40 research outputs found
Polymer electrolyte membranes and process for the production thereof
The process for the production of a polymer electrolyte membrane, comprises the successive steps of: preparing a mixed solution of a Room Temperature Ionic Liquid (RTIL), at least one alkaline metal salt and a photosensitive hydrogen abstracting component at a temperature in the range 20 to 70 °C, wherein the RTIL is a compound consisting of at least one organic cation and at least one organic or inorganic anion; adding to the solution a polymeric material at a temperature in the range of 20-70 °C; blending the solution added with the polymeric material at a temperature in the range of 70-140 °C to get a uniform mixture; pressing the mixture between two sheets at a temperature in the range of 60 - 150 °C and a pressure in the range of 20 - 80 bar, so that a film is formed; and exposing the film to UV light, so that the polymeric material of the film is cross-linked and the polymer electrolyte membrane is obtained
Effects of nanoscale SiO2 on the thermal and transport properties of solvent-free, polyethylene oxide (PEO)-based polymer electrolytes
7Li and 19F diffusion coefficients and thermal properties of non-aqueous electrolyte solutions for rechargeable lithium batteries
Towards enhanced sodium storage of anatase TiO2: Via a dual-modification approach of Mo doping combined with AlF3coating
Recent studies on anatase TiO2 have demonstrated its capability of performing as an anode material for sodium-ion batteries (SIBs) even though, due to poor conductivity, realistic applications have not yet been foreseen. In order to try to address this issue, herein, we shall introduce a cost effective and facile route based on the co-precipitation method for the synthesis of Mo-doped anatase TiO2 nanoparticles with AlF3 surface coating. The electrochemical measurements demonstrate that the Mo-doped anatase TiO2 nanoparticles deliver an 3c40% enhanced reversible capacity compared to pristine TiO2 (139.8 vs. 100.7 mA h g-1 at 0.1 C after 50 cycles) due to an improved electronic/ionic conductivity. Furthermore, upon AlF3 coating, the overall system can deliver a much higher reversible capacity of 178.9 mA h g-1 ( 3c80% increase with respect to pristine TiO2) with good cycling stability and excellent rate capabilities of up to 10 C. The experimental results indicate that the AlF3 surface coating could indeed effectively reduce the solid electrolyte interfacial resistance, enhance the electrochemical reactivity at the surface/interface region, and lower the polarization during cycling. The improved performance achieved using a cost-effective fabrication approach makes the dually modified anatase TiO2 a promising anode material for high-performance SIBs. This journal i