Sonoluminescence as a QED vacuum effect. II: Finite Volume Effects

In a companion paper [quant-ph/9904013] we have investigated several variations of Schwinger's proposed mechanism for sonoluminescence. We demonstrated that any realistic version of Schwinger's mechanism must depend on extremely rapid (femtosecond) changes in refractive index, and discussed ways in which this might be physically plausible. To keep that discussion tractable, the technical computations in that paper were limited to the case of a homogeneous dielectric medium. In this paper we investigate the additional complications introduced by finite-volume effects. The basic physical scenario remains the same, but we now deal with finite spherical bubbles, and so must decompose the electromagnetic field into Spherical Harmonics and Bessel functions. We demonstrate how to set up the formalism for calculating Bogolubov coefficients in the sudden approximation, and show that we qualitatively retain the results previously obtained using the homogeneous-dielectric (infinite volume) approximation.Comment: 23 pages, LaTeX 209, ReV-TeX 3.2, five figure

Magnetic moment of an electron near a surface with dispersion

Boundary-dependent radiative corrections that modify the magnetic moment of an electron near a dielectric or conducting surface are investigated. Normal-mode quantization of the electromagnetic field and perturbation theory applied to the Dirac equation for a charged particle in a weak magnetic field yield a general formula for the magnetic moment correction in terms of any choice of electromagnetic mode functions. For two particular models, a non-dispersive dielectric and an undamped plasma, it is shown that, by using contour integration techniques over a complex wave vector, this can be simplified to a formula featuring just integrals over TE and TM reflection coefficients of the surface. Analysing the magnetic moment correction for several models of surfaces, we obtain markedly different results from the previously considered simplistic 'perfect reflector' model, which is due to the inclusion of physically important features of the surface like evanescent field modes and dispersion in the material. Remarkably, for a general dispersive dielectric surface, the magnetic moment correction of an electron nearby has a peak whose position and height can be tuned by choice of material parameters

Anomalous magnetic moment of an electron near a dispersive surface

Changes in the magnetic moment of an electron near a dielectric or conducting surface due to boundary-dependent radiative corrections are investigated. The electromagnetic field is quantized by normal mode expansion for a nondispersive dielectric and an undamped plasma, but the electron is described by the Dirac equation without matter-field quantization. Perturbation theory in the Dirac equation leads to a general formula for the magnetic-moment shift in terms of integrals over products of electromagnetic mode functions. In each of the models investigated, contour integration techniques over a complex wave vector can be used to derive a general formula featuring just integrals over transverse electric and transverse magnetic reflection coefficients of the surface. Analysis of the magnetic-moment shift for several classes of materials yields markedly different results from the previously considered simplistic “perfect-reflector” model, due to the inclusion of physically important features of the electromagnetic response of the surface such as evanescent field modes and dispersion in the material. For a general dispersive dielectric surface, the magnetic-moment shift of a nearby electron can exceed the previous prediction of the perfect-reflector model by several orders of magnitude

Gauge Theories with Cayley-Klein SO(2;j)SO(2;j) and SO(3;j)SO(3;j) Gauge Groups

Gauge theories with the orthogonal Cayley-Klein gauge groups $SO(2;j)$ and $SO(3;{\bf j})$ are regarded. For nilpotent values of the contraction parameters ${\bf j}$ these groups are isomorphic to the non-semisimple Euclid, Newton, Galilei groups and corresponding matter spaces are fiber spaces with degenerate metrics. It is shown that the contracted gauge field theories describe the same set of fields and particle mass as $SO(2), SO(3)$ gauge theories, if Lagrangians in the base and in the fibers all are taken into account. Such theories based on non-semisimple contracted group provide more simple field interactions as compared with the initial ones.Comment: 14 pages, 5 figure

Sonoluminescence as a QED vacuum effect: Probing Schwinger's proposal

Several years ago Schwinger proposed a physical mechanism for sonoluminescence in terms of photon production due to changes in the properties of the quantum-electrodynamic (QED) vacuum arising from a collapsing dielectric bubble. This mechanism can be re-phrased in terms of the Casimir effect and has recently been the subject of considerable controversy. The present paper probes Schwinger's suggestion in detail: Using the sudden approximation we calculate Bogolubov coefficients relating the QED vacuum in the presence of the expanded bubble to that in the presence of the collapsed bubble. In this way we derive an estimate for the spectrum and total energy emitted. We verify that in the sudden approximation there is an efficient production of photons, and further that the main contribution to this dynamic Casimir effect comes from a volume term, as per Schwinger's original calculation. However, we also demonstrate that the timescales required to implement Schwinger's original suggestion are not physically relevant to sonoluminescence. Although Schwinger was correct in his assertion that changes in the zero-point energy lead to photon production, nevertheless his original model is not appropriate for sonoluminescence. In other works (see quant-ph/9805023, quant-ph/9904013, quant-ph/9904018, quant-ph/9905034) we have developed a variant of Schwinger's model that is compatible with the physically required timescales.Comment: 18 pages, ReV_TeX 3.2, 9 figures. Major revisions: This document is now limited to providing a probe of Schwinger's original suggestion for sonoluminescence. For details on our own variant of Schwinger's ideas see quant-ph/9805023, quant-ph/9904013, quant-ph/9904018, quant-ph/990503

Sonoluminescence as Quantum Vaccum Radiation

We argue that the available experimental data is not compatible with models of sonoluminescence which invoke dynamical properties of the interface without regard to the compositional properties of the trapped gas inside the bubble.Comment: 2 pages,Revtex,No figures,Submitted to PRL(comments

Vortex in a trapped Bose-Einstein condensate with dipole-dipole interactions

We calculate the critical rotation frequency at which a vortex state becomes energetically favorable over the vortex-free ground state in a harmonically trapped Bose-Einstein condensate whose atoms have dipole-dipole interactions as well as the usual s-wave contact interactions. In the Thomas-Fermi (hydrodynamic) regime, dipolar condensates in oblate cylindrical traps (with the dipoles aligned along the axis of symmetry of the trap) tend to have lower critical rotation frequencies than their purely s-wave contact interaction counterparts. The converse is true for dipolar condensates in prolate traps. Quadrupole excitations and centre of mass motion are also briefly discussed as possible competing mechanisms to a vortex as means by which superfluids with partially attractive interactions might carry angular momentumComment: 12 pages, 12 figure

Stress Tensor Correlators in the Schwinger-Keldysh Formalism

We express stress tensor correlators using the Schwinger-Keldysh formalism. The absence of off-diagonal counterterms in this formalism ensures that the +- and -+ correlators are free of primitive divergences. We use dimensional regularization in position space to explicitly check this at one loop order for a massless scalar on a flat space background. We use the same procedure to show that the ++ correlator contains the divergences first computed by `t Hooft and Veltman for the scalar contribution to the graviton self-energy.Comment: 14 pages, LaTeX 2epsilon, no figures, revised for publicatio

Casimir-Polder interaction between an atom and a dielectric slab

We present an explicit analytic calculation of the energy-level shift of an atom in front of a non-dispersive and non-dissipative dielectric slab. We work with the fully quantized electromagnetic field, taking retardation into account. We give the shift as a two-dimensional integral and use asymptotic analysis to find expressions for it in various retarded and non-retarded limiting cases. The results can be used to estimate the energy shift of an atom close to layered microstructures.Comment: 10 pages, incl 7 figure

3D printed fracture reduction guides planned and printed at the point of care show high accuracy - a porcine feasibility study.

PURPOSE After surgical treatment of comminuted diaphyseal femoral and tibial fractures, relevant malalignment, especially rotational errors occur in up to 40-50%. This either results in a poor clinical outcome or requires revision surgery. This study aims to evaluate the accuracy of reduction if surgery is supported by 3D guides planned and printed at the point of care. METHODS Ten porcine legs underwent computed tomography (CT) and 3D models of femur and tibia were built. Reduction guides were virtually constructed and fitted to the proximal and distal metaphysis. The guides were 3D printed using medically approved resin. Femoral and tibial comminuted diaphyseal fractures were simulated and subsequently reduced using the 3D guides. Postoperative 3D bone models were reconstructed to compare the accuracy to the preoperative planning. RESULTS Femoral reduction showed a mean deviation ± SD from the plan of 1.0 mm ± 0.9 mm for length, 0.9° ± 0.7° for varus/valgus, 1.2° ± 0.9° for procurvatum/recurvatum and 2.0° ± 1.7° for rotation. Analysis of the tibial reduction revealed a mean deviation ± SD of 2.4 mm ± 1.6 mm for length, 1.0° ± 0.6° for varus/valgus, 1.3° ± 1.4° for procurvatum/recurvatum and 2.9° ± 2.2° for rotation. CONCLUSIONS This study shows high accuracy of reduction with 3D guides planned and printed at the point of care. Applied to a clinical setting, this technique has the potential to avoid malreduction and consecutive revision surgery in comminuted diaphyseal fractures. LEVEL OF EVIDENCE Basic Science