Fine-Tuning of the Excitonic Response in Monolayer WS2 Domes via Coupled Pressure and Strain Variation

We present a spectroscopic investigation into the vibrational and optoelectronic properties of WS2 domes in the 0-0.65 GPa range. The pressure evolution of the system morphology, deduced by the combined analysis of Raman and photoluminescence spectra, revealed a significant variation in the dome's aspect ratio. The modification of the dome shape caused major changes in the mechanical properties of the system resulting in a sizable increase of the out-of-plane compressive strain while keeping the in-plane tensile strain unchanged. The variation of the strain gradients drives a non-linear behavior in both the exciton energy and radiative recombination intensity, interpreted as the consequence of a hybridization mechanism between the electronic states of two distinct minima in the conduction band. Our results indicate that pressure and strain can be efficiently combined in low dimensional systems with unconventional morphology to obtain modulations of the electronic band structure not achievable in planar crystals.Comment: 11 pages, 4 figure

Proton-driven patterning of bulk transition metal dichalcogenides

At the few-atom-thick limit, transition metal dichalcogenides (TMDs) exhibit a host of attractive electronic optical, and structural properties. The possibility to pattern these properties has a great impact on applied and fundamental research. Here, we demonstrate spatial control over the light emission, lattice deformation, and hydrogen storage in bulk TMDs. By low-energy proton irradiation, we create uniquely favorable conditions for the production and accumulation of molecular hydrogen just one or few monolayers beneath the crystal basal plane of bulk WS2, WSe2, WTe2, MoSe2, and MoS2 samples. H2 therein produced coalesces to form bubbles, which lead to the localized swelling of one X-M-X plane prevalently. This results eventually in the creation of atomically thin domes filled with molecular hydrogen at 10 atm. The domes emit light strongly well above room temperature and can store H2 indefinitely. They can be produced with the desired density, well-ordered positions, and size tunable from the nanometer to the micrometer scale, thus providing a template for the manageable and durable mechanical and electronic structuring of two-dimensional materials

The Interaction of Hydrogen with the van der Waals Crystal γ-InSe

The emergence of the hydrogen economy requires development in the storage, generation and sensing of hydrogen. The indium selenide (γ-InSe) van der Waals (vdW) crystal shows promise for technologies in all three of these areas. For these applications to be realised, the fundamental interactions of InSe with hydrogen must be understood. Here, we present a comprehensive experimental and theoretical study on the interaction of γ-InSe with hydrogen. It is shown that hydrogenation of γ-InSe by a Kaufman ion source results in a marked quenching of the room temperature photoluminescence signal and a modification of the vibrational modes of γ-InSe, which are modelled by density functional theory simulations. Our experimental and theoretical studies indicate that hydrogen is incorporated into the crystal preferentially in its atomic form. This behaviour is qualitatively different from that observed in other vdW crystals, such as transition metal dichalcogenides, where molecular hydrogen is intercalated in the vdW gaps of the crystal, leading to the formation of "bubbles" for hydrogen storage

Synthesis, structure, and characterization of 4,4′-(Anthracene-9,10-diylbis(ethyne-2,1-diyl))bis(1-methyl-1-pyridinium) Bismuth Iodide (C30H22N2)3Bi4I18, an air, water, and thermally stable 0D hybrid Perovskite with high photoluminescence ffficiency

4,4'-(Anthracene-9,10-diylbis(ethyne-2,1-diyl))bis(1-methyl-1-pyridinium) bismuth iodide (C30H22N2)3Bi4I18 (AEPyBiI) was obtained as a black powder by a very simple route by mixing an acetone solution of BiI3 and an aqueous solution of C30H22N2I2. This novel perovskite is air and water stable and displays a remarkable thermal stability up to nearly 300 °C. The highly conjugated cation C30H22N2 2+ is hydrolytically stable, being nitrogen atoms quaternarized, and this accounts for the insensitivity of the perovskite toward water and atmospheric oxygen under ambient conditions. The cation in aqueous solution is highly fluorescent under UV irradiation (emitting yellow-orange light). AEPyBiI as well is intensely luminescent, its photoluminescence emission being more than 1 order of magnitude greater than that of high-quality InP epilayers. The crystal structure of AEPyBiI was determined using synchrotron radiation single-crystal X-ray diffraction. AEPyBiI was extensively characterized using a wide range of techniques, such as X-ray powder diffraction, diffuse reflectance UV-vis spectroscopy, Fourier transform infrared (FTIR) and Raman spectroscopies, thermogravimetry-differential thermal analysis (TG-DTA), elemental analysis, electrospray ionization mass spectroscopy (ESI-MS), and photoluminescence spectroscopy. AEPyBiI displays a zero-dimensional (0D) perovskite structure in which the inorganic part is constituted by binuclear units consisting of two face-sharing BiI6 octahedra (Bi2I9 3- units). The C30H22N2 2+ cations are stacked along the a-axis direction in a complex motif. Considering its noteworthy light-emitting properties coupled with an easy synthesis and environmental stability, and its composition that does not contain toxic lead or easily oxidable Sn(II), AEPyBiI is a promising candidate for environmentally friendly light-emitting devices

Imaging the Quantum Capacitance of Strained MoS2 Monolayers by Electrostatic Force Microscopy

We implemented radio frequency-assisted electrostatic force microscopy (RF-EFM) to investigate the electric field response of biaxially strained molybdenum disulfide (MoS2) monolayers (MLs) in the form of mesoscopic bubbles, produced via hydrogen (H)-ion irradiation of the bulk crystal. MoS2 ML, a semiconducting transition metal dichalcogenide, has recently attracted significant attention due to its promising optoelectronic properties, further tunable by strain. Here, we take advantage of the RF excitation to distinguish the intrinsic quantum capacitance of the strained ML from that due to atomic scale defects, presumably sulfur vacancies or H-passivated sulfur vacancies. In fact, at frequencies fRF larger than the inverse defect trapping time, the defect contribution to the total capacitance and to transport is negligible. Using RF-EFM at fRF = 300 MHz, we visualize simultaneously the bubble topography and its quantum capacitance. Our finite-frequency capacitance imaging technique is non-invasive and nanoscale, and can contribute to the investigation of time and spatial-dependent phenomena, such as the electron compressibility in quantum materials, which are difficult to measure by other methods

Extraordinary second harmonic generation modulated by divergent strain field in pressurized monolayer domes

The most prominent form of nonlinear optical (NLO) frequency conversion is second harmonic generation (SHG), where incident light interacts with a nonlinear medium producing photons at double the input frequency, which has vast applications in material and biomedical science. Emerging two-dimensional nonlinear optical materials led by transition metal dichalcogenides (TMDs) have fascinating optical and mechanical properties and are highly anticipated to overcome the technical limitations imposed by traditional bulky NLO materials. However, the atomic scale interaction length and low conversion efficiency in TMD materials prevent their further implementation in NLO applications. While some uniaxial strain-engineering studies intensively investigated the anisotropic SHG response in TMDs, they did not realize giant SHG enhancement by exploiting the opto-mechanical characteristics. Herein, we employ proton (H+) irradiation to successfully fabricate large pressurized monolayer TMD domes (d ≥ 10 μm) and conduct a comprehensive investigation and characterization of their SHG performance enhancement. We show that the intensity of SHG is effectively enhanced by around two orders of magnitude at room temperature. Such giant enhancement arises from the distinct separation distance induced by capped pressurized gas and the hemi-spherical morphology, enabling constructive optical interference. Moreover, the unique divergent strain field in TMD domes promotes the first experimental study on the anisotropic nonlinear optical behavior based on biaxial strain conditions in terms of varying strain orientation and relative weights. Our work demonstrates a promising system with enhanced NLO performance and well-preserved biocompatibility, paving a way toward the future nano-scaled quantum optics design and biomedical applications

Spectromicroscopy study of induced defects in ion-bombarded highly aligned carbon nanotubes

Highly aligned multi-wall carbon nanotubes were investigated with scanning electron microscopy (SEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after bombardment performed using noble gas ions of different masses (argon, neon and helium), in an ultra-high-vacuum (UHV) environment. Ion irradiation leads to change in morphology, deformation of the carbon (C) honeycomb lattice and different structural defects in multi-wall carbon nanotubes. One of the major effects is the production of bond distortions, as determined by micro-Raman and micro-X-ray photoelectron spectroscopy. We observe an increase in sp3 distorted bonds at higher binding energy with respect to the expected sp2 associated signal of the carbon 1s core level, and increase in dangling bonds. Furthermore, the surface damage as determined by the X-ray photoelectron spectroscopy carbon 1s core level is equivalent upon bombarding with ions of different masses, while the impact and density of defects in the lattice of the MWCNTs as determined by micro-Raman are dependent on the bombarding ion mass; heavier for helium ions, lighter for argon ions. These results on the controlled increase in sp3 distorted bonds, as created on the multi-wall carbon nanotubes, open new functionalization prospects to improve and increase atomic hydrogen uptake on ion-bombarded multi-wall carbon nanotubes

Localisation-to-delocalisation transition of moir\'{e} excitons in WSe2_2/MoSe2_2 heterostructures

Moir\'{e} excitons (MXs) are electron-hole pairs localised by the periodic (moir\'{e}) potential forming in two-dimensional heterostructures (HSs). MXs can be exploited, $e.g.$, for creating nanoscale-ordered quantum emitters and achieving or probing strongly correlated electronic phases at relatively high temperatures. Here, we studied the exciton properties of a WSe$_2$/MoSe$_2$ HS from $T$=6 K to room temperature using time-resolved and continuous-wave micro-photoluminescence, also under magnetic field. The exciton dynamics and emission lineshape evolution with temperature show clear signatures that MXs de-trap from the moir\'{e} potential and turn into free interlayer excitons (IXs) at $T\gtrsim$120 K. The MX-to-IX transition is also apparent from the exciton magnetic moment reversing its sign when the moir\'{e} potential is not capable to localise excitons at elevated temperatures. Concomitantly, the exciton formation and decay times reduce drastically. Thus, our findings establish the conditions for a truly confined nature of the exciton states in a moir\'{e} superlattice with increasing temperature

Excitons and trions in WSSe monolayers

The possibility of almost linear tuning of the band gap and of the electrical and optical properties in monolayers (MLs) of semiconducting transition metal dichalcogenide (S-TMD) alloys opens up the way to fabricate materials with on-demand characteristics. By making use of photoluminescence spectroscopy, we investigate optical properties of WSSe MLs with a S/Se ratio of 57/43 deposited on SiO$_2$/Si substrate and encapsulated in hexagonal BN flakes. Similarly to the $"parent"$ WS$_2$ and WSe$_2$ MLs, we assign the WSSe MLs to the ML family with the dark ground exciton state. We find that, in addition to the neutral bright A exciton line, three observed emission lines are associated with negatively charged excitons. The application of in-plane and out-of-plane magnetic fields allows us to assign undeniably the bright and dark (spin- and momentum-forbidden) negative trions as well as the phonon replica of the dark spin-forbidden complex. Furthermore, the existence of the single photon emitters in the WSSe ML is also demonstrated, thus prompting the opportunity to enlarge the wavelength range for potential future quantum applications of S-TMDs.Comment: 6 pages, 5 figures, +ES