308 research outputs found
Interdiffused AlGaAs-GaAs quantum well for improved electroabsorptive modulation
This is a theoretical study of the effects of two asgrown structural parameters on the modulation properties of Al xGa 1-xAs-GaAs quantum wells (QW's), which are the Al concentration in barrier and the thickness of the well layer serving as initial conditions before interdiffusion. The results show that, with a larger Al concentration and a wider well width, the range of interdiffusion for an enhanced electroabsorption (EA) change increases with both of these parameters, while insertion loss increases with the former and decreases with the latter. However, the increase in loss is lower than that of the rectangular QW for the same magnitude of absorption change. The range of a tunable absorption-peak wavelength produced by interdiffussion increases with increasing Al concentration and decreases with increasing well width. Moreover, in a moderately interdiffused QW, the required bias reduces for the same level of EA modulation. For the best device operation, interdiffused QW's with the Al concentration between 0.3 and 0.4 and well width between 10 and 12 nm are must suitable for developing a general-purpose electroabsorptive modulator. When applied in high-speed modulators, the EA of a wide and shallow QW active-region structure can be further enhanced by the use of corresponding interdiffusion.published_or_final_versio
Electro-absorptive properties of interdiffused InGaAsP/InP quantum wells
The effects of Group III and Group V interdiffusions with a varied as-grown well width and P concentration in the quaternary InGaAsP quantum well material have been theoretically studied. Interesting features of multiple mini-well profiles, generated by interdiffusion induced compressive and tensile strains, have been obtained and varying envelope overlapping of the electron-hole wave functions has been observed. The results show that the interdiffusion of the Group III elements with a well width of 10 nm offers a wide adjustability of the operation wavelength, enhances Stark shift, and reduces absorption loss, although they bear the shortcomings of low electro-absorption and contrast ratio. Several methods are proposed here to recover the contrast ratio with a maximum improvement of 66%. For the Group V interdiffusion of a 10-nm-wide as-grown well, a low absorption loss and a large Stark shift will result, while that of a narrowed well can widen the band-edge wavelength adjustability with a large electro-absorption. These results are important for the development of electro-absorptive InGaAsP/InP diffused quantum well modulators. © 1997 American Institute of Physics.published_or_final_versio
The applications of an interdiffused quantum well in a normally on electroabsorptive fabry-perot reflection modulator
A Fabry-Perot reflection-type modulator which uses interdiffused AlGaAs/GaAs quantum wells as the active cavity material has been studied and optimized theoretically. An asymmetric Bragg reflector structure (modeled by transfer matrices), with a doped depletion layer in the heterostructure, has been considered. This is the first study to model such a material system in this type of modulator, and the results show improvement in modulation property over its as-grown rectangular quantum-well modulator. In particular, the change of reflectance in the diffused quantum-well modulator is almost 0.6 to 0.7, which is higher than that of the typically available values (∼0.5 to 0.6), while the OFF-state on-resonance reflectance is almost close to zero. The operation voltage is also reduced by more than half as the interdiffusion becomes extensive. The finesse of the more extensively diffused quantum well also increases. Both of these features contribute to an improvement of the change of reflectance in the modulator. The operation wavelengths can be adjusted over a range of 100 nm. However, the absorption coefficient change of the diffused quantum well increases only when there is a small amount of interdiffusion.published_or_final_versio
Improved performance of vertical-cavity modulator through the use of diffused quantum wells
published_or_final_versio
Polarization-insensitive electroabsorptive modulation using interdiffused InGaAs(P)-InP quantum wells
This is a theoretical study to demonstrate the use of interdiffusion in the realization of polarization insensitivity at the band-edge. Two InGaAs-InP quantum well as-grown structures have been investigated: one with lattice-matched condition and the other with small as-grown tensile strain (0.15%). The interdiffusion is considered to take place on the Group V (As and P) sublattice only. As a result, a tensile strain is produced which merges the heavy- and light-hole states in order to achieve polarization insensitivity. Criteria to develop polarization-insensitive quantum wells (QW's) using interdiffusion are presented here. When the two-phase interdiffusion mechanism is modeled, the results show that the well barrier interfaces of the QW maintain an abrupt profile while the well width remains constant after interdiffusion. The two interdiffused QW structures considered here can produce polarization insensitive electroabsorption at operation wavelengths around 1.55 μm. The one with lattice-matched condition is particularly attractive since it only requires an easy (high-yield) fabrication process with a simple postprocessing thermal annealing to achieve polarization insensitivity.published_or_final_versio
Electro -absorptive and electro -optic quantum well modulators using surface acoustic wave
The characteristics of Al0.3Ga0.7As/GaAs QW acousto-absorption and acousto-optic modulators using the interaction between Surface Acoustic Wave (SAW) and quantum well (QW) optical waveguide structures are analyzed here theoretically. The QW structures are optimized by maximizing the optical confinement of modal field in the active region and the piezoelectric effect of SAW on QWs. The electric field induced by SAW reduces non-uniformly in depth, which limits in the development of high efficiency modulators, especially for devices with a large number of QWs in the active region. We present the results of the analysis of a range of QW SQW modulators using between one and 25 QWs in the active region. For devices with thin active regions, the QW structures are designed so that at the top surface strong SAW effects can be obtained while for the 25 periods structure, the QWs located at a depth of 2/3 SAW wavelength in order to obtain an uniform SAW induced electric field. The results show that the single and five QW devices are suitable for absorptive modulation and optical modulation respectively while the 25-QW modulators can shorten the modulation interaction length and thus increase modulation bandwidth. The effective index change of these devices are at least 10 times larger than the conventional surface acoustic wave devices. These results make the quantum-well modulators more attractive for the development of acousto-optic device applications.published_or_final_versio
Diffused-quantum-well vertical cavity Fabry-Perot reflectionmodulator
Conference theme: Asia-Pacific Microelectronics 2000This is a first report to use diffused quantum well (DFQW) as the active cavity of the Fabry-Perot reflection modulator. Apart from the simple fabrication process of the DFQW, this material system provides a wavelength tuning range and improves the modulation properties of the device which thus is competitive with the same kind of modulator.published_or_final_versio
Asymmetric double-quantum-well phase modulator using surface acoustic waves
An AlGaAs-GaAs asymmetric double-quantum-well (DQW) optical phase modulator using surface acoustic waves is investigated theoretically. The optimization steps of the DQW structure, which so far have not been reported in detail, are discussed here. The optimized phase modulator structure is found to contain a five-period QDW active region. A surface acoustic wave induces a potential field which provides the phase modulation. Analysis of the modulation characteristics show that by using the asymmetric DQW, the large change of the induced potential at the surface and thus large modification of the quantum-well (QW) structure can be utilized. The modification of each QW structure is consistent, although this consistency is not always preserved in typical surface acoustic wave devices. Consequently, the change of refractive index in each of the five DQW's is almost identical. Besides, the change of effective refractive index is ten times larger here in comparison to a modulator with a five-period single QW as the active region and thus produces a larger phase modulation. In addition, a long wavelength and a low surface acoustic wave power required here simplify the fabrication of surface acoistic wave transducer and the acoustooptic phase modulator.published_or_final_versio
Electro-optic and electro-absorptive modulations of AlGaAs/GaAs quantum well using surface acoustic wave
The surface acoustic wave produced electron absorptive and electro-optic modulation in AlGaAs/ GaAs quantum well structures are theoretically analyzed. The quantum well structures are optimized by maximizing the optical confinement of the modal field in the active region and the piezoelectric effect of surface acoustic wave on the quantum wells. The effect of penetration depth of the surface acoustic wave on the number (1-25 periods) of quantum wells, serving as the active region, is being studied. For 1-5 period structures, the quantum wells are designed on the top surface so that a strong piezoelectric effect can be obtained. For the 25-period structure, the quantum wells locate at a depth of two-thirds the acoustic-wave wavelength in order to obtain a uniform surface acoustic-wave-induced electric field. The results show that the single and five quantum well devices are suitable for absorptive modulation and optical modulation, respectively, while a general advantage of the 25-period quantum well modulator can shorten the modulation interaction length and increase the modulation bandwidth. The effective index change of these devices are at least ten times larger than the conventional surface acoustic wave devices. These results make the surface acoustic wave quantum well modulators more attractive for the development of acousto-optic device applications. © 1998 American Institute of Physics.published_or_final_versio
Phase modulator defined by impurities induced disordering
Optical waveguide type phase modulators defined by impurities induced disordering (IID) are investigated. To achieve a better optical confinement, a two steps ion implantation process is carried out to introduce additional impurities with respect to depth in the cladding region. A more uniform refractive index profile in deeper lateral confined region is obtained after thermal annealing. The refractive index different between the core and cladding can be adjusted by controlling the extension of interdiffusion in the cladding. This provide tuning of single mode operating region. For present IID phase modulator with 25 period of 100 angstroms/100 angstroms Al0.3Ga0.7As/GaAs multiple quantum wells single mode operating at 0.88 μm, a normalized phase shift of 362°/Vmm, chirping parameter of 47, and absorption loss less than 120 cm-1 are achieved theoretically.published_or_final_versio
- …