Antioxidant requirements of rats exposed to 100 % oxygen. Part 2 - Effects of dietary ascorbic acid

Dietary ascorbic acid effects as antioxidants in rats exposed to 100 percent oxyge

Blood changes in acutely splenectomized rats during prolonged hyperoxic exposure

Effect of high pressure oxygen exposure on red blood cells in splenectomized rat

A HIGH CURRENT, HIGH VOLTAGE SOLID-STATE PULSE GENERATOR FOR THE NIF PLASMA ELECTRODE POCKELS CELL

A high current, high voltage, all solid-state pulse modulator has been developed for use in the Plasma Electrode Pockels Cell (PEPC) subsystem in the National Ignition Facility. The MOSFET-switched pulse generator, designed to be a more capable plug-in replacement for the thyratron-switched units currently deployed in NIF, offers unprecedented capabilities including burst-mode operation, pulse width agility and a steady-state pulse repetition frequency exceeding 1 Hz. Capable of delivering requisite fast risetime, 17 kV flattop pulses into a 6 {Omega} load, the pulser employs a modular architecture characteristic of the inductive adder technology, pioneered at LLNL for use in acceleration applications, which keeps primary voltages low (and well within the capabilities of existing FET technology), reduces fabrication costs and is amenable to rapid assembly and quick field repairs

Predicting sudden death in patients with mild to moderate chronic heart failure

Objectives: To explore the relation between non-invasive measures of cardiac function and sudden cardiac death, as well as the development and utility of an index integrating these variables to identify patients at increased risk of this mode of death. Design: UK-HEART (United Kingdom-heart failure evaluation and assessment of risk trial) was a prospective study conducted between December 1993 and April 2000. The study was specifically designed to identify non-invasive markers of death and mode of death among patients with chronic heart failure. Setting: 8 UK general hospitals. Main outcome measures: Death and mode of death. Results: 553 patients aged a mean (SD) of 63 (10) years, in New York Heart Association functional class 2.3 (0.02), recruited prospectively. After 2365 patient-years’ follow up, 201 patients had died (67 suddenly). Predictors of sudden death were greater cardiothoracic ratio, QRS dispersion, QT dispersion corrected for rate (QTc) across leads V1–V6 on the 12 lead ECG, and the presence of non-sustained ventricular tachycardia. The hazard ratio and 95% confidence intervals (CI) of sudden death for a 10% increase in cardiothoracic ratio was 1.43 (95% CI 1.20 to 1.71), for a 10% increase in QRS dispersion 1.11 (95% CI 1.04 to 1.19), for the presence of non-sustained ventricular tachycardia 2.03 (95% CI 1.27 to 3.25), and for a 10% increase in QTc dispersion across leads V1–V6 1.03 (95% CI 1.00 to 1.07) (all p < 0.04). An index derived from these four factors performed well in identifying patients specifically at increased risk of sudden death. Conclusions: Results show that an index derived from three widely available non-invasive investigations has the potential to identify ambulant patients with chronic heart failure at increased risk of sudden death. This predictive tool could be used to target more sophisticated investigations or interventions aimed at preventing sudden death

Micro-fabrication of Carbon Structures by Pattern Miniaturization in Resorcinol-Formaldehyde Gel

A simple and novel method to fabricate and miniaturize surface and sub-surface micro-structures and micro-patterns in glassy carbon is proposed and demonstrated. An aqueous resorcinol-formaldehyde (RF) sol is employed for micro-molding of the master-pattern to be replicated, followed by controlled drying and pyrolysis of the gel to reproduce an isotropically shrunk replica in carbon. The miniaturized version of the master-pattern thus replicated in carbon is about one order of magnitude smaller than original master by repeating three times the above cycle of molding and drying. The micro-fabrication method proposed will greatly enhance the toolbox for a facile fabrication of a variety of Carbon-MEMS and C-microfluidic devices.Comment: 16 pages, 5 figure

Solid-State Modulators for RF And Fast Kickers

As the switching capabilities of solid-state devices increase, these devices are being incorporated into modulator designs for high voltage accelerator applications. Solid-state modulators based on inductive adder circuit topology have demonstrated great versatility with regard to pulse width and pulse repetition rate while maintaining fast pulse rise and fall times. Additionally, these modulators are capable of being scaled to higher output voltage and power levels. An explanation of the basic circuit operation will be presented as well as test data of several different hardware systems

Tailoring 3D single-walled carbon nanotubes anchored to indium tin oxide for natural cellular uptake and intracellular sensing.

The ability to monitor intracellular events in real time is paramount to advancing fundamental biological and clinical science. We present the first demonstration of a direct interface of vertically aligned single-walled carbon nanotubes (VASWCNTs) with eukaryotic cells, RAW 264.7 mouse macrophage cell line. The cells were cultured on indium tin oxide with VASWCNTs. VASWCNTs entered the cells naturally without application of any external force and were shown to sense the intracellular presence of a redox active moiety, methylene blue. The technology developed provides an alluring platform to enable electrochemical study of an intracellular environment

Dilated Cardiomyopathy with Increased SR Ca2+ Loading Preceded by a Hypercontractile State and Diastolic Failure in the α1CTG Mouse

Mice over-expressing the α1−subunit (pore) of the L-type Ca2+ channel (α1CTG) by 4months (mo) of age exhibit an enlarged heart, hypertrophied myocytes, increased Ca2+ current and Ca2+ transient amplitude, but a normal SR Ca2+ load. With advancing age (8–11 mo), some mice demonstrate advanced hypertrophy but are not in congestive heart failure (NFTG), while others evolve to frank dilated congestive heart failure (FTG). We demonstrate that older NFTG myocytes exhibit a hypercontractile state over a wide range of stimulation frequencies, but maintain a normal SR Ca2+ load compared to age matched non-transgenic (NTG) myocytes. However, at high stimulation rates (2–4 Hz) signs of diastolic contractile failure appear in NFTG cells. The evolution of frank congestive failure in FTG is accompanied by a further increase in heart mass and myocyte size, and phospholamban and ryanodine receptor protein levels and phosphorylation become reduced. In FTG, the SR Ca2+ load increases and Ca2+ release following excitation, increases further. An enhanced NCX function in FTG, as reflected by an accelerated relaxation of the caffeine-induced Ca2+ transient, is insufficient to maintain a normal diastolic Ca2+ during high rates of stimulation. Although a high SR Ca2+ release following excitation is maintained, the hypercontractile state is not maintained at high rates of stimulation, and signs of both systolic and diastolic contractile failure appear. Thus, the dilated cardiomyopathy that evolves in this mouse model exhibits signs of both systolic and diastolic failure, but not a deficient SR Ca2+ loading or release, as occurs in some other cardiomyopathic models