Auto-disturbance-rejection controller for SVC to enhance wind farm voltage stability

Author name used in this publication: C. Y. ChungRefereed conference paper2008-2009 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe

Fasting plasma zeaxanthin response to Fructus barbarum L. (wolfberry; Kei Tze) in a food-based human supplementation trial

Antioxidant Research Group, Faculty of Health & Social Sciences2004-2005 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

The localization of multiple cathepsin mRNAs in the seminiferous epithelium by in situ hybridization is consistent with their role in germ cell (GC) migration

Abstract no. 707published_or_final_versio

Phase transformation behaviour of porous NiTi alloys fabricated by capsule-free hot isostatic pressing

Differential scanning calorimetry (DSC) was used to characterize the phase transformation behaviour of porous Ni50Ti50 alloys fabricated by capsule-free hot isostatic pressing (CF-HIP) with different cold compaction pressures. Experimental results reveal that a multi-stage martensitic transformation (MST) exists in the sintered porous NiTi alloys on cooling while the reverse transformation upon heating is either a single or two-stage phase transformation. The DSC thermal analysis indicates that the cold compaction pressure has great effect on the subsequent transformation temperatures. Generally, the phase transformation temperatures of porous NiTi alloys with lower cold compaction pressure are higher than those compacted with higher pressure. With increase in the annealing time, the transformation temperatures increase quickly when the cold compaction pressure was 150MPa. On the other hand, the transformation temperatures change only slightly when the cold compaction pressure was varied from 300MPa to 400MPa. These phenomena can be attributed to the combined effect of larger plastic deformation with higher dislocations density produced by cold compaction and the precipitation of the second phase in the porous NiTi alloys.published_or_final_versio

Determination of AGC capacity requirement and regulation strategies considering penalties of tie-line power flow deviations

2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Stability analysis of electrical powered wheelchair-mounted robotic-assisted transfer device

The ability of people with disabilities to live in their homes and communities with maximal independence often hinges, at least in part, on their ability to transfer or be transferred by an assistant. Because of limited resources and the expense of personal care, robotic transfer assistance devices will likely be in great demand. An easy-to-use system for assisting with transfers, attachable to electrical powered wheelchairs (EPWs) and readily transportable, could have a significant positive effect on the quality of life of people with disabilities. We investigated the stability of our newly developed Strong Arm, which is attached and integrated with an EPW to assist with transfers. The stability of the system was analyzed and verified by experiments applying different loads and using different system configurations. The model predicted the distributions of the system’s center of mass very well compared with the experimental results. When real transfers were conducted with 50 and 75 kg loads and an 83.25 kg dummy, the current Strong Arm could transfer all weights safely without tip-over. Our modeling accurately predicts the stability of the system and is suitable for developing better control algorithms to enhance the safety of the device

Improved corrosion resistance of plasma carbon coated NiTi orthopedic materials

Nickel titanium (NiTi) alloys are useful in orthopedic applications because of their super-elastic properties and shape memory effects. However, when NiTi is used for a prolonged period of time, harmful Ni ions can leach out into the surrounding body fluid inside a human body, and so it is important to design a method to impede the out-diffusion of nickel from the materials into the biological medium. We aim at producing a barrier to mitigate the release of Ni ions during normal use. Carbon coatings have been shown to possess excellent bio-compatibility and good mechanical strength. In this work, amorphous hydrogenated DLC films with a graded C/NiTi interface were fabricated by plasma immersion ion implantation & deposition (PU & D) to provide such a barrier layer on NiTi. The elemental depth profiles and film thickness were determined by X-ray photoelectron spectroscopy (XPS) whereas the surface morphology was evaluated using atomic force microscopy (AFM). The film structure was studied by X-ray diffraction (XRD) and Raman spectroscopy. The corrosion resistance of the film was investigated using electrochemical tests based on ASTM G5-94. Compared to the control sample, the corrosion potential of the sample with the carbon coating changes from -250 to -50 mV and the film breakdown potential increases from 250 to 1200 mV. The corrosion current also diminishes from 10-6 to 10-7 A. The simulated body fluid (SBF) solutions after the electrochemical test were analyzed for Ni concentrations by inductively-coupled plasma mass spectrometry (ICPMS) and that data show that a much smaller amount of Ni has been released from the treated sample surface compared to the untreated control sample surface. Our results thus indicate that the deposited DLC film is effective in retarding the release of Ni ions from the bulk materials and more superior corrosion resistance is achieved based on our tests in a simulated fluid medium and at human body temperature.published_or_final_versio

Biomimetic deposition of apatite on surface chemically modified porous NiTi shapememory alloy

Porous NiTi shape memory alloy (SMA) with 48% porosity and an average pore size of 50800 μm was synthesized by capsule-free hot isostatic pressing (CF-HIP). To enhance the surface bioactivity, the porous NiTi SMA was subjected to H"2O"2 and subsequent NaOH treatment. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses revealed that a porous sodium titanate (Na"2TiO"3) film had formed on the surface of the porous NiTi SMA. An apatite layer was deposited on this film after immersion in simulated body fluid at 37°C, while no apatite could be found on the surface of the untreated porous NiTi SMA. The formation of the apatite layer infers that the bioactivity of the porous NiTi SMA may be enhanced by surface chemical treatment, which is favorable for its application as bone implants. © 2008 World Scientific Publishing Company.postprin

Effect of 5-aminolevulinic acid-based photodynamic therapy via reactive oxygen species in human cholangiocarcinoma cells

Cancer cells have been reported to exhibit an enhanced capacity for protoporphyrin IX (PpIX) synthesis facilitated by the administration of 5-aminolevulinic acid (ALA). We investigated the effect of ALA-based photodynamic therapy (PDT) on human cholangiocarcinoma cells (HuCC-T1). Since protoporphyrin IX (PpIX), a metabolite of ALA, can produce reactive oxygen species (ROS) under irradiation and then induce phototoxicity, ALA-based PDT is a promising candidate for the treatment of cholangiocarcinoma. When various concentrations of ALA (0.05–2 mM) were used to treat HuCC-T1 cells for 6 or 24 hours, the intracellular PpIX level increased according to the ALA concentration and treatment time. Furthermore, an increased amount of PpIX in HuCC-T1 cells induced increased production of ROS by irradiation, resulting in increased phototoxicity

Survey on operating reserve procurement and pricing in deregulated electricity market environment

2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe