The Influence of Material and Roughness on the Settlement and the Adhesive Strength of the Barnacle Balanus Improvisus in the Baltic Sea

Under natural conditions, barnacles, one of the most prominent marine hardfouling organisms, encounter a vast variety of heterogeneous surfaces including artificial ones, such as ship hulls on which they adhere efficiently. Despite intensive research in the last decades, it is still not clear, how material related factors influence the fouling development under natural conditions, and whether roughness at the micro scale affects the release dynamics of barnacles. In order to shed light on the relationship between these substrate factors and their effect on biofouling, both settlement and fouling development of Balanus (= Amphibalanus) improvisus was evaluated on epoxy resin and polyvinylsiloxane (PVS) substrates differing in their roughness (flat, asperity sizes: 0.3, 1, 3, 9, 12 μm) in a static field trial in the Baltic Sea for 17 weeks performed in 2014. All barnacles on these tested surfaces were individually tracked on a weekly basis, in order to calculate the release-to-settlement ratios (r/s), to evaluate the fouling- release performance and to monitor the actual attachment duration. It was demonstrated that both stiffness and surface free energy had no strong effect on initial settlement. The total fouling accumulation was nearly identical for epoxy resin and PVS, if fallen-off barnacles were included in the analysis. Roughness influenced initial settlement and fouling development. On PVS the r/s ranged between 0.5 and 0.7 and the attachment duration was around 4 weeks. However, samples with a roughness of 9 μm displayed a lower r/s ratio (0.35) and barnacles showed longer attachment durations (8 weeks). In a second field trial performed in 2017, attachment forces of barnacles were measured after the samples had been immersed for 10 weeks in the Baltic Sea. The shear stresses obtained were similar for substrates with different roughness with around 0.12 MPa and were independent of the barnacle’s size. These findings show that roughness even at the micro scale can impact the fouling release ability of a surface

Dry under water: air retaining properties of large-scale elastomer foils covered with mushroom-shaped surface microstructures

Superhydrophobic surfaces are well known for most different functions in plants, animals, and thus for biomimetic technical applications. Beside the Lotus Effect, one of their features with great technical, economic and ecologic potential is the Salvinia Effect, the capability to keep a stable air layer when submerged under water. Such air layers are of great importance, e.g., for drag reduction (passive air lubrication), antifouling, sensor applications or oil–water separation. Some biological models, e.g., the floating fern Salvinia or the backswimmer Notonecta, show long term stable air retention even under hydrodynamic conditions. Therefore, they are ideal models for the development of technical biomimetic air retaining surfaces. Up to now, several prototypes of such surfaces have been developed, but none provides both, stable air retention and cost effective large scale production. Meanwhile, a novel biomimetic surface is commercially available and produced on a large scale: an adhesive elastomeric film with mushroom-shaped surface microstructures that mimic the adhesion system of animals. In this study, we show that these films, which have been initially developed for a different purpose, due to their specific geometry at the microscale, are capable of stable air retention under water. We present first results concerning the capabilities of mushroom-shaped surface microstructures and show that this elastomer foil is able to stabilize a permanent air layer under water for more than two weeks. Further, the stability of the air layer under pressure was investigated and these results are compared with the predicted theoretical values for air retention of microstructured surfaces. Here, we could show that they fit to the theoretical predictions and that the biomimetic elastomer foil is a promising base for the development of an economically and efficient biomimetic air retaining surface for a broad range of technical applications

The exceptional attachment ability of the ectoparasitic bee louse Braula coeca (Diptera, Braulidae) on the honeybee

Bee lice (Braulidae) are small parasitic flies, which are adapted to live on their bee host. As such, the wingless Braula coeca is a parasite of the common honey bee Apis mellifera and it is well adapted to attach to its hairy surface. The attachment system of B. coeca provides a secure grip on the fine setae of the bee. This is crucial for the parasite survival, as detachment from the host is fatal for the bee louse. The feet morphology of B. coeca is well adapted to the challenging bee surface, notably by strongly broadened claws, which are split into a high number of comb-like teeth, perfectly matching the diameter of the bee hairs. Based on microscopy observations, both the morphology and material composition of the tarsi of B. coeca are characterized in detail. Using high-speed video analysis, we combine the morphology data on the attachment system with a behavioural context. Furthermore, we directly measured the attachment forces generated by the bee lice in contact with the host. In particular, the claws are involved in attachment to the host, as the interstices between the teeth-like spines allow for the collection of several hairs and generate strong friction, when the hairs slip to the narrow gap between the spines. The overall morphology of the tarsus produces strong attachment, with average safety factors (force per body weight) around 1130, and stabilizes the tarsal chain with lateral stoppers against overflexion, but also allows for the fast detachment by the tarsal chain torsion.Deutsche Forschungsgemeinschaft; Human Frontier Science Program and the National Research Foundation.https://onlinelibrary.wiley.com/journal/13653032hj2021Zoology and Entomolog

Friction behavior of a microstructured polymer surface inspired by snake skin

The aim of this study was to understand the influence of microstructures found on ventral scales of the biological model, Lampropeltis getula californiae, the California King Snake, on the friction behavior. For this purpose, we compared snake-inspired anisotropic microstructured surfaces to other microstructured surfaces with isotropic and anisotropic geometry. To exclude that the friction measurements were influenced by physico-chemical variations, all friction measurements were performed on the same epoxy polymer. For frictional measurements a microtribometer was used. Original data were processed by fast Fourier transformation (FFT) with a zero frequency related to the average friction and other peaks resulting from periodic stick-slip behavior. The data showed that the specific ventral surface ornamentation of snakes does not only reduce the frictional coefficient and generate anisotropic frictional properties, but also reduces stick-slip vibrations during sliding, which might be an adaptation to reduce wear. Based on this extensive comparative study of different microstructured polymer samples, it was experimentally demonstrated that the friction-induced stick-slip behavior does not solely depend on the frictional coefficient of the contact pair

Direct observation of microcavitation in underwater adhesion of mushroom-shaped adhesive microstructure

In this work we report on experiments aimed at testing the cavitation hypothesis [Varenberg, M.; Gorb, S. J. R. Soc., Interface 2008, 5, 383–385] proposed to explain the strong underwater adhesion of mushroom-shaped adhesive microstructures (MSAMSs). For this purpose, we measured the pull-off forces of individual MSAMSs by detaching them from a glass substrate under different wetting conditions and simultaneously video recording the detachment behavior at very high temporal resolution (54,000–100,000 fps). Although microcavitation was observed during the detachment of individual MSAMSs, which was a consequence of water inclusions present at the glass–MSAMS contact interface subjected to negative pressure (tension), the pull-off forces were consistently lower, around 50%, of those measured under ambient conditions. This result supports the assumption that the recently observed strong underwater adhesion of MSAMS is due to an air layer between individual MSAMSs [Kizilkan, E.; Heepe, L.; Gorb, S. N. Underwater adhesion of mushroom-shaped adhesive microstructure: An air-entrapment effect. In Biological and biomimetic adhesives: Challenges and opportunities; Santos, R.; Aldred, N.; Gorb, S. N.; Flammang, P., Eds.; The Royal Society of Chemistry: Cambridge, U.K., 2013; pp 65–71] rather than by cavitation. These results obtained due to the high-speed visualisation of the contact behavior at nanoscale-confined interfaces allow for a microscopic understanding of the underwater adhesion of MSAMSs and may aid in further development of artificial adhesive microstructures for applications in predominantly liquid environments

Influence of ambient humidity on the attachment ability of ladybird beetles (Coccinella septempunctata)

Many insects possess adhesive foot pads, which enable them to scale smooth vertical surfaces. The function of these organs may be highly affected by environmental conditions. Ladybird beetles (Coccinellidae) possess dense tarsal soles of tenent setae, supplemented with an adhesive fluid. We studied the attachment ability of the seven-spotted ladybird beetle (Coccinella septempunctata) at different humidities by horizontal traction experiments. We found that both low (15%) and high (99%) relative humidities lead to a decrease of attachment ability. The significantly highest attachment forces were revealed at 60% humidity. This relationship was found both in female and male beetles, despite of a deviating structure of adhesive setae and a significant difference in forces between sexes. These findings demonstrate that not only dry adhesive setae are affected by ambient humidity, but also setae that stick due to the capillarity of an oily secretion.8 page(s

Granular Media Friction Pad for Robot Shoes—Hexagon Patterning Enhances Friction on Wet Surfaces

For maximizing friction forces of robotic legs on an unknown/unpredictable substrate, we introduced the granular media friction pad, consisting of a thin elastic membrane encasing loosely filled granular material. On coming into contact with a substrate, the fluid-like granular material flows around the substrate asperities and achieves large contact areas with the substrate. Upon applying load, the granular material undergoes the jamming transition, rigidifies and becomes solid-like. High friction forces are generated by mechanical interlocking on rough substrates, internal friction of the granular media and by the enhanced contact area caused by the deformation of the membrane. This system can adapt to a large variety of dry substrate topologies. To further increase its performance on moist or wet substrates, we adapted the granular media friction pad by structuring the outside of the membrane with a 3D hexagonal pattern. This results in a significant increase in friction under lubricated conditions, thus greatly increasing the universal applicability of the granular media friction pad for a multitude of environments