Brassica cover crops for weed control in organic vegetable production

Cover crops (or green manures) are commonly used by organic vegetable growers for soil fertility building and other benefits including weed control. Brassica crops have been reported to control weeds in subsequent crops, usually attributed to the allelopathic effects of glucosinolates (GSL) in the brassica residues, although the effects are inconsistent. New brassica varieties with high GSL levels (Brassica juncea cv. Fumus and Raphanus sativus cv. Weedcheck) were tested in combination with mechanical weed control and another locally grown forage crop (Lolium multiflorum cv. Conquest) for their effects on weed growth during the pre-crop phase and subsequent weed and lettuce growth during the in-crop phase. The cover crops and bare fallow controlled weeds effectively during the pre-crop phase, but did not affect weed and lettuce growth in the following in-crop phase. The cover crops provided better on-going weed control than the bare fallow. Reducing the delay between the pre- and in-crop phases from four weeks to one day did not affect weed and lettuce growth. Weed control was closely related to the amount of light reduction by the cover crops, while competition for nutrients and water appeared to be less important in weed suppression by the cover crops. The use of cover crops requires careful selection of appropriate varieties, attention to good cover crop husbandry (particularly establishment) and an awareness of prevailing weed seed bank levels

Advanced technology for minimum weight pressure vessel system

Bosses were made of fiber/resin composite materials to evaluate their potential in lightweight pressure vessels. An approximate 25% weight savings over the standard aluminum boss was achieved without boss failures during burst tests. Polymer liners and metal liners are used in fiber composite pressure vessels for containment of gases. The internal support of these liners required during the filament winding process has previously been provided by dissolvable salt mandrels. An internal pressurization technique has been developed which allows overwinding the liner without other means of support and without collapse. Study was made of several additional concepts including styrene/Saran, styrene/flexible epoxy

Single mode terahertz quantum cascade amplifier

A terahertz (THz) optical amplifier based on a 2.9 THz quantum cascade laser (QCL) structure has been demonstrated. By depositing an antireflective coating on the QCL facet, the laser mirror losses are enhanced to fully suppress the lasing action, creating a THz quantum cascade (QC) amplifier. Terahertz radiation amplification has been obtained, by coupling a separate multi-mode THz QCL of the same active region design to the QC amplifier. A bare cavity gain is achieved and shows excellent agreement with the lasing spectrum from the original QCL without the antireflective coating. Furthermore, a maximum optical gain of ∼30 dB with single-mode radiation output is demonstrated

Single mode terahertz quantum cascade amplifier

A terahertz (THz) optical amplifier based on a 2.9 THz quantum cascade laser (QCL) structure has been demonstrated. By depositing an antireflective coating on the QCL facet, the laser mirror losses are enhanced to fully suppress the lasing action, creating a THz quantum cascade (QC) amplifier. Terahertz radiation amplification has been obtained, by coupling a separate multi-mode THz QCL of the same active region design to the QC amplifier. A bare cavity gain is achieved and shows excellent agreement with the lasing spectrum from the original QCL without the antireflective coating. Furthermore, a maximum optical gain of ∼30 dB with single-mode radiation output is demonstrated

High-performance fiber/epoxy composite pressure vessels

Activities described include: (1) determining the applicability of an ultrahigh-strength graphite fiber to composite pressure vessels; (2) defining the fatigue performance of thin-titanium-lined, high-strength graphite/epoxy pressure vessel; (3) selecting epoxy resin systems suitable for filament winding; (4) studying the fatigue life potential of Kevlar 49/epoxy pressure vessels; and (5) developing polymer liners for composite pressure vessels. Kevlar 49/epoxy and graphite fiber/epoxy pressure vessels, 10.2 cm in diameter, some with aluminum liners and some with alternation layers of rubber and polymer were fabricated. To determine liner performance, vessels were subjected to gas permeation tests, fatigue cycling, and burst tests, measuring composite performance, fatigue life, and leak rates. Both the metal and the rubber/polymer liner performed well. Proportionately larger pressure vessels (20.3 and 38 cm in diameter) were made and subjected to the same tests. In these larger vessels, line leakage problems with both liners developed the causes of the leaks were identified and some solutions to such liner problems are recommended

Defining Short-Term Accommodation for Animals

Abstract The terms short-term, temporary, and transitional are related but can have different contexts and meanings for animal husbandry. The definitions and use of these terms can be pivotal to animal housing and welfare. We conducted three separate literature searches using Google Scholar for relevant reports regarding short-term, temporary, or transitional animal husbandry, and analysed key publications that stipulate relevant periods of accommodation. English Government guidance regarding acceptable short-term, temporary, or transitional accommodation for animals varies widely from 24 h, all animals at all facilities should be accommodated in conditions that are consistent with long-term housing, husbandry, and best practices

Reptile expos: an analysis and recommendations for control.

Reptile expos are typically itinerant events at which live wild-caught and/or captive-bred turtles, tortoises, crocodiles, lizards, and snakes are displayed, sold, or exchanged for pet keeping purposes. We conducted a literature review and analysis of reports regarding animal welfare and public health issues of concern associated with the display and sale of reptiles at expos in Europe and North America. We also conducted a limited survey of several relevant government authorities to briefly appraise existing situations regarding governance and law internationally, and performed a further limited examination of online advertisements in order to estimate the number of events. In addition, we conducted an analysis comparing husbandry standards for reptile expos versus other animal display or sale situations using UK formal legal guidance, which adopts the Five Welfare Needs as a basis. Finally, we also conducted a SWOT (strengths, weaknesses, opportunities, and threats) analysis of key features associated with reptile expos. We identified at least 10 animal welfare and 5 public health and safety problems as occurring and endemic to the typical operation of reptile expos. Comparisons between the ways in which animal welfare and public health issues are regarded or managed for reptile expos in relation to, for example, traditional zoos, mobile zoos, and pet sales are stark and concerning, with expos constituting the least protective and potentially most harmful situations out of all captive reptile-keeping scenarios. The lack of monitoring and control of reptile expos, combined with their frequent occurrence, strongly indicates the requirement to urgently control and prohibit these events. We recommend that where reptile expos are already essentially prohibited such bans should be immutable and not subject to any weakening provisions. Where reptile expos are permitted and/or subject to limiting conditions, or where reptile expos are not subject to limiting conditions, then our recommended 40 stipulations and overarching control principles should be applied as interim mitigating measures pending the introduction of prohibitions or ‘bans’. Governments should aim to ensure that enforcement of such measures is robust

Agronomic and economic evaluation of weed management methods in organic herb and vegetable production systems

Weed management is reported to be a major constraint in organic agriculture. Organic growers also report a lack of information about non-chemical weed control. A series of field trials was conducted in lettuce (Lactuca sativa L.) and echinacea (Echinacea purpurea (L.) Moench) crops to evaluate a range of weed control methods commonly used in organic herb and vegetable production systems. The criteria for evaluating the methods were weed growth, crop yield and cost effectiveness. Hand weeding, tillage and organic mulches (hay and pelletised paper) were effective to very effective at suppressing weeds. In general, good weed suppression was correlated with good crop yields; however, crop yields were reduced by tillage and paper mulch. Deducting the cost of the weed control method from the gross crop value caused a greater re-ranking of the treatment performance in lettuce than in echinacea. This is partly due to the different growing season lengths and market prices of the two test crops. The most cost effective methods for managing weeds in lettuce were tillage and hand weeding. When weed competition is low, the unweeded control treatment was also cost effective. In echinacea, hand weeding and hay mulch were consistently the most cost effective methods for managing weeds