1,663 research outputs found
Assessing the potential contribution of excess heat from biogas plants towards decarbonising German residential heating
This paper analyses the current technical potential for utilising excess heat from German biogas plants, in order to supply local settlements through district heating. Based on a survey of around 600 biogas plant operators, the fractions of excess heat in these plants are analysed. A heuristic is developed to match biogas plants (heat sources) with local settlements (sinks) in order to determine a least-cost district heating supply for residential buildings. Two criteria are employed, namely the CO2 abatement costs and the payback period, which represent the macro- and microeconomic perspectives respectively. Based on the survey, a mean fraction of 40% excess heat is determined, which is in agreement with other empirical studies. Extrapolating this fraction to the German biogas plant stock leads to technically feasible CO2 savings of around 2.5 MtCO2/a. Employing the criteria of CO2 abatement costs and payback period yields about 2 MtCO2/a below CO2 abatement costs of 200 €/tCO2 and below a payback period of 9 years respectively. This represents about 0.25% of the total German CO2 emissions in 2016 or around 2.5% of all CO2 in residential buildings. If threshold values of 80 €/tCO2 and 5 years are employed, to reflect the German
government’s suggested external cost of carbon and an expected payback period from an investor’s point of view respectively, the carbon reduction potential is about 0.5 MtCO2 and 0.75 MtCO2 respectively. These potentials are concentrated in around 3,500 of 11,400 municipalities, where district heating from biogas plants could reduce CO2 emissions per capita by an average of 250 kgCO_2/a and cover 12% of the total heating demand
Altersarmut - heute und in der Zukunft
ALTERSARMUT - HEUTE UND IN DER ZUKUNFT
Altersarmut - heute und in der Zukunft / Braun, Reiner (Rights reserved) ( -
In-process evaluation of electrical properties of CIGS solar cells scribed with laser pulses of different pulse lengths
The optimization of laser scribing for the interconnection of CIGS solar cells is a current focus of laser process development. In addition to the geometry of the laser scribes the impact of the laser patterning to the electrical properties of the solar cells has to be optimized with regards to the scribing process and the laser sources. In-process measurements provide an approach for reliable evaluation of the electrical characteristics. In particular, the parallel resistance Rp that was calculated from the measured I-V curves was measured in dependence on the scribing parameters of a short-pulsed ns laser in comparison to a standard ps laser at a wavelength of 1.06 μm. With low pulse overlap of ∼ 20% a reduction of Rp to 2/3 of the initial value has been achieved for ns laser pulses. In comparison to ps laser slightly more defects were observed at the investigated parameter range
The zero-dimensional O(N) vector model as a benchmark for perturbation theory, the large-N expansion and the functional renormalization group
We consider the zero-dimensional O(N) vector model as a simple example to
calculate n-point correlation functions using perturbation theory, the large-N
expansion, and the functional renormalization group (FRG). Comparing our
findings with exact results, we show that perturbation theory breaks down for
moderate interactions for all N, as one should expect. While the
interaction-induced shift of the free energy and the self-energy are well
described by the large-N expansion even for small N, this is not the case for
higher-order correlation functions. However, using the FRG in its one-particle
irreducible formalism, we see that very few running couplings suffice to get
accurate results for arbitrary N in the strong coupling regime, outperforming
the large-N expansion for small N. We further remark on how the derivative
expansion, a well-known approximation strategy for the FRG, reduces to an exact
method for the zero-dimensional O(N) vector model.Comment: 13 pages, 13 figure
Differential proteomics analysis of Frankliniella occidentalis immune response after infection with Tomato spotted wilt virus (Tospovirus)
Tomato spotted wilt virus (TSWV) is mainly vectored by Frankliniella occidentalis Pergande, and it potentially activates the vector's immune response. However, molecular background of the altered immune response is not clearly understood. Therefore, using a proteomic approach, we investigated the immune pathways that are activated in F. occidentalis larvae after 24 h exposure to TSWV. Two-dimensional isoelectric focusing/sodium dodecyl sulfate polyacrylamide gel electrophoresis (2D-IEF/SDS/PAGE) combined with mass spectrometry (MS), were used to identify proteins that were differentially expressed upon viral infection. High numbers of proteins were abundantly expressed in F. occidentalis exposed to TSWV (73%) compared to the non-exposed (27%), with the majority functionally linked to the innate immune system such as: signaling, stress response, defense response, translation, cellular lipids and nucleotide metabolism. Key proteins included: 70 kDa heat shock proteins, Ubiquitin and Dermcidin, among others, indicative of a responsive pattern of the vector's innate immune system to viral infection. © 2016 Elsevier Lt
Thermal Habitat for RNA Amplification and Accumulation
The RNA world scenario posits replication by RNA polymerases. On early Earth, a geophysical setting is required to separate hybridized strands after their replication and to localize them against diffusion. We present a pointed heat source that drives exponential, RNA-catalyzed amplification of short RNA with high efficiency in a confined chamber. While shorter strands were periodically melted by laminar convection, the temperature gradient caused aggregated polymerase molecules to accumulate, protecting them from degradation in hot regions of the chamber. These findings demonstrate a size-selective pathway for autonomous RNA-based replication in a natural non-equilibrium condition
On the dc Magnetization, Spontaneous Vortex State and Specific Heat in the superconducting state of the weakly ferromagnetic superconductor RuSrGdCuO
Magnetic-field changes 0.2 Oe over the scan length in magnetometers that
necessitate sample movement are enough to create artifacts in the dc
magnetization measurements of the weakly ferromagnetic superconductor
RuSrGdCuO (Ru1212) below the superconducting transition
temperature 30 K. The observed features depend on the specific
magnetic-field profile in the sample chamber and this explains the variety of
reported behaviors for this compound below . An experimental procedure
that combines improvement of the magnetic-field homogeneity with very small
scan lengths and leads to artifact-free measurements similar to those on a
stationary sample has been developed. This procedure was used to measure the
mass magnetization of Ru1212 as a function of the applied magnetic field H (-20
Oe H 20 Oe) at and discuss, in conjunction with
resistance and ac susceptibility measurements, the possibility of a spontaneous
vortex state (SVS) for this compound. Although the existence of a SVS can not
be excluded, an alternative interpretation of the results based on the granular
nature of the investigated sample is also possible. Specific-heat measurements
of SrGdRuO (Sr2116), the precursor for the preparation of Ru1212
and thus a possible impurity phase, show that it is unlikely that Sr2116 is
responsible for the specific-heat features observed for Ru1212 at .Comment: 17 pages, 6 figure
Long Tailed Maps as a Representation of Mixed Mode Oscillatory Systems
Mixed mode oscillatory (MMO) systems are known to exhibit some generic
features such as the reversal of period doubling sequences and crossover to
period adding sequences as bifurcation parameters are varied. In addition, they
exhibit a nearly one dimensional unimodal Poincare map with a longtail. We
recover these common features from a general class of two parameter family of
one dimensional maps with a unique critical point that satisfy a few general
constraints that determine the nature of the map. We derive scaling laws that
determine the parameter widths of the dominant windows of periodic orbits
sandwiched between two successive states of RL^k sequence. An example of a two
parameter map with a unique critical point is introduced to verify the
analytical results.Comment: 13 pages and 8 figure
Fluctuations in the quark-meson model for QCD with isospin chemical potential
We study the two-flavor quark-meson (QM) model with the functional
renormalization group (FRG) to describe the effects of collective mesonic
fluctuations on the phase diagram of QCD at finite baryon and isospin chemical
potentials, and . With only isospin chemical potential there is
a precise equivalence between the competing dynamics of chiral versus pion
condensation and that of collective mesonic and baryonic fluctuations in the
quark-meson-diquark model for two-color QCD at finite baryon chemical
potential. Here, finite introduces an additional dimension to the
phase diagram as compared to two-color QCD, however. At zero temperature, the
()-plane of this phase diagram is strongly constrained by the
"Silver Blaze problem." In particular, the onset of pion condensation must
occur at , independent of as long as
stays below the constituent quark mass of the QM model or the liquid-gas
transition line of nuclear matter in QCD. In order to maintain this relation
beyond mean field it is crucial to compute the pion mass from its timelike
correlator with the FRG in a consistent way.Comment: 10 pages, 11 figures; matches published versio
- …