid level. The feedthrough is
designed to be used in ionization detectors, based on liquefied noble gases,
such as Argon or Xenon
Proof of principle of a high-spatial-resolution, resonant-response gamma-ray detector for Gamma Resonance Absorption in 14N
The development of a mm-spatial-resolution, resonant-response detector based
on a micrometric glass capillary array filled with liquid scintillator is
described. This detector was developed for Gamma Resonance Absorption (GRA) in
14N. GRA is an automatic-decision radiographic screening technique that
combines high radiation penetration (the probe is a 9.17 MeV gamma ray) with
very good sensitivity and specificity to nitrogenous explosives. Detailed
simulation of the detector response to electrons and protons generated by the
9.17 MeV gamma-rays was followed by a proof-of-principle experiment, using a
mixed gamma-ray and neutron source. Towards this, a prototype capillary
detector was assembled, including the associated filling and readout systems.
Simulations and experimental results indeed show that proton tracks are
distinguishable from electron tracks at relevant energies, on the basis of a
criterion that combines track length and light intensity per unit length.Comment: 18 pages, 16 figure
A steerable UV laser system for the calibration of liquid argon time projection chambers
A number of liquid argon time projection chambers (LAr TPC's) are being build
or are proposed for neutrino experiments on long- and short baseline beams. For
these detectors a distortion in the drift field due to geometrical or physics
reasons can affect the reconstruction of the events. Depending on the TPC
geometry and electric drift field intensity this distortion could be of the
same magnitude as the drift field itself. Recently, we presented a method to
calibrate the drift field and correct for these possible distortions. While
straight cosmic ray muon tracks could be used for calibration, multiple coulomb
scattering and momentum uncertainties allow only a limited resolution. A UV
laser instead can create straight ionization tracks in liquid argon, and allows
one to map the drift field along different paths in the TPC inner volume. Here
we present a UV laser feed-through design with a steerable UV mirror immersed
in liquid argon that can point the laser beam at many locations through the
TPC. The straight ionization paths are sensitive to drift field distortions, a
fit of these distortion to the linear optical path allows to extract the drift
field, by using these laser tracks along the whole TPC volume one can obtain a
3D drift field map. The UV laser feed-through assembly is a prototype of the
system that will be used for the MicroBooNE experiment at the Fermi National
Accelerator Laboratory (FNAL)
On the Electric Breakdown in Liquid Argon at Centimeter Scale
We present a study on the dependence of electric breakdown discharge
properties on electrode geometry and the breakdown field in liquid argon near
its boiling point. The measurements were performed with a spherical cathode and
a planar anode at distances ranging from 0.1 mm to 10.0 mm. A detailed study of
the time evolution of the breakdown volt-ampere characteristics was performed
for the first time. It revealed a slow streamer development phase in the
discharge. The results of a spectroscopic study of the visible light emission
of the breakdowns complement the measurements. The light emission from the
initial phase of the discharge is attributed to electro-luminescence of liquid
argon following a current of drifting electrons. These results contribute to
set benchmarks for breakdown-safe design of ionization detectors, such as
Liquid Argon Time Projection Chambers (LAr TPC).Comment: Minor revision according to editor report. 17 pages, 15 figures, 2
tables. Turboencabulato
First measurement of inclusive electron-neutrino and antineutrino charged current differential cross sections in charged lepton energy on argon in MicroBooNE
We present the first measurement of the single-differential νe+¯νe charged-current inclusive cross sections on argon in electron or positron energy and in electron or positron scattering angle over the full range. Data were collected using the MicroBooNE liquid argon time projection chamber located off axis from the Fermilab neutrinos at the main injector beam over an exposure of 2.0×1020 protons on target. The signal definition includes a 60 MeV threshold on the νe or ¯νe energy and a 120 MeV threshold on the electron or positron energy. The measured total and differential cross sections are found to be in agreement with the genie, nuwro, and gibuu neutrino generators
A method to suppress dielectric breakdowns in liquid argon ionization detectors for cathode to ground distances of several millimeters
We present a method to reach electric field intensity as high as 400 kV/cm in
liquid argon for cathode-ground distances of several millimeters. This can be
achieved by suppressing field emission from the cathode, overcoming limitations
that we reported earlier
New CC0Ď€ GENIE model tune for MicroBooNE
Obtaining a high-quality interaction model with associated uncertainties is essential for neutrino experiments studying oscillations, nuclear scattering processes, or both. As a primary input to the MicroBooNE experiment’s next generation of neutrino cross section measurements and its flagship investigation of the MiniBooNE low-energy excess, we present a new tune of the charged-current pionless (CC0π) interaction cross section via the two major contributing processes—charged-current quasielastic and multinucleon interaction models—within version 3.0.6 of the GENIE neutrino event generator. Parameters in these models are tuned to muon neutrino CC0π cross section data obtained by the T2K experiment, which provides an independent set of neutrino interactions with a neutrino flux in a similar energy range to MicroBooNE’s neutrino beam. Although the fit is to muon neutrino data, the information carries over to electron neutrino simulation because the same underlying models are used in GENIE. A number of novel fit parameters were developed for this work, and the optimal parameters were chosen from existing and new sets. We choose to fit four parameters that have not previously been constrained by theory or data. Thus, this will be called a theory-driven tune. The result is an improved match to the T2K CC0π data with more well-motivated uncertainties based on the fit
- …