3,485 research outputs found

    Observations of Very High Energy Gamma-Rays during Moonlight and Twilight with the MAGIC Telescope

    Full text link
    We study the capability of the MAGIC telescope to observe under moderate moonlight. TeV gamma-ray signals from the Crab nebula were detected with the MAGIC telescope during periods when the Moon was above the horizon and during twilight. This was accomplished by increasing the trigger discriminator thresholds. No change is necessary in the high voltage settings since the camera PMTs were especially designed to avoid high currents. We characterize the telescope performance by studying the effect of the moonlight on the gamma-ray detection efficiency and sensitivity, as well as on the energy threshold.Comment: Contribution to the 30th ICRC, Merida Mexico, July 2007 on behalf of the MAGIC Collaboratio

    Determination of the Night Sky Background around the Crab pulsar using its optical pulsation

    Full text link
    The poor angular resolution of imaging gamma-ray telescopes is offset by the large reflector areas of next generation telescopes such as MAGIC (17~m diameter), which makes the study of optical emission associated with some gamma-ray sources feasible. Furthermore, the extremely fast time response of photomultipliers (PMs) makes them ideal detectors for fast (subsecond) optical transients and periodic sources like pulsars. The optical pulse of the Crab pulsar was detected with the HEGRA CT1 central pixel using a modified PM, similar to the future MAGIC camera PMs. The purpose of these periodic observations was to determine the light of the night sky (LONS) for the galactic anticenter Crab region.Our results are between 2.5 and 3 times larger than the previously measured LONS (outside the galactic plane), as expected since the Crab pulsar is in the galactic plane, which implies a slightly higher energy threshold for Crab observations, if the higher value of CT1 measured LONS rate for galactic sources is used.Comment: 19 pages, 6 figures, accepted by Astroparticle Physic

    Local dependence in bivariate copulae with beta marginals

    Get PDF
    The local dependence function (LDF) describes changes in the correlation structure of continuous bivariate random variables along their range. Bivariate density functions with Beta marginals can be used to model jointly a wide variety of data with bounded outcomes in the (0,1) range, e.g. proportions. In this paper we obtain expressions for the LDF of bivariate densities constructed using three different copula models (Frank, Gumbel and Joe) with Beta marginal distributions, present examples for each, and discuss an application of these models to analyse data collected in a study of marks obtained on a statistics exam by postgraduate students

    Production cross-sections and momentum distributions of fragments from neutron-deficient 36Ar at 1.05 A.GeV

    Full text link
    We have measured production cross sections and longitudinal momentum distributions of fragments from neutron-deficient 36Ar at 1.05 A.GeV. The production cross-sections show excellent agreement with the predictions of the semiempirical formula EPAX. We have compared these results, involving extremly neutron deficient nuclei, with model calculations to extract informa tion about the response of these models close to the driplines. The longitudinal momentum distributions have also been extracted and are compared with the Goldhaber and Morrissey systematics.Comment: 16 pages, 6 figure

    Energy reconstruction in a highly granularity semi-digital hadronic calorimeter

    Full text link
    International audienceThe Semi-Digital Hadronic CALorimeter(SDHCAL) using Glass Resistive Plate Chambers (GRPCs) is one of the calorimeters proposed for particle physics experiments at the future electron-positron collider. It is a high granularity calorimeter which is required for the application of the particle flow algorithm in order to improve the jet energy resolution as one of the goals of this experiments. We discuss the energy reconstruction, based on digital and semi-Digital methods, to study the effect on the improvement of the single particle energy resolution and the linearity of the detecor response. This study was performed with the GEANT4 simulation. Results on the energy resolution and linearity, for negative pions over an energy range from 1 to 100 GeV are presented and compared with different energy reconstruction methods including Artificial Neural Networks. 1. Introduction The CALICE collaboration [1] has developed several calorimeter prototypes to evaluate the most appropriate one to be used in the future Linear Collider. One of them is the semi-digital hadronic calorimeter (SDHCAL) constructed in IPNL with the collaboration of other laboratories. In this paper we first present the geometry of this prototype used in simulation. Then, we present the different techniques of energy reconstruction used in SDHCAL. Finally, the results of the energy resolution and linearity obtained are presented and commented upon

    Towards portable muography with small-area, gas-tight glass Resistive Plate Chambers

    Get PDF
    Imaging techniques that use atmospheric muons, collectively named under the neologism "muography", have seen a tremendous growth in recent times, mainly due to their diverse range of applications. The most well-known ones include but are not limited to: volcanology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground mapping, etc. These methods are based on the attenuation or deviation of muons to image large and/or dense objects where conventional techniques cannot work or their use becomes challenging. In this context, we have constructed a muography telescope based on "mini glass-RPC planes" following a design similar to the glass-RPC detectors developed by the CALICE Collaboration and used by the TOMUVOL experiment in the context of volcano radiography, but with smaller active area (16 ×\times 16 cm2^{2}). The compact size makes it an attractive choice with respect to other detectors previously employed for imaging on similar scales. An important innovation in this design is that the detectors are sealed. This makes the detector more portable and solves the usual safety and logistic issues for gas detectors operated underground and/or inside small rooms. This paper provides an overview on our guiding principles, the detector development and our operational experiences. Drawing on the lessons learnt from the first prototype, we also discuss our future direction for an improved second prototype, focusing primarily on a recently adopted serigraphy technique for the resistive coating of the glass plates.Comment: 8 pages, 7 figures, XV Workshop on Resistive Plate Chambers and Related Detectors (RPC2020
    corecore