Manometric monitoring of biological denitrification

A simple, automated manometric method is here discussed and applied to perform batch experiments for the stoichiometric and kinetic characterization of biological denitrification. The main strength of the proposed methodology is that it requires simple instrumentation, which is usually available in wastewater treatment plant laboratories, being it used in BOD and in BMP tests. The experimental setup consists of a glass bottle, a mixing and termostated system and a manometric bottle-head which can measure and log the overpressure that is caused by denitrified N2. At first, tests were conducted to determine the repeatability of the method; they were performed under low Food-to-Biomass ratio and with both endogenous and externally dosed carbon sources. Later, experimental procedures were performed to assess (1) the anoxic growth yield, (2) the endogenous anoxic decay rate; (3) the anoxic growth rate on acetate; (4) the fraction of anoxic active biomass in the sludge sample. Sludge samples for all these tests were taken from two WWTPs and 6 to 10 replicates were performed each time. Results indicated that the testing procedures is well repeatable and reliable and resulting estimates were within reported literature values

Optimizing resource recovery from wastewater with algae-bacteria membrane reactors

Exploiting the combination of algae and bacteria in High Rate Algal/Bacterial Ponds (HRABP) is an emerging approach for wastewater remediation and resource recovery. In this study, the advantage of adding a solid/liquid separation system to uncouple Hydraulic Retention Time (HRT) and Solid Retention Time (SRT) is explored and quantified. A long-term validated model for HRABP was run to simulate and optimize a system at large scale treating digestate. It is shown that by uncoupling HRT and SRT, adapting the liquid depth and the alkalinity content, the algae productivity increases from 9.0 to 14.5 g m(-2) d(-1) (for HRT = SRT in the range of 5 to 10 days) to 20.3 g m(-2) d(-1) (for HRT = 0.2 d and SRT = 2 d). Simulations pointed out that maximizing the algal pro-ductivity or the fraction of recovered nitrogen in the algal biomass are conflicting goals that are achieved under different operating conditions. Conditions maximising the algal productivity favour algae and heterotrophic bacteria while algae and nitrifying bacteria dominate the system under those conditions optimizing the efficiency of nitrogen recycling. Finally, increasing the influent alkalinity and adapting the water depth can boost the algal productivity without meeting conditions favourable to N2O emission, opening new perspectives for resource recovery through algal biomass valorisation

Treatability of digested piggery/poultry manure by anammox bacteria

The liquid fraction of digested material is rich in ammonium and may require nitrogen removal. The aim of this research was to evaluate the applicability of the anammox process for the biological N removal from a supernatant coming from the anaerobic digestion of a mixture of piggery manure, poultry manure, and of agro-wastes. The supernatant was pre-treated in a partial nitritation pilot-scale reactor located at the farm. A batch procedure for testing the short term effect of high-strength wastewaters on anammox activity is presented. The anammox process was successfully applied for the first time to undiluted digestate, and the average N removal efficiency achieved during 350 days of experimentation in a SBR lab-scale reactor was 91%

LCA of Zero Valent Iron Nanoparticles Encapsulated in Algal Biomass for Polishing Treated Effluents

Research data produced within the CARIPLO IMAP and Perform Water 2030 projects were processed using the SimaPro software to carry out the Life Cycle Assessment according to ISO 14040-44 of an innovative process of treated effluents' polishing. The study aims to evaluate the integration of a microalgae culture as a side-stream process into the baseline layout of a wastewater treatment plant to remove nitrogen from the supernatant of sludge centrifugation from an environmental perspective. In particular, the investigated system focuses on using the algal biomass produced as an organic matrix for encapsulating zero-valent iron nanoparticles to be used for the final refinement of the effluent. Zero-valent iron (ZVI) is a reactive metal and an effective reducing agent. It can be used to remove organic and inorganic pollutants (e.g., chlorinated organics, pharmaceuticals, metals, textile dyestuffs). The encapsulation of ZVI by hydrothermal carbonization (HTC) in a carbonaceous matrix allows for overcoming the problems related to its lack of stability, easy aggregation, and difficulty in separating the ZVI nanoparticles from the treated solution. The case study refers to Bresso wastewater treatment plant (Milan province, Northern Italy). The environmental performances of the study were assessed following the Life Cycle Impact Assessment methods IMPACT 2002+. According to the results, the new process integration does not affect the environmental performance of the WWTP, still implying a significant improvement in the removal of metals and micropollutants. In fact, due to the ability of ZVI nanoparticles to remove organic and inorganic pollutants, the outflowing load will be significantly reduced, which will improve the environmental performance of the entire Bresso wastewater treatment plant

First Results on the Removal of Emerging Micropollutants from Municipal Centrate by Microalgae

The results of a first campaign of sampling and analyses of emerging micropollutants in the influent (municipal centrate) and effluent of a pilot MBP raceway are reported. The algal population was chiefly made of Chlorella spp. and the pilot worked satisfactorily for the removal of nitrogen. 14 emerging micropollutants were analysed. Average removal efficiencies exceeding 80 % were observed for diclofenac, lamotrigine, ketoprofene, clarithromycin. For such compounds the variability of removal efficiency was also reduced, with respect to the other tested molecules, and was particularly low for diclofenac and lamotrigine. Removal efficiencies over 50 % were measured for azithromycin, metoprolol and irbesartan but with strong variability. Lower removal efficiencies were observed for amisulpride and 5-methylbenzotriazole, while for the remaining compounds the concentrations in the effluent were higher than in the influent

Microalgal cultivation on digestate: Process efficiency and economics

This study aims at evaluating the process efficiency of an outdoor pilot-scale microalgae-based wastewater treatment system. Experimental results from two monitoring campaigns were analysed, showing that the system removed on average 85.1 % and 36.2 % of the influent ammoniacal nitrogen and orthophosphate, respectively, with an associated algal productivity of 9.5 g TSS center dot m(-2)center dot d(-1). Based on pilot-scale results, a comprehensive technoeconomic assessment was performed, allowing to calculate a biomass production cost of 4.3 euro center dot kg TSS-1 and a wastewater treatment cost of 2.7 euro center dot m(-3) (corresponding to a nitrogen removal cost of 12.5 euro center dot kg N-1). These costs turned out to be comparable with conventional wastewater treatment processes, thus recognizing the potential of microalgae cultivation on wastewaters as feasible alternative to conventional energy-demanding bioremediation systems and to expensive algal cultivation processes. A sensitivity and scenario analysis indicated that, under the most optimistic condition (20 % increase in the productivity, and 20 % OPEX and CAPEX reduction), biomass production and nitrogen removal costs could be further reduced of approximately 44 %

Respirometric assessment of bacterial kinetics in algae-bacteria and activated sludge processes

Algae-bacteria (AB) consortia can be exploited for effective wastewater treatment, based on photosynthetic oxygenation to reduce energy requirements for aeration. While algal kinetics have been extensively evaluated, bacterial kinetics in AB systems are still based on parameters taken from the activated sludge models, lacking an experimental validation for AB consortia. A respirometric procedure was therefore proposed, to estimate bacterial kinetics in both activated sludge and AB, under different conditions of temperature, pH, dissolved oxygen, and substrate availability. Bacterial activities were differently influenced by operational/environmental conditions, suggesting that the adoption of typical activated sludge parameters could be inadequate for AB modelling. Indeed, respirometric results show that bacteria in AB consortia were adapted to a wider range of conditions, compared to activated sludge, confirming that a dedicated calibration of bacterial kinetics is essential for effectively modelling AB systems, and respirometry was proven to be a powerful and reliable tool to this purpose

Computational Integration of Homolog and Pathway Gene Module Expression Reveals General Stemness Signatures

The stemness hypothesis states that all stem cells use common mechanisms to regulate self-renewal and multi-lineage potential. However, gene expression meta-analyses at the single gene level have failed to identify a significant number of genes selectively expressed by a broad range of stem cell types. We hypothesized that stemness may be regulated by modules of homologs. While the expression of any single gene within a module may vary from one stem cell type to the next, it is possible that the expression of the module as a whole is required so that the expression of different, yet functionally-synonymous, homologs is needed in different stem cells. Thus, we developed a computational method to test for stem cell-specific gene expression patterns from a comprehensive collection of 49 murine datasets covering 12 different stem cell types. We identified 40 individual genes and 224 stemness modules with reproducible and specific up-regulation across multiple stem cell types. The stemness modules included families regulating chromatin remodeling, DNA repair, and Wnt signaling. Strikingly, the majority of modules represent evolutionarily related homologs. Moreover, a score based on the discovered modules could accurately distinguish stem cell-like populations from other cell types in both normal and cancer tissues. This scoring system revealed that both mouse and human metastatic populations exhibit higher stemness indices than non-metastatic populations, providing further evidence for a stem cell-driven component underlying the transformation to metastatic disease

Towards a standardization of biomethane potential tests

8 PáginasProduction of biogas from different organic materials is a most interesting source of renewable energy. The biomethane potential (BMP) of these materials has to be determined to get insight in design parameters for anaerobic digesters. A workshop was held in June 2015 in Leysin Switzerland to agree on common solutions to the conundrum of inconsistent BMP test results. A discussion covers actions and criteria that are considered compulsory ito accept and validate a BMP test result; and recommendations concerning the inoculum substrate test setup and data analysis and reporting ito obtain test results that can be validated and reproduced.The workshop in Leysin, Switzerland, has been financed by the Swiss Federal Office for Energy, and co-sponsored by Bioprocess Control Sweden AB, Lund, Sweden. The authors thank Alexandra Maria Murray for editing the English