40 research outputs found
Equivalent thermal diffusivity of natural and recycled aggregate concrete at temperature up to 350 ⁰C
The paper presents the evolution of equivalent thermal diffusivity with temperature of concretes with natural coarse aggregates and recycled concrete aggregates. Thermal diffusivity was evaluated based on the temperature measurements made on cylindrical samples using so-called "inverse technique". Thermal diffusivity parameter was estimated for concretes manufactured with different replacement ratios of natural by recycled coarse aggregate (0, 50 and 100 %) produced by crushing the worn-out concrete pavement that was dismounted after exploitation period. The diffusivity of concrete was tested up to 350 ◦C. The progressive decrease of thermal diffusivity was observed, and the lowest D values were obtained for higher recycled concrete aggregates content. The results were presented against the background of other authors results and referred to the D values proposed in EUROCODE 2
SMART geopolymers, an ERA-MIN project
Please click Additional Files below to see the full abstract
Comportement à haute température des bétons à haute performance (évolution des principales propriétés mécaniques)
MARNE-LA-VALLEE-ENPC-BIBL. (774682303) / SudocSudocFranceF
Role of Polypropylene Fibres in Concrete Spalling Risk Mitigation in Fire and Test Methods of Fibres Effectiveness Evaluation
The explosive behaviour of concrete in fire is observed in rapidly heated concrete. The main factors controlling the occurrence of spalling are related to the material’s low porosity and high density as well as the limited ability to transport gases and liquids. Thus, for high-strength, ultrahigh-strength, and reactive powder concrete, the risk of spalling is much higher than for normal-strength concrete. The paper presents the discussion on the leading hypothesis concerning the occurrence of concrete spalling. Moreover, the methods for spalling prevention, such as polypropylene fibre application, which has been found to be an effective technological solution for preventing the occurrence of spalling, are presented. Various tests and testing protocols are used to screen concrete mixes propensity toward spalling and to evaluate the polypropylene fibres’ effectiveness in spalling risk mitigation. The most effective testing methods were selected and their advantages were presented in the paper. The review was based mainly on the authors’ experiences regarding high performance concrete, reactive powder concrete testing, and observations on the effect of polypropylene fibres on material behaviour at high temperature
Evolution of Mechanical Properties with Time of Fly-Ash-Based Geopolymer Mortars under the Effect of Granulated Ground Blast Furnace Slag Addition
Geopolymers are considered to alternatives to Portland cement, providing an opportunity to exploit aluminosilicate wastes or co-products with promising performances in the construction sector. This research is aimed at investigating the strength of fly-ash-geopolymers of different ages. The effect of granulated blast furnace slag (GGBFS) as a partial replacement of fly ash (FA) on the tensile (ft) and compressive strength (fc), as well as the modulus of elasticity, is investigated. The main advantage of the developed geopolymer mixes containing GGBFS is their ability to set and harden at room temperature with no need for heating to obtain binding properties, reducing the energy consumption of their production processes. This procedure presents a huge advantage over binders requiring heat curing, constituting a significant energy savings and reduction of CO2 emissions. It is found that the development of strength strongly depends on the ratio of fly-ash to granulated blast furnace slag. With the highest amount of GGBFS, the compressive strength of geopolymers made of fly-ash reached 63 MPa after 28 days of curing at ambient temperature. The evolution of compressive strength with time is correlated with the development of ultrasound pulse velocity methods, which are used to evaluate maturity. The modulus of elasticity changes with strength and the relationship obtained for the geopolymer is presented on the basis of typical models used for cement-based materials. The tensile to compressive strength ratios of the tested geopolymers are identified as higher than for cementitious binders, and the ft(fc) relationship is juxtaposed with dependencies known for cement binders, showing that the square root function gives the best fit to the results
Concrete propensity to fire spalling: testing and observations
This article presents results of fire spalling tests on small concrete slabs and studies of material parameters that may increase its occurrence. Experimental techniques enabling to study and determination of material features are presented and discussed. Experimental studies on spalling behaviour of elements were carried out on seven different concrete mixes with constant content of cement paste and mortar. Research aimed at determining influence of the following parameters: w/c ratio (0.30; 0.45; 0.60), cement type (CEM I, CEM III) and type of aggregates (riverbed gravel, granite, basalt) on fire concrete spalling. Paper discusses also the influence of cold rim that forms while testing slab-like element is subjected to one-side heating