Circulating CD133+VEGFR2+ and CD34+VEGFR2+ cells and arterial function in patients with beta-thalassaemia major

Arterial dysfunction has been documented in patients with beta-thalassaemia major. This study aimed to determine the quantity and proliferative capacity of circulating CD133+VEGFR2+ and CD34+VEGFR2+ cells in patients with beta-thalassaemia major and those after haematopoietic stem cell transplantation (HSCT), and their relationships with arterial function. Brachial arterial flow-mediated dilation (FMD), carotid arterial stiffness, the quantity of these circulating cells and their number of colony-forming units (CFUs) were determined in 17 transfusion-dependent thalassaemia patients, 14 patients after HSCT and 11 controls. Compared with controls, both patient groups had significantly lower FMD and greater arterial stiffness. Despite having increased CD133+VEGFR2+ and CD34+VEGFR2+ cells, transfusion-dependent patients had significantly reduced CFUs compared with controls (p = 0.002). There was a trend of increasing CFUs across the three groups with decreasing iron load (p = 0.011). The CFUs correlated with brachial FMD (p = 0.029) and arterial stiffness (p = 0.02), but not with serum ferritin level. Multiple linear regression showed that CFU was a significant determinant of FMD (p = 0.043) and arterial stiffness (p = 0.02) after adjustment of age, sex, body mass index, blood pressure and serum ferritin level. In conclusion, arterial dysfunction found in patients with beta-thalassaemia major before and after HSCT may be related to impaired proliferation of CD133+VEGFR2+ and CD34+VEGFR2+ cells

Lupus nephritis in Chinese children--a territory-wide cohort study in Hong Kong

We report a multicenter study of Chinese children in Hong Kong with systemic lupus erythematosus (SLE) nephritis. Children were included if: they fulfilled the ACR criteria, had significant proteinuria or casturia, were Chinese and younger than 19 years and had been diagnosed with SLE between January 1990 and December 2003. Investigators in each center retrieved data on clinical features, biopsy reports, treatment and outcome of these patients. There were 128 patients (eight boys, 120 girls; mean age: 11.9+/-2.8 years). About 50% presented with multisystem illness and 40% with nephritic/nephrotic symptoms. Negative anti-dsDNA antibodies were found in 6% of the patients. Renal biopsy revealed WHO Class II, III, IV and V nephritis in 13 (10%), 22 (17%), 69 (54%) and 13 (10%) patients, respectively. The clinical severity of the nephritis did not accurately predict renal biopsy findings. The follow-up period ranged from 1 to 16.5 years (mean+/-SD: 5.76+/-3.61 years). During the study five patients died (two from lupus flare, one from cardiomyopathy, two from infections). Four patients had endstage renal failure (ESRF) (one died during a lupus flare). All deaths and end-stage renal failure occurred in the Class IV nephritis group. Chronic organ damage was infrequent in the survivors. The actuarial patient survival rates at 5, 10 and 15 years of age were 95.3, 91.8, and 91.8%, respectively. For Class IV nephritis patients, the survival rates without ESRF at 5, 10, and 15 years were 91.5, 82.3 and 76%, respectively. The survival and chronic morbidity rates of the Chinese SLE children in the present study are comparable to those of other published studies.postprin

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Finite strip method and its application to slab and girder bridges

Bibliography: p. 231-234

Finite strip analysis of structures

Bibliography: p. 181-187

Static and dynamic behaviour of rectangular plates using higher order finite strips

A higher order finite strip using basic function series in the longitudinal direction and a quintic polynomial in the other direction is developed in this paper and applied to various static and dynamic problems in plates. Excellent results have been obtained for all cases. In the finite strip method, the basic function series satisfy the end conditions in the longitudinal direction of the plate a priori, and a two-dimensional plate bending problem can thus be reduced to a one-dimensional 'equivalent' beam problem. As a result, the size as well as the band width of the stiffness matrix has been greatly reduced, and the whole procedure can be programmed on small computers. Also little input data is required for such a program. © 1972

Natural vibrations of thin, flat-walled structures with different boundary conditions

The natural frequencies of thin, flat-walled structures with different boundary conditions are analyzed by the finite strip method. This class of structures includes plates with eccentric stiffeners, thin multi-celled box girder bridges, and folded plate roofs, etc. The method is simple and at the same time very powerful and versatile, and can treat problems with variably-spaced stiffeners, and with orthotropic and variable thickness plates without any difficulty. The finite strip method is an extension of the now well-known finite element method. This method is, however, semi-analytical in nature, since the displacement functions chosen are always of the form φ(x)ψ(y), in which φ(x) is a polynomial with undetermined parameters, and ψ(y) a function series satisfying a priori the two end conditions. Thus a two-dimensional strip is reduced to a one-dimensional problem, with a corresponding reduction in computational efforts. © 1971

Vibration analysis of cylindrical panels

The finite strip solution for the free vibrations of cylindrical panels with any homogeneous boundary conditions is presented. The effects on the natural frequencies for different parameters such as radius, thickness and Poisson's ratio are studied and the numerical results are compared with other exact and approximate solutions. © 1972