ROTEX-TRIIFEX: Proposal for a joint FRG-USA telerobotic flight experiment

The concepts and main elements of a RObot Technology EXperiment (ROTEX) proposed to fly with the next German spacelab mission, D2, are presented. It provides a 1 meter size, six axis robot inside a spacelab rack, equipped with a multisensory gripper (force-torque sensors, an array of range finders, and mini stereo cameras). The robot will perform assembly and servicing tasks in a generic way, and will grasp a floating object. The man machine and supervisory control concepts for teleoperation from the spacelab and from ground are discussed. The predictive estimation schemes for an extensive use of time-delay compensating 3D computer graphics are explained

A robotic mobile platform for service tasks in cultural heritage

Recently, the preservation and survey of cultural heritage goods is attracting increasing interest from the media. Several famous historical sites seem to require an increased effort to maintain their preservation. Nevertheless, it is very difficult to find sufficient funds and human resources to fulfil these needs. Accordingly, this paper outlines a specific application of service robotics to cultural heritage, with the aim to reduce the required time and costs for surveying and maintaining cultural heritage goods. These applications require careful attention paid to the proper design of a robotic mobile platform with the features necessary to fulfil tasks of architectonic survey and preservation. To this end, specific operation scenarios have been carefully described in order to identify the specific design requirements and constraints that are raised by, for example, the necessity of operation over delicate surfaces, or the presence of unevenness or obstacles. The authors then propose a design solution for a service robot fit for the analysis, survey and conservation of historical sites, as based on the characteristics of the outlined scenarios. A preliminary prototype is also described herewith, in order to show its engineering feasibility in relation to the simulated operation scenarios

Workspace comparisons of setup configurations for human-robot interaction

In virtual assembly verification or remote maintenance tasks, bimanual haptic interfaces play a crucial role in successful task completion. This paper proposes a method for objectively comparing how well a haptic interface covers the reachable workspace of human arms. Two system configurations are analyzed for a recently introduced haptic device that is based on two DLR-KUKA light weight robots: the standard configuration, where the device is opposite the human operator, and the ergonomic configuration, where the haptic device is mounted behind the human operator. The human operator directly controls the robotic arms using handles. The analysis is performed using a representation of the robot arm workspace. The merits of restricting the comparisons to the most significant regions of the human workspace are discussed. Using this method, a greater workspace correspondence for the ergonomic configuration was shown. ©2010 IEEE

Telerobotics : methodology for the development of a through-the-internet robotic teleoperated system

This work presents a methodology for the development of Teleoperated Robotic Systems through the Internet. Initially, it is presented a bibliographical review of the Telerobotic systems that uses Internet as way of control. The methodology is implemented and tested through the development of two systems. The first is a manipulator with two degrees of freedom commanded remotely through the Internet denominated RobWebCam (http://www.graco.unb.br/robwebcam). The second is a system which teleoperates an ABB (Asea Brown Boveri) Industrial Robot of six degrees of freedom denominated RobWebLink (http://webrobot.graco.unb.br). RobWebCam is composed of a manipulator with two degrees of freedom, a video camera, Internet, computers and communication driver between the manipulator and the Unix system; and RobWebLink composed of the same components plus the Industrial Robot. With the use of this technology, it is possible to move far distant positioning objects minimizing transport costs, materials and people; acting in real time in the process that is wanted to be controller. This work demonstrates that the teleoperating via Internet of robotic systems and other equipments is viable, in spite of using rate transmission data with low bandwidth. Possible applications include remote surveillance, control and remote diagnosis and maintenance of machines and equipments

Low-Latency Lunar Surface Telerobotics from Earth-Moon Libration Points

Concepts for a long-duration habitat at Earth-Moon LI or L2 have been advanced for a number of purposes. We propose here that such a facility could also have an important role for low-latency telerobotic control of lunar surface equipment, both for lunar science and development. With distances of about 60,000 km from the lunar surface, such sites offer light-time limited two-way control latencies of order 400 ms, making telerobotic control for those sites close to real time as perceived by a human operator. We point out that even for transcontinental teleoperated surgical procedures, which require operational precision and highly dexterous manipulation, control latencies of this order are considered adequate. Terrestrial telerobots that are used routinely for mining and manufacturing also involve control latencies of order several hundred milliseconds. For this reason, an Earth-Moon LI or L2 control node could build on the technology and experience base of commercially proven terrestrial ventures. A lunar libration-point telerobotic node could demonstrate exploration strategies that would eventually be used on Mars, and many other less hospitable destinations in the solar system. Libration-point telepresence for the Moon contrasts with lunar telerobotic control from the Earth, for which two-way control latencies are at least six times longer. For control latencies that long, telerobotic control efforts are of the "move-and-wait" variety, which is cognitively inferior to near real-time control

An Integrated Decision Making Approach for Adaptive Shared Control of Mobility Assistance Robots

© 2016, Springer Science+Business Media Dordrecht. Mobility assistance robots provide support to elderly or patients during walking. The design of a safe and intuitive assistance behavior is one of the major challenges in this context. We present an integrated approach for the context-specific, on-line adaptation of the assistance level of a rollator-type mobility assistance robot by gain-scheduling of low-level robot control parameters. A human-inspired decision-making model, the drift-diffusion Model, is introduced as the key principle to gain-schedule parameters and with this to adapt the provided robot assistance in order to achieve a human-like assistive behavior. The mobility assistance robot is designed to provide (a) cognitive assistance to help the user following a desired path towards a predefined destination as well as (b) sensorial assistance to avoid collisions with obstacles while allowing for an intentional approach of them. Further, the robot observes the user long-term performance and fatigue to adapt the overall level of (c) physical assistance provided. For each type of assistance a decision-making problem is formulated that affects different low-level control parameters. The effectiveness of the proposed approach is demonstrated in technical validation experiments. Moreover, the proposed approach is evaluated in a user study with 35 elderly persons. Obtained results indicate that the proposed gain-scheduling technique incorporating ideas of human decision-making models shows a general high potential for the application in adaptive shared control of mobility assistance robots

Feedback linearization and simultaneous stiffness-position control of robots with antagonistic actuated joints.

In this paper, the dynamic model of a robot with antagonistic actuated joints is presented, and the problem of full linearization via static state feedback is analyzed. The use of transmission elements with nonlinear relation between the displacement and the actuated force allows to control both the position and the stiffness of each joint. The main advantage of this actuation modality is that the achieved stiffness becomes same mechanical characteristic of the system and it is not the result of an immediate control action as in the classical impedance control scheme. Different examples of implementation of this kind of devices are known in literature, even if limited to one single joint and the application of antagonistic actuated kinematic chains in the field of robotic hand design is under investigation. After a brief review of the dependence of the properties of antagonistic actuation on the transmission elements characteristics, a scheme for simultaneous stiffness-position control of the linearized system is presented. Finally, simulation results of a two-link antagonistic actuated arm are reported and discussed