Optimal Trajectory Tracking for an Autonomous UAV

The aim of the present project is the design of optimal flight trajectories for an automomous aerial vehicle which is expected to reach the desired locations in the operational environment expressed in terms of planned waypoints. The navigation must be performed with the vehicle's best effort, i.e. with the lowest cost. Hence, we want to minimize the input energy, a function of the inputs for the mathematical model which describes the dynamics of the vehicle. The trajectory must satisfy all the constraints and pass through all the planned waypoints. Assuming the vehicle as a point mass model, the best solution has been investigated through a genetic algorithm search procedure. The optimisation problem has been solved by modifying a micro-genetic algorithm software which was initially developed by D.L. Carroll. Between all the possible trajectories we select the more "realistic" connections among the waypoints. First of all, we have left out the trajectories with discontinuity in the derivatives as these are not feasible by the real aircraft. The polynomial spline is a suitable candidate to solve our problem. The algorithm splits the trajectory in sub-trajectories which join a sequence of three waypoints. Starting from the first three waypoints, the following sub-trajectories are superimposed keeping the first waypoint coincident with the last of the previous sub-trajectory. The sequence of polynomials is initialized assuming that jumps in the direction of flight are avoided pointing the heading angle in the presumed direction of flight. The optimal trajectory is a trade-off amongst three factors: the required energy cost, the minimum distance from the required waypoint and the feasibility of the trajectory. Results obtained with this optimization procedure are presente

Safety Assessment for Light Remotely Piloted Aircraft Systems

The aim of this paper is the presentation of a novel methodology for risk assessment applied to different RPAS with a MTOM lower than 25 kg, also including lighter-than-air configurations. This methodology concerns with ground impacts and does not cover the aspects of mid-air collisions. The results of this analysis provide a comprehensive insight for mission feasibility and operational implications in a set of realistic application cases. Practical solutions are proposed for risk mitigation of RPAS operations enforcing a concept of general validity, also compliant with forthcoming common EU regulations, applicable at continental level

Optimal Trajectory Tracking for an Autonomous UAV

The aim of the present project is the design of optimal flight trajectories for an automomous aerial vehicle which is expected to reach the desired locations in the operational environment expressed in terms of planned waypoints. The navigation must be performed with the vehicle’s best effort, i.e. with the lowest cost. Hence, we want to minimize the input energy, a function of the inputs for the mathematical model which describes the dynamics of the vehicle. The trajectory must satisfy all the constraints and pass through all the planned waypoints. Assuming the vehicle as a point mass model, the best solution has been investigated through a genetic algorithm search procedure. The optimisation problem has been solved by modifying a micro-genetic algorithm software which was initially developed by D.L. Carroll. Between all the possible trajectories we select the more “realistic” connections among the waypoints. First of all, we have left out the trajectories with discontinuity in the derivatives as these are not feasible by the real aircraft. The polynomial spline is a suitable candidate to solve our problem. The algorithm splits the trajectory in sub-trajectories which join a sequence of three waypoints. Starting from the first three waypoints, the following sub-trajectories are superimposed keeping the first waypoint coincident with the last of the previous sub-trajectory. The sequence of polynomials is initialized assuming that jumps in the direction of flight are avoided pointing the heading angle in the presumed direction of flight. The optimal trajectory is a trade-off amongst three factors: the required energy cost, the minimum distance from the required waypoint and the feasibility of the trajectory. Results obtained with this optimization procedure are presented

A Comprehensive Robust Adaptive Controller for Gust Load Alleviation

The objective of this paper is the implementation and validation of an adaptive controller for aircraft gust load alleviation. The contribution of this paper is the design of a robust controller that guarantees the reduction of the gust loads, even when the nominal conditions change. Some preliminary results are presented, considering the symmetric aileron deflection as control device. The proposed approach is validated on subsonic transport aircraft for different mass and flight conditions. Moreover, if the controller parameters are tuned for a specific gust model, even if the gust frequency changes, no parameter retuning is required

Functional impairment in patients with myotonic dystrophy type 1 can be assessed by an ataxia rating scale (SARA)

Myotonic dystrophy type 1 (DM1) is not characterised by ataxia per se; however, DM1 and ataxia patients show similar disturbances in movement coordination often experiencing walking and balance difficulties, although caused by different underlying pathologies. This study aims to investigate the use of a scale previously described for the assessment and rating of ataxia (SARA) with the hypothesis that it could have utility in DM1 patients as a measure of disease severity and risk of falling. Data from 54 DM1 patients were pulled from the PHENO-DM1 natural history study for analysis. Mean SARA score in the DM1 population was 5.45 relative to the maximum score of eight. A flooring effect (score 0) was observed in mild cases within the sample. Inter-rater and test–retest reliability was high with intraclass coefficients (ICC) of 0.983 and 1.00, respectively. Internal consistency was acceptable as indicated by a Cronbach’s alpha of 0.761. Component analysis revealed two principle components. SARA correlated with: (1) all measures of muscle function tested, including quantitative muscle testing of ankle dorsiflexion (r = −0.584*), the 6 min walk test (r = −0.739*), 10 m walk test (r = 0.741*), and the nine hole peg test (r = 0.602*) and (2) measures of disease severity/burden, such as MIRS (r = 0.718*), MDHI (r = 0.483*), and DM1-Activ (r = −0.749*) (*p < 0.001). The SARA score was predicted by an interaction between modal CTG repeat length and age at sampling (r = 0.678, p = 0.003). A score of eight or above predicted the use of a walking aid with a sensitivity of 100% and a specificity of 85.7%. We suggest that further research is warranted to ascertain whether SARA or components of SARA are useful outcome measures for clinical trials in DM1. As a tool, it can be used for gathering information about disease severity/burden and helping to identify patients in need of a walking aid, and can potentially be applied in both research and healthcare settings

Voluntary Pilot Action Through Biodynamics for Helicopter Flight Dynamics Simulation

This work presents the integration of detailed models of a pilot controlling a helicopter along the heave axis through the collective control inceptor. The action on the control inceptor is produced through a biomechanical model of the pilot’s limbs, by commanding the activation of the related muscle bundles. Such activation, in turn, is determined by defining the muscle elongations required to move the control inceptor in order to obtain the control of the vehicle according to a high-level model of the voluntary action of the pilot acting as a regulator for the vehicle. The biomechanical model of the pilot’s limbs and the aeromechanical model of the helicopter are implemented in a general-purpose multibody simulation. The helicopter model, the biomechanical model of the pilot’s limbs, the cognitive model of the pilot, and their integration are discussed. The integrated model is applied to the simulation of simple, yet representative, mission task elements

Numerical Analysis and Wind Tunnel Validation of Droplet Distribution in the Wake of an Unmanned Aerial Spraying System in Forward Flight

Recent developments in agriculture mechanization have generated significant challenges towards sustainable approaches to reduce the environmental footprint and improve food quality. This paper highlights the benefits of using unmanned aerial systems (UASs) for precision spraying applications of pesticides, reducing the environmental risk and waste caused by spray drift. Several unmanned aerial spraying system (UASS) operation parameters and spray system designs are examined to define adequate configurations for specific treatments. A hexarotor DJI Matrice 600 equipped with T-Motor “15 × 5” carbon fiber blades is tested numerically using computational fluid dynamics (CFD) and experimentally in a wind tunnel. These tests assess the aerodynamic interaction between the wake of an advancing multicopter and the fine droplets generated by atomizers traditionally used in agricultural applications. The aim of this research is twofold. First, we analyze the effects of parameters such as flight speed (0, 2, and 3 m·s (Formula presented.)), nozzle type (hollowcone and fan), and injection pressure (2–3 bar) on spray distribution. In the second phase, we use data from the experimental campaign to validate numerical tools for the simulation of rotor–droplet interactions necessary to predict spray’s ground footprint and to plan a precise guidance algorithm to achieve on-target deposition and reduce the well-known droplet drift problem

Preliminary Design of a Remotely Piloted Aircraft System for Crop-Spraying on Vineyards

This paper describes the preliminary design of an innovative concept rotary-wing Unmanned Aircraft System (UAS) for precision agriculture and aerial spraying applications. Aerial spraying of plant protection products and pesticides shows open challenges in terms of performance and regulatory requirements. In particular*the focus here is on highlighting the advantages of the proposed solution in performing precise and expeditious interventions, coping with the spray drift problem (i.e. minimization of drift). Flight performances and agronomists' requirements are combined to define the mission and the aerial vehicle and spray system design

Mission Planning for the Estimation of the Field Coverage of Unmanned Aerial Systems in Monitoring Mission in Precision Farming

In the recent years, Unmanned Aerial Systems (UAS) have been largely employed in civil applications, such as aerial photography and topographic mapping, environmental monitoring, search and rescue, prevent of fires and disasters, environmental research and general photography and videos. Nevertheless, according to (AUVSI, 2013), agriculture is the main application where UAS will be employed in the near future. Small Unmanned Aerial Vehicles (UAVs) are flexible, easy to use and relative low-cost; thus, they can be employed in monitoring activities in precision farming, ensuring a prompt reaction to plant disease, lack of plants nutrients and environmental changes that are the main focus for farm efficiency and productivity. Recent development in high-resolution remote sensing and image processing technology has yield to small- size sensors compatible with small UAV payload weight. Each kind of sensor needs a certain flight pattern over the fields. However, a Remotely Piloted Aircraft Systems (RPAS) used for specialized operations or experimental activities has to be compliant with National Civil Aviation Authority regulations. On 2015, the Italian Aviation Authority (ENAC) published the second edition of the regulatory issue for this kind of aircrafts. The aim of this paper is the management analysis of RPAS for their use in survey missions for precision faming, taking into account the Italian regulatory prescription and two different kind of commercial sensors. UAVs are considered similarly to any other farm machine, describing the operative workflow and analysing the elementary time procedures associated to the different ways of planning a flight mission of the UAS on the field to be monitored. Actual rates of works, Effective Field Capacity (EFC) and Field Efficiency (FE), field coverage and survey cost are finally provided. The analysis includes also in-field pre-flight calibration procedures