Smart coatings of epoxy based CNTs designed to meet practical expectations in aeronautics

A smart coating exhibiting self-diagnostic capability is designed to meet industrial requirements in aeronautics. The coating made of epoxy-based carbon nanotubes (CNTs) has been applied on industrial Carbon Fiber Reinforced Plastics (CFRPs) currently employed in aeronautics. The correlations between mechanical strain and electrical properties of coated CFRPs highlights the feasibility in manufacturing CFRPs having integrated high sensitivity in providing an effective real-time structural health monitoring. The reliability of the developed CFRPs, in the normal operational temperature range of aircrafts, opens new perspectives in the field of self-responsive structures in aeronautics. Self-responsive panels can simultaneously act as sensor and structural element

Amoxicillin in water: Insights into relative reactivity, byproduct formation, and toxicological interactions during chlorination

In recent years, many studies have highlighted the consistent finding of amoxicillin in waters destined for wastewater treatment plants, in addition to superficial waters of rivers and lakes in both Europe and North America. In this paper, the amoxicillin degradation pathway was investigated by simulating the chlorination process normally used in a wastewater treatment plant to reduce similar emerging pollutants at three different pH values. The structures of 16 isolated degradation byproducts (DPs), one of which was isolated for the first time, were separated on a C-18 column via a gradient HPLC method. Combining mass spectrometry and nuclear magnetic resonance, we then compared commercial standards and justified a proposed formation mechanism beginning from the parent drug. Microbial growth inhibition bioassays with Escherichia coli, Klebsiella pneumoniae, and Staphylococcus aureus were performed to determine the potential loss of antibacterial activity in isolated degradation byproducts. An increase of antibacterial activity in the DPs was observed compared to the parent compound

Complete characterization of degradation byproducts of olmesartan acid, degradation pathway, and ecotoxicity assessment

Antihypertensive drugs are among the most prescribed drugs. Olmesartan acid, of the sartan class, belongs to a relatively new generation of antihypertensive drugs called angiotensin II receptor blockers. There are very few studies on the presence and fate of sartans in the environment, despite them being marketed in huge quantities, metabolized in low percentages, and detected in wastewater and water bodies. This paper presents a study on the less abundant and more polar fractions that have been neglected in previous studies, which led to the isolation by chromatographic methods of thirteen degradation byproducts (DPs), six of which are new, identified by nuclear magnetic resonance and mass spectrometry. A mechanism of degradation from the parent drug was proposed. The ecotoxicity of olmesartan acid and identified compounds was evaluated in Aliivibrio fischeri bacteria and Raphidocelis subcapitata algae to assess acute and chronic toxicity. For 75% of the DPs, acute and chronic exposure to the compounds, at concentrations of 5 mg/L, inhibited population growth in the algae and decreased bioluminescence in the bacteria

Secondary effects of hypochlorite treatment on the emerging pollutant candesartan: The formation of degradation byproducts and their toxicological profiles

In recent years, many studies have reported the frequent detection of antihypertensive agents such as sartans (olmesartan, valsartan, irbesartan and candesartan) in the influents and effluents of wastewater treatment plants (WWTPs) and in the superficial waters of rivers and lakes in both Europe and North America. In this paper, the degradation pathway for candesartan (CAN) was investigated by simulating the chlorination process that is normally used to reduce microbial contamination in a WWTP. Twelve isolated degradation byproducts (DPs), four of which were isolated for the first time, were separated on a C-18 column by employing a gradient HPLC method, and their structures were identified by combining nuclear magnetic resonance and mass spectrometry and comparing the results with commercial standards. On the basis of these results, a mechanism of formation starting from the parent drug is proposed. The ecotoxicity of CAN and its DPs was studied by conducting a battery of ecotoxicity tests; bioassays were performed using Aliivibrio fischeri (bacterium), Daphnia magna (planktonic crustacean) and Raphidocelis subcapitata (alga). The ecotoxicity results shed new light on the increased toxicity of DPs compared with the parent compound

Lc and nmr studies for identification and characterization of degradation byproducts of olmesartan acid, elucidation of their degradation pathway and ecotoxicity assessment

The discovery of various sartans, which are among the most used antihypertensive drugs in the world, is increasingly frequent not only in wastewater but also in surface water and, in some cases, even in drinking or groundwater. In this paper, the degradation pathway of olmesartan acid, one of the most used sartans, was investigated by simulating the chlorination process normally used in a wastewater treatment plant to reduce similar emerging pollutants. The structures of nine isolated degradation byproducts (DPs), eight of which were isolated for the first time, were separated via chromatography column and HPLC methods, identified by combining nuclear magnetic resonance and mass spectrometry, and justified by a proposed mechanism of formation beginning from the parent drug. Ecotoxicity tests on olmesartan acid and its nine DPs showed that 50% of the investigated byproducts inhibited the target species Aliivibrio fischeri and Raphidocelis subcapitata, causing functional decreases of 18% and 53%, respectively

Octocrylene: From Sunscreens to the Degradation Pathway during Chlorination Processes: Formation of Byproducts and Their Ecotoxicity Assessment

Octocrylene is an organic sunscreen whose main action is to absorb UVB radiation and short UVA wavelengths; it is used in various cosmetic products in order to provide an adequate sun-protection factor or to protect the cosmetic formulations themselves from UV radiation. This filter is believed to be a possible endocrine disruptor and is also questioned due to its allergic and/or photoallergic potential. However, it continues to be widely used, and it has been found in various environments, not least those of swimming pools, where it is evidently released by consumers, to the point that it is now considered an emerging micropollutant. The present investigation presents the possible chemical fate of octocrylene in the typical chlorination conditions of wastewater or swimming pools. A total of 11 disinfection byproducts were identified, and 6 were identified for the first time, and separated by HPLC. These products were identified through careful mass spectrometry studies and 1D and 2D NMR experiments. A formation mechanism has been proposed that justifies the chemical structures of all of the compounds identified. The ecotoxicological assessment of octocrylene and their products was carried out by employing Phaeodactylum tricornutum, Brachionus plicatilis and Aliivibrio fischeri as bioindicators. The ecotoxicity results reveal that toxic byproducts might be generated during the oxidation process, increasing the potential risk to the marine environment

Phosphodiester Silybin Dimers Powerful Radical Scavengers: A Antiproliferative Activity on Different Cancer Cell Lines

Silibinin is the main biologically active component of silymarin extract and consists of a mixture 1:1 of two diastereoisomeric flavonolignans, namely silybin A (1a) and silybin B (1b), which we call here silybins. Despite the high interest in the activity of this flavonolignan, there are still few studies that give due attention to the role of its stereochemistry and, there is still today a strong need to investigate in this area. In this regard, here we report a study concerning the radical scavenger ability and the antiproliferative activity on different cell lines, both of silybins and phosphodiester-linked silybin dimers. An efficient synthetic strategy to obtain silybin dimers in an optical pure form (6aa, 6ab and 6bb) starting from a suitable building block of silybin A and silybin B, obtained by us from natural extract silibinin, was proposed. New dimers show strong antioxidant properties, determined through hydroxyl radical (HO°) scavenging ability, comparable to the value reported for known potent antioxidants such as quercetin. A preliminary screening was performed by treating cells with 10 and 50 µM concentrations for 48 h to identify the most sensitive cell lines. The results show that silibinin compounds were active on Jurkat, A375, WM266, and HeLa, but at the tested concentrations, they did not interfere with the growth of PANC, MCF-7, HDF or U87. In particular, both monomers (1a and 1b) and dimers (6aa, 6ab and 6bb) present selective anti-proliferative activity towards leukemia cells in the mid-micromolar range and are poorly active on normal cells. They exhibit different mechanisms of action in fact all the cells treated with the 1a and 1b go completely into apoptosis, whereas only part of the cells treated with 6aa and 6ab were found to be in apoptosis

A customized knee antibiotic-loaded pmma spacer: A preliminary design analysis

A preliminary design of customized antibiotic-loaded poly-methyl-methacrylate (ALP-MMA) spacer characterized by an appropriate footprint according to the specific patient’s anatomy and a reliable mechanical response to severe functional loads (i.e., level walking and 45◦ bent knee) is reported. The targeted virtual prototyping process takes origin from a novel patented 3D geometrical conceptualization characterized by added customization features and it is validated by a preliminary FEM-based analysis. Mechanical and thermomechanical properties of the antibiotic-doped orthopedic PMMA cement, which will be used for the future prototype manufacturing, were measured experimentally by testing samples taken during a real day-running orthopedic surgery and manufactured according to the surgeon protocol. FEM analysis results indicate that small area is subjected to intensive stresses, validating the proposed geometry from the mechanical point of view, under the two loading scenarios, moreover the value of safety margins results positive, and this is representa-tive of the lower stress magnitude compared to the critical material limits. The experimental data confirm that the presence of antibiotic will last during the surgeon period moreover, the temperature dependent modulus of the bone cement is slightly affected by the body range temperature whereas it will drastically drop for higher temperature out the range of interest. A complete customization, according to a patient anatomy, and the corresponding real prototype spacer will be manufactured by 3D printing techniques, and it will be validated by destructive testing during the second stage of this activity before commercialization

Cytotoxicity of an innovative pressurised cyclic solid–liquid (Pcsl) extract from artemisia annua

Therapeutic treatments with Artemisia annua have a long-established tradition in various diseases due to its antibacterial, antioxidant, antiviral, anti-malaria and anti-cancer effects. However, in relation to the latter, virtually all reports focused on toxic effects of A. annua extracts were obtained mostly through conventional maceration methods. In the present study, an innovative extraction procedure from A. annua, based on pressurised cyclic solid–liquid (PCSL) extraction, resulted in the production of a new phytocomplex with enhanced anti-cancer properties. This extraction procedure generated a pressure gradient due to compressions and following decompressions, allowing to directly perform the extraction without any maceration. The toxic effects of A. annua PCSL extract were tested on different cells, including three cancer cell lines. The results of this study clearly indicate that the exposure of human, murine and canine cancer cells to serial dilutions of PCSL extract resulted in higher toxicity and stronger propensity to induce apoptosis than that detected by subjecting the same cells to Artemisia extracts obtained through canonical extraction by maceration. Collected data suggest that PCSL extract of A. annua could be a promising and economic new therapeutic tool to treat human and animal tumours

On the necessity of a customized knee spacer in peri-prosthetic joint infection treatment: 3d numerical simulation results

Peri-prosthetic joint infections (PJIs) dramatically affect human health, as they are associated with high morbidity and mortality rates. Two-stage revision arthroplasty is currently the gold standard treatment for PJI and consists of infected implant removal, an accurate debridement, and placement of antimicrobial impregnated poly-methyl-metha-acrylate (PMMA) spacer. The use of antibiotic-loaded PMMA (ALPMMA) spacers have showed a success rate that ranges from 85% to 100%. ALPMMA spacers, currently available on the market, demonstrate a series of disadvantages, closely linked to a low propensity to customize, seen as the ability to adapt to the patients’ anatomical characteristics, with consequential increase of surgical complexity, surgery duration, and postoperative complications. Conventionally, ALPMMA spacers are available only in three or four standard sizes, with the impossibility of guaranteeing the perfect matching of ALPMMA spacers with residual bone (no further bone loss) and gap filling. In this paper, a 3D model of an ALPMMA spacer is introduced to evaluate the cause-effect link between the geometric characteristics and the correlated clinical improvements. The result is a multivariable-oriented design able to effectively manage the size, alignment, stability, and the patients’ anatomical matching. The preliminary numerical results, obtained by using an “ad hoc” 3D virtual planning simulator, clearly point out that to restore the joint line, the mechanical and rotational alignment and the surgeon’s control on the thicknesses (distal and posterior thicknesses) of the ALPMMA spacer is mandatory. The numerical simulations campaign involved nineteen patients grouped in three different scenarios (Case N◦ 1, Case N◦ 2 and Case N◦ 3) whose 3D bone models were obtained through an appropriate data management strategy. Each scenario is characterized by a different incidence rate. In particular, the observed rates of occurrence are, respectively, equal to 17% (Case N◦ 1), 74% (Case N◦ 2), and 10% (Case N◦ 3)