2,998 research outputs found
PlasMOStor: A metal-oxide-Si field effect plasmonic modulator
Realization of chip-based all-optical and optoelectronic computational networks will require ultracompact Si-compatible modulators, ideally comprising dimensions, materials, and functionality similar to electronic complementary metal−oxide−semiconductor (CMOS) components. Here we demonstrate such a modulator, based on field-effect modulation of plasmon waveguide modes in a MOS geometry. Near-infrared transmission between an optical source and drain is controlled by a gate voltage that drives the MOS into accumulation. Using the gate oxide as an optical channel, electro-optic modulation is achieved in device volumes of half of a cubic wavelength with femtojoule switching energies and the potential for gigahertz modulation frequencies
Planar metal plasmon waveguides: frequency-dependent dispersion, propagation, localization, and loss beyond the free electron model
A numerical analysis of surface plasmon dispersion, propagation, and localization on smooth lossy films is presented. Particular attention is given to determining wavelength-dependent behavior of thin Ag slab waveguides embedded in a symmetric SiO2 environment. Rather than considering Ag as a damped free electron gas, the metal is defined by the experimentally determined optical constants of Johnson and Christy and Palik. As in free electron gas models, analytic dispersion results indicate a splitting of plasmon modes—corresponding to symmetric and antisymmetric field distributions—as film thickness is decreased below 50 nm. However, unlike free electron gas models, the surface plasmon wave vector remains finite at resonance with the antisymmetric-field plasmon converging to a pure photon mode for very thin films. In addition, allowed excitation modes are found to exist between the bound and radiative branches of the dispersion curve. The propagation characteristics of all modes are determined, and for thin films (depending upon electric field symmetry), propagation distances range from microns to centimeters in the near infrared. Propagation distances are correlated with both the field decay (skin depth) and energy density distribution in the metal and surrounding dielectric. While the energy density of most long-range surface plasmons exhibits a broad spatial extent with limited confinement in the waveguide, it is found that high-field confinement does not necessarily limit propagation. In fact, enhanced propagation is observed for silver films at ultraviolet wavelengths despite strong field localization in the metal. The surface plasmon characteristics described in this paper provide a numerical springboard for engineering nanoscale metal plasmon waveguides, and the results may provide a new avenue for integrated optoelectronic applications
Are negative index materials achievable with surface plasmon waveguides? A case study of three plasmonic geometries
We present a theoretical analysis of planar plasmonic waveguides
that support propagation of positive and negative index modes. Particular
attention is given to the modes sustained by metal-insulator-metal (MIM),
insulator-metal-insulator (IMI), and insulator-insulator-metal (IIM)
geometries at visible and near-infrared frequencies. We find that all three
plasmonic structures are characterized by negative indices over a finite
range of visible frequencies, with figures of merit approaching 20.
Moreover, using finite-difference time-domain simulations, we demonstrate
that visible-wavelength light propagating from free space into these
waveguides can exhibit negative refraction. Refractive index and figure-ofmerit
calculations are presented for Ag/GaP and Ag/Si3N_4 - based structures
with waveguide core dimensions ranging from 5 to 50 nm and excitation
wavelengths ranging from 350 nm to 850 nm. Our results provide the design
criteria for realization of broadband, visible-frequency negative index
materials and transformation-based optical elements for two-dimensional
guided waves. These geometries can serve as basic elements of threedimensional
negative-index metamaterials
Separation of bacterial spores from flowing water in macro-scale cavities by ultrasonic standing waves
The separation of micron-sized bacterial spores (Bacillus cereus) from a
steady flow of water through the use of ultrasonic standing waves is
demonstrated. An ultrasonic resonator with cross-section of 0.0254 m x 0.0254 m
has been designed with a flow inlet and outlet for a water stream that ensures
laminar flow conditions into and out of the resonator section of the flow tube.
A 0.01905-m diameter PZT-4, nominal 2-MHz transducer is used to generate
ultrasonic standing waves in the resonator. The acoustic resonator is 0.0356 m
from transducer face to the opposite reflector wall with the acoustic field in
a direction orthogonal to the water flow direction. At fixed frequency
excitation, spores are concentrated at the stable locations of the acoustic
radiation force and trapped in the resonator region. The effect of the
transducer voltage and frequency on the efficiency of spore capture in the
resonator has been investigated. Successful separation of B. cereus spores from
water with typical volume flow rates of 40-250 ml/min has been achieved with
15% efficiency in a single pass at 40 ml/min.Comment: 11 pages, 6 figure
Alien Registration- Dionne, Marie A. (Lewiston, Androscoggin County)
https://digitalmaine.com/alien_docs/29253/thumbnail.jp
The new "p-n junction": Plasmonics enables photonic access to the nanoworld
Since the development of the light microscope in the 16th century, optical device size and performance have been limited by diffraction. Optoelectronic devices of today are much bigger than the smallest electronic devices for this reason. Achieving control of light-material interactions for photonic device applications at the nanoscale requires structures that guide electromagnetic energy with subwavelength-scale mode confinement. By converting the optical mode into nonradiating surface plasmons, electromagnetic energy can be guided in structures with lateral dimensions of less than 10% of the free-space wavelength. A variety of methods-including electron-beam lithography and self-assembly-have been used to construct both particle and planar plasmon waveguides. Recent experimental studies have confirmed the strongly coupled collective plasmonic modes of metallic nanostructures. In plasmon waveguides consisting of closely spaced silver rods, electromagnetic energy transport over distances of 0.5 mu m has been observed. Moreover, numerical simulations suggest the possibility of multi-centimeter plasmon propagation in thin metallic stripes. Thus, there appears to be no fundamental scaling limit to the size and density of photonic devices, and ongoing work is aimed at identifying important device performance criteria in the subwavelength size regime. Ultimately, it may be possible to design an entire class of subwavelength-scale optoelectronic components (waveguides, sources, detectors, modulators) that could form the building blocks of an optical device technology-a technology scalable to molecular dimensions, with potential imaging, spectroscopy, and interconnection applications in computing, communications, and chemical/biological detection
Alien Registration- Dionne, Mary A. (Portland, Cumberland County)
https://digitalmaine.com/alien_docs/23900/thumbnail.jp
- …