A hybrid single-mode laser based on slotted silicon waveguides

An InGaAsP-Si hybrid single-mode laser based on etched slots in silicon waveguides was demonstrated operating at 1543 nm. The InGaAsP gain structure was bonded onto a patterned silicon-on-insulator wafer by selective area metal bonding method. The mode-selection mechanism based on a slotted silicon waveguide was applied, in which the parameters were designed using the simulation tool cavity modeling framework. The III-V lasers employed buried ridge stripe structure. The whole fabrication process only needs standard photolithography and inductively coupled plasma etching technology, which reduces cost for ease in technology transfer. At room temperature, a single mode of 1543-nm wavelength at a threshold current of 21 mA with a maximum output power of 1.9 mW in continuous-wave regime was obtained. The side mode suppression ratio was larger than 35 dB. The simplicity and flexibility of the fabrication process and a low cost make the slotted hybrid laser a promising light source

Quantum Well Laser Diodes With Slightly-Doped Tunnel Junction

We experimentally investigate the electrical and optical characteristics of conventional quantum well laser diodes and the quantum well laser diodes with slightly-doped tunnel junction N++GaAs/undoped-GaAs. The results show that the slightly-doped tunnel junction give significant role on the laser diodes performances in the InGaAs/GaAs quantum well material system. The TJ LD has a internal quantum efficiency of 21% and the loss is 6.9 em -1 , the current threshold is 35 mA, both the lasers are operating at 1.06 μm, but the slightly-doped tunnel junction diode show nonlinear S-shaped current-voltage and broadband lasing characteristics. The results may also lead to the realization of more applications

Construction and application of an intelligent prediction model for the coal pillar width of a fully mechanized caving face based on the fusion of multiple physical parameters

The scientific and reasonable width of coal pillars is of great significance to ensure safe and sustainable mining in the western mining area of China. To achieve a precise analysis of the reasonable width of coal pillars in fully mechanized caving face sections of gently inclined coal seams in western China, this paper analyzes and studies various factors that affect the retention of coal pillars in the section, and calculates the correlation coefficients between these influencing factors. We selected parameters with good universality and established a data set of gently inclined coal seams based on 106 collected engineering cases. We used the LSTM algorithm loaded with a simulated annealing algorithm for training, and constructed a coal pillar width prediction model. Compared with other prediction algorithms such as the original LSTM algorithm, the residual sum of squares and root mean square error were reduced by 27.2% and 24.2%, respectively, and the correlation coefficient was increased by 12.6%. An engineering case analysis was conducted using the W1123 working face of the Kuangou Coal Mine. The engineering verification showed that the SA-CNN-LSTM coal pillar width prediction model established in this paper has good stability and accuracy for multi-parameter nonlinear coupling prediction results. We have established an effective solution for achieving the accurate reservation of coal pillar widths in the fully mechanized caving faces of gently inclined coal seams

Asymmetric quantum well broadband thyristor laser

A broadband thyristor laser based on InGaAs/GaAs asymmetric quantum well (AQW) is fabricated by metal organic chemical vapor deposition (MOCVD). The 3-μm-wide Fabry–Perot (FP) ridge-waveguide laser shows an S-shape I−V characteristic and exhibits a flat-topped broadband optical spectrum coverage of ~27 nm (Δ−10 dB) at a center wavelength of ~1090 nm with a total output power of 137 mW under pulsed operation. The AQW structure was carefully designed to establish multiple energy states within, in order to broaden the gain spectrum. An obvious blue shift emission, which is not generally acquired in QW laser diodes, is observed in the broadening process of the optical spectrum as the injection current increases. This blue shift spectrum broadening is considered to result from the prominent band-filling effect enhanced by the multiple energy states of the AQW structure, as well as the optical feedback effect contributed by the thyristor laser structure

Differences in phyllosphere microbiomes among different Populus spp. in the same habitat

IntroductionThe above-ground parts of terrestrial plants are collectively known as the phyllosphere. The surface of the leaf blade is a unique and extensive habitat for microbial communities. Phyllosphere bacteria are the second most closely associated microbial group with plants after fungi and viruses, and are the most abundant, occupying a dominant position in the phyllosphere microbial community. Host species are a major factor influencing the community diversity and structure of phyllosphere microorganisms.MethodsIn this study, six Populus spp. were selected for study under the same site conditions and their phyllosphere bacterial community DNA fragments were paired-end sequenced using 16S ribosomal RNA (rRNA) gene amplicon sequencing. Based on the distribution of the amplicon sequence variants (ASVs), we assessed the alpha-diversity level of each sample and further measured the differences in species abundance composition among the samples, and predicted the metabolic function of the community based on the gene sequencing results.ResultsThe results revealed that different Populus spp. under the same stand conditions resulted in different phyllosphere bacterial communities. The bacterial community structure was mainly affected by the carbon and soluble sugar content of the leaves, and the leaf nitrogen, phosphorus and carbon/nitrogen were the main factors affecting the relative abundance of phyllosphere bacteria.DiscussionPrevious studies have shown that a large proportion of the variation in the composition of phyllosphere microbial communities was explained by the hosts themselves. In contrast, leaf-borne nutrients were an available resource for bacteria living on the leaf surface, thus influencing the community structure of phyllosphere bacteria. These were similar to the conclusions obtained in this study. This study provides theoretical support for the study of the composition and structure of phyllosphere bacterial communities in woody plants and the factors influencing them

Intercropping changed the soil microbial community composition but no significant effect on alpha diversity

IntroductionEnhancing the planning of the forest-agricultural composite model and increasing the efficiency with which forest land is utilized could benefit from a thorough understanding of the impacts of intercropping between forests and agriculture on soil physicochemical properties and microbial communities.MethodsPopulus cathayana × candansis cv. Xinlin No.1 and Glycine max intercrop soils, along with their corresponding monocrops, were used in this study’s llumina high-throughput sequencing analysis to determine the composition and diversity of soil bacterial and fungal communities.ResultsThe findings indicated that intercropping considerably raised the soil’s total phosphorus content and significantly lowered the soil’s carbon nitrogen ratio when compared to poplar single cropping. Furthermore, the total carbon and nitrogen content of soil was increased and the soil pH was decreased. The sequencing results showed that intercropping had no significant effect on soil alpha diversity. Intercropping could increase the composition of fungal community and decrease the composition of bacterial community in poplar soil. At the phylum level, intercropping significantly increased the relative abundance of four dominant phyla, i.e., Patescibacteria, Proteobacteria, Patescibacteria and Deinococcus-Thermus. And the relative abundances of only two dominant phyla were significantly increased. It was found that soil total phosphorus and available phosphorus content had the strongest correlation with soil bacterial community diversity, and soil pH had the strongest correlation with soil fungal community diversity.DiscussionThe results of this study were similar to those of previous studies. This study can serve as a theoretical foundation for the development of a poplar and black bean-based forest-agricultural complex management system in the future

Endophytic Communities of Transgenic Poplar Were Determined by the Environment and Niche Rather Than by Transgenic Events

Microbial communities associated with plants represent key determinants of plant health, survival, and growth. However, a good understanding of the structural composition of the bacterial and fungal microbiome present in different plant tissues and growing environments, especially in transgenic woody plants, is required. In the present study, we hypothesized that environmental conditions, ecological niches, and transgenic events could influence the community structure of plant-associated microorganisms (bacterial and fungal endophytes). We sampled the root and stem endospheres of field-grown transgenic and non-transgenic poplar trees (Populus alba × P. berolinensis) and applied 16S rRNA and internal transcribed spacer amplicon Illumina MiSeq sequencing to determine the bacterial and fungal communities associated with the different plant habitats and tissues. We found that actinobacteria, proteobacteria, bacteroidetes, and firmicutes were the dominant endophytic bacteria, and the fungal community was dominated by dothideomycetes, agaricomycetes, leotiomycetes, and sordariomycetes. In conclusion, transgenic events did not affect the endophytic bacterial and fungal diversity of poplar trees. The bacterial and fungal community structure depends on the pH and the soil organic matter content. Each plant tissue represents a unique ecological niche for the microbial communities. Finally, we identified the indicator operational taxonomic units (OTUs) and core microbiome associated with the different plant tissues of Populus and different environmental conditions. The results provide a basis for further study of host-microbial interactions with the identified abundant OTUs of Populus