Finite element modeling of laser assisted friction stir welding of carbon steels for enhanced sustainability of welded joints

Part of: Seliger, Günther (Ed.): Innovative solutions : proceedings / 11th Global Conference on Sustainable Manufacturing, Berlin, Germany, 23rd - 25th September, 2013. - Berlin: Universitätsverlag der TU Berlin, 2013. - ISBN 978-3-7983-2609-5 (online). - http://nbn-resolving.de/urn:nbn:de:kobv:83-opus4-40276. - pp. 247-251.In Friction stir welding (FSW) of carbon steels, process parameters must be set to avoid defects such as warm holes. Proper selection of process parameters also affects the final grain microstructure and phase transformations and, ultimately, the weld’s mechanical properties. Process parameters, including laserassisted heating, of AISI 1045 carbon steel were investigated via a 3D finite element method (FEM) model. The laser action was modeled as heat source with constant flux. The simulation findings favorably agree with experiments reported in the literature and suggesting that with laser-assisted-FSW welding can be performed at higher traverse speeds (400 vs. 100 mm/min) while maintaining defect free weld. Also, evolved phase transformations are predicted across the weld geometry as time progresses. Such findings will help in the prediction of sound welding parameters and in estimating the mechanical properties of the various regions of the weld leading to more sustainable joints

Rotary Friction Welding Versus Fusion Butt Welding of Plastic Pipes – Feasibility and Energy Perspective

According to the Plastics Pipe Institute, butt fusion is the most widely used method for joining lengths of PE pipe and pipe to PE fittings “by heat fusion” (https://plasticpipe.org/pdf/chapter09.pdf). However, butt-welding is not energy-cognizant from the point of view of a phase-change fabrication method. This is because the source of heating is external (heater plate). The initial heating and subsequent maintenance at relatively high temperature (above 200 C for welding of high-density polyethylene pipe) is energy intensive. Rotary friction welding, on the other hand focuses the energy where and when as needed because it uses electric motor to generate mechanical (spinning) motion that is converted to heat. This work will make the case for friction heating as energy efficient. An initial feasibility study will also be introduced to demonstrate that the resulting welded pipe joints may be of comparable quality to those produced by butt fusion and to virgin PE material

Three-dimensional adaptive evolution of gravitational waves in numerical relativity

Adaptive techniques are crucial for successful numerical modeling of gravitational waves from astrophysical sources such as coalescing compact binaries, since the radiation typically has wavelengths much larger than the scale of the sources. We have carried out an important step toward this goal, the evolution of weak gravitational waves using adaptive mesh refinement in the Einstein equations. The 2-level adaptive simulation is compared with unigrid runs at coarse and fine resolution, and is shown to track closely the features of the fine grid run.Comment: REVTeX, 7 pages, including three figures; submitted to Physical Review

Evaluation of 3 rapid diagnostic tests (CareStart) Malaria 3 line pl.DH (Pan, Pf), OptiMAL-IT pl.DH (Pan, Pf) and CareStart 0 2 line.pl.DH (Pan) for the diagnosis of malaria in Myanmar

Presented at the conference of the American Society of Tropical Medicine and Hygiene 200

Developing a methodology towards sustainable PCD compact core drilling on planet Mars

ABSTRACT This paper describes a study of core drilling into basalt rock in anticipation of a Mars mission. Since the objective is to maintain a sustainable drilling mission on this distant planet, we perform a methodical study to examine parameters which influence sustainability including PCD tool-wear and drilling forces. INTRODUCTION Two gradual modes of insert-wear are experimentally measured: flank wear (VB) and cutting edge radius wear (CERW). Furthermore, relevant equations that relate wear to several factors including rock strength and process parameters are developed. The findings suggest a strong influence of rock hardness, process parameters, and tool geometry on tool-wear. Similar functional dependence is found for the generated thrust force and torque on rock hardness, rake angle, spindle speed, and drill feed. Consequently, equations are derived to model thrust force and torque as functions of these variables

Numerical Relativity: A review

Computer simulations are enabling researchers to investigate systems which are extremely difficult to handle analytically. In the particular case of General Relativity, numerical models have proved extremely valuable for investigations of strong field scenarios and been crucial to reveal unexpected phenomena. Considerable efforts are being spent to simulate astrophysically relevant simulations, understand different aspects of the theory and even provide insights in the search for a quantum theory of gravity. In the present article I review the present status of the field of Numerical Relativity, describe the techniques most commonly used and discuss open problems and (some) future prospects.Comment: 2 References added; 1 corrected. 67 pages. To appear in Classical and Quantum Gravity. (uses iopart.cls

Rational use of antibiotics by community health workers and caregivers for children with suspected pneumonia in Zambia: A cross-sectional mixed methods study

Background: Antibiotic resistance is an issue of growing global concern. One key strategy to minimise further development of resistance is the rational use of antibiotics, by providers and patients alike. Through integrated community case management (iCCM), children diagnosed with suspected pneumonia are treated with antibiotics; one component of an essential package to reduce child mortality and increase access to health care for remote populations. Through the use of clinical algorithms, supportive supervision and training, iCCM also offers the opportunity to improve the rational use of antibiotics and limit the spread of resistance in resource-poor contexts. This study provides evidence on antibiotic use by community health workers (CHWs) and caregivers to inform iCCM programmes, safeguarding current treatments whilst maximising access to care. Methods: 1497 CHW consultations were directly observed by non-clinical researchers, with measurement of respiratory rate by CHWs recorded by video. Videos were used to conduct a retrospective reference standard assessment of respiratory rate by experts. Fifty-five caregivers whose children were prescribed a 5-day course of antibiotics for suspected pneumonia were followed up on day six to assess adherence through structured interviews and pill counts. Six focus group discussions and nine in depth interviews were conducted with CHWs and caregivers to supplement quantitative findings. Results: The findings indicate that CHWs adhered to treatment guidelines for 92 % of children seen, prescribing treatment corresponding to their assessment. However, only 65 % of antibiotics prescribed were given for children with experts' confirmed fast breathing pneumonia. Qualitative data indicates that CHWs have a good understanding of pneumonia diagnosis, and although caregivers sometimes applied pressure to receive drugs, CHWs stated that treatment decisions were not influenced. 46 % of caregivers were fully adherent and gave their child the full 5-day course of dispersible amoxicillin. If caregivers who gave treatment for 3 to 5 days were considered, adherence increased to 76 %. Conclusions: CHWs are capable of prescribing treatment corresponding to their assessment of respiratory rate. However, rational use of antibiotics could be strengthened through improved respiratory rate assessment, and better diagnostic tools. Furthermore, a shorter course of dispersible amoxicillin could potentially improve caregiver adherence, reducing risk of resistance and cost

Placental Plasmodium falciparum malaria infection: Operational accuracy of HRP2 rapid diagnostic tests in a malaria endemic setting

<p>Abstract</p> <p>Background</p> <p>Malaria has a negative effect on the outcome of pregnancy. Pregnant women are at high risk of severe malaria and severe haemolytic anaemia, which contribute 60-70% of foetal and perinatal losses. Peripheral blood smear microscopy under-estimates sequestered placental infections, therefore malaria rapid diagnostic tests (RDTs) detecting histidine rich protein-2 antigen (HRP-2) in peripheral blood are a potential alternative.</p> <p>Methods</p> <p>HRP-2 RDTs accuracy in detecting malaria in pregnancy (MIP >28 weeks gestation) and placental <it>Plasmodium falciparum </it>malaria (after childbirth) were conducted using Giemsa microscopy and placental histopathology respectively as the reference standard. The study was conducted in Mbale Hospital, using the midwives to perform and interpret the RDT results. Discordant results samples were spot checked using PCR techniques.</p> <p>Results</p> <p>Among 433 febrile women tested, RDTs had a sensitivity of 96.8% (95% CI 92-98.8), specificity of 73.5% (95% CI 67.8-78.6), a positive predictive value (PPV) of 68.0% (95% CI 61.4-73.9), and negative predictive value (NPV) of 97.5% (95% CI 94.0-99.0) in detecting peripheral <it>P. falciparum </it>malaria during pregnancy. At delivery, in non-symptomatic women, RDTs had a 80.9% sensitivity (95% CI 57.4-93.7) and a 87.5% specificity (95%CI 80.9-92.1), PPV of 47.2% (95% CI 30.7-64.2) and NPV of 97.1% (95% CI 92.2-99.1) in detecting placental <it>P. falciparum </it>infections among 173 samples. At delivery, 41% of peripheral infections were detected by microscopy without concurrent placental infection. The combination of RDTs and microscopy improved the sensitivity to 90.5% and the specificity to 98.4% for detecting placental malaria infection (McNemar's <it>X </it>²> 3.84). RDTs were not superior to microscopy in detecting placental infection (McNemar's <it>X </it>²< 3.84). Presence of malaria in pregnancy and active placental malaria infection were 38% and 12% respectively. Placental infections were associated with poor pregnancy outcome [pre-term, still birth and low birth weight] (aOR = 37.9) and late pregnancy malaria infection (aOR = 20.9). Mosquito net use (aOR 2.1) and increasing parity (aOR 2.7) were associated with lower risk for malaria in pregnancy.</p> <p>Conclusion</p> <p>Use of HRP-2 RDTs to detect malaria in pregnancy in symptomatic women was accurate when performed by midwives. A combination of RDTs and microscopy provided the best means of detecting placental malaria. RDTs were not superior to microscopy in detecting placental infection. With a high sensitivity and specificity, RDTs could be a useful tool for assessing malaria in pregnancy, with further (cost-) effectiveness studies.</p

Erratum to: Changes in patterns of uveitis at a tertiary referral center in Northern Italy: analysis of 990 consecutive cases

Erratum to: Changes in patterns of uveitis at a tertiary referral center in Northern Italy: analysis of 990 consecutive case

Fighting Software Piracy: Which Governance Tools Matter in Africa?

This article integrates previously missing components of government quality into the governance-piracy nexus in exploring governance mechanisms by which global obligations for the treatment of IPRs are effectively transmitted from international to the national level in the battle against piracy. It assesses the best governance tools in the fight against piracy and upholding of Intellectual Property Rights (IPRs). The instrumentality of IPR laws (treaties) in tackling piracy through good governance mechanisms is also examined. Findings demonstrate that: (1) while all governance tools under consideration significantly decrease the incidence of piracy, corruption-control is the most effective weapon; (2) but for voice and accountability, political stability and democracy, IPR laws (treaties) are instrumental in tackling piracy through government quality dynamics of rule of law, regulation quality, government effectiveness, corruption-control, and press freedom. Hence, the need for a policy approach most conducive to expanding development is to implement an integrated system of both IPRs and corollary good governance policies. Moreover, our findings support the relevance of good governance measures in developing countries wishing to complement their emerging IPR regimes