Finite element analysis of mechanical properties of 2.5D angle-interlock woven composites: Part 1— Full-cell model and its validation

A new parameterized micro-structural model of 2.5D angle-interlock woven composites, named ‘full-cell model’, has been established. In order to verify the validation of finite element model (FEM) based on the full-cell model, the effective elastic properties and the mechanical response of 2.5D woven composites are presented. Additionally, the effects of fibre aggregation density and thickness on the mechanical properties are also investigated in detail. The experimental results are compared with the values of FEM based on the full-cell model and inner-cell model

A STUDY OF THE RATE OF TORQUE BETWEEN UPPER AND LOWER LIMBS OF MALE SPRINTERS

In order evaluate the level in their strength development and to study the appropriate rate of torque among muscles at each joint so as to design criterion scientifically evaluating the magnitude of force, we assigned the sUbjects to four groups: male children (CHIL), male juveniles (JUVE), male juvenile sprinters from sports training school (JSTS), and young sprinters (YOSP). The flexors and extensor strength of their hip, knee, and shoulder joint are measured by an isokinetic test system. It is indicated in the result of the experiment the rate between high-speed strength and absolute strength of left and right knee extensors was lower than that of flexors. We have calculated and compared the relative torques of hip, knee, shoulder joint at the velocity of 600 /s using the relative peak torque of hip joint. Compared with CHIL, there was a significant increase in the knee average rate than that of shoulder in YOSP

©2008 INFORMS A Price Discrimination Model of Trade Promotions

doi 10.1287/mksc.1070.031

The Strong Cell-based Hydrogen Peroxide Generation Triggered by Cold Atmospheric Plasma.

Hydrogen peroxide (H2O2) is an important signaling molecule in cancer cells. However, the significant secretion of H2O2 by cancer cells have been rarely observed. Cold atmospheric plasma (CAP) is a near room temperature ionized gas composed of neutral particles, charged particles, reactive species, and electrons. Here, we first demonstrated that breast cancer cells and pancreatic adenocarcinoma cells generated micromolar level H2O2 during just 1 min of direct CAP treatment on these cells. The cell-based H2O2 generation is affected by the medium volume, the cell confluence, as well as the discharge voltage. The application of cold atmospheric plasma (CAP) in cancer treatment has been intensively investigated over the past decade. Several cellular responses to CAP treatment have been observed including the consumption of the CAP-originated reactive species, the rise of intracellular reactive oxygen species, the damage on DNA and mitochondria, as well as the activation of apoptotic events. This is a new previously unknown cellular response to CAP, which provides a new prospective to understand the interaction between CAP and cells in vitro and in vivo. The short-lived reactive species in CAP may activate cells in vivo to generate long-lived reactive species such as H2O2, which may trigger immune attack on tumorous tissues via the H2O2-mediated lymphocyte activation

The Specific Vulnerabilities of Cancer Cells to the Cold Atmospheric Plasma-Stimulated Solutions.

Cold atmospheric plasma (CAP), a novel promising anti-cancer modality, has shown its selective anti-cancer capacity on dozens of cancer cell lines in vitro and on subcutaneous xenograft tumors in mice. Over the past five years, the CAP-stimulated solutions (PSS) have also shown their selective anti-cancer effect over different cancers in vitro and in vivo. The solutions used to make PSS include several bio-adaptable solutions, mainly cell culture medium and simple buffered solutions. Both the CAP-stimulated medium (PSM) and the CAP-stimulated buffered solution (PSB) are able to significantly kill cancer cells in vitro. In this study, we systematically compared the anti-cancer effect of PSM and PSB over pancreatic adenocarcinoma cells and glioblastoma cells. We demonstrated that pancreatic cancer cells and glioblastoma cells were specifically vulnerable to PSM and PSB, respectively. The specific response such as the rise of intracellular reactive oxygen species of two cancer cell lines to the H2O2-containing environments might result in the specific vulnerabilities to PSM and PSB. In addition, we demonstrated a basic guideline that the toxicity of PSS on cancer cells could be significantly modulated through controlling the dilutability of solution

The structural and optical properties of GaSb/InGaAs type-II quantum dots grown on InP (100) substrate

We have investigated the structural and optical properties of type-II GaSb/InGaAs quantum dots [QDs] grown on InP (100) substrate by molecular beam epitaxy. Rectangular-shaped GaSb QDs were well developed and no nanodash-like structures which could be easily found in the InAs/InP QD system were formed. Low-temperature photoluminescence spectra show there are two peaks centered at 0.75eV and 0.76ev. The low-energy peak blueshifted with increasing excitation power is identified as the indirect transition from the InGaAs conduction band to the GaSb hole level (type-II), and the high-energy peak is identified as the direct transition (type-I) of GaSb QDs. This material system shows a promising application on quantum-dot infrared detectors and quantum-dot field-effect transistor

Effects of the second-order hydrodynamics on the dynamic behavior of the platform among the wind-wave hybrid systems

This paper presents three different wind-wave hybrid systems (HSs) with multiple point-absorption wave energy converters (WECs) integrated onto a floating semi-submersible wind turbine (WT). The focus of the present study is to explore the effects of the second-order wave forces on the dynamic behavior of the platform in the HS, including the platform motion and the mooring line tension, under both operational and extreme sea states. ANSYS/AQWA based on 3D diffraction/radiation potential theory is used to conduct numerical investigation on the second-order hydrodynamics of the HS. To ensure the reliability of the investigation, the validations of the semi-submersible platform and point-absorption WEC are done based on the available experimental data. Additionally, two models, “1st-order” and "1st&2nd-order", are set up for comparative analysis, to highlight the significance of the second-order forces. The simulation results show that the second-order hydrodynamics have a significant influence on the surge and pitch responses of the platform, but almost no effects on the heave response. In addition to this, ignoring the second-order hydrodynamics will significantly underestimate the mooring line tension response. Overall, this study suggests that the second-order hydrodynamics should be considered in the design of wind-wave HSs, in order to ensure their performance and safety, especially under the severe sea states

Review of Supercritical Hydrothermal Combustion

Two major points in supercritical hydrothermal combustion were reviewed:(1) The structure of semi-batch reactors or continuous reactors used in different institutes and colleges. These investigations can be used to guide the design of reactors for later scholars and lay the foundation for the industrialization of supercritical hydrothermal combustion. (2) The research status of characterization of hydrothermal flame processes by various scholars. These investigations can be used to guide the process parameters of industrialization of supercritical hydrothermal combustion. The continuous reactor designed in each organization is very sophisticated, which can avoid the two major problems of reaction in the supercritical state: salt precipitation and corrosion. The ignition temperature, extinction temperature, and other characteristics of supercritical hydrothermal combustion studied by scholars are summarized and the laws are basically similar. The removal rate of different organic matters was also summarized under supercritical hydrothermal combustion, and the removal rate of more than 99% was basically achieved