Electrocatalytic Activity of Nanocomposites Containing Carbon Materials

Carbon materials (CM), including various allotropic forms of carbon, such as graphene, nanotubes, fullerenes, and other porous structures, are widely used in the synthesis of catalysts [...

Gold autodeactivation during oxygen electroreduction studied by electrochemical impedance spectroscopy

The deactivation of a polycryst. Au electrode is obsd. during O electroredn. reaction (ORR) in basic medium. At that, the cause of the process is chem. decompn. of the ORR intermediate and blocking of active sites of the electrode surface by hydroxyl radical-like species. The deactivation mechanism is discussed

PtM/CNT (M = Mo, Ni, CoCr) Electrocatalysts with Reduced Platinum Content for Anodic Hydrogen Oxidation and Cathodic Oxygen Reduction in Alkaline Electrolytes

Bimetallic catalysts containing platinum and transition metals (PtM, M = Mo, Ni, CoCr) were synthesized on carbon nanotubes (CNTs) functionalized in an alkaline medium. Their platinum content is 10–15% by mass. PtM/CNTNaOH are active in both the hydrogen oxidation reaction (HOR) and the oxygen reduction reaction (ORR) in alkaline electrolytes. Although catalysts based on a single transition metal are inactive in the HOR, their activity in the cathode process of ORR increases relative to CNTNaOH. When using the rotating ring-disk electrode method for ORR, PtM/CNT showed a high selectivity in reducing oxygen directly to water. In HOR, the PtM/CNT catalyst had an activity comparable to that of a commercial monoplatinum catalyst. The results obtained show that it is possible to use the PtM/CNT catalyst in an alkaline fuel cell both as an anode and as a cathode

Nanocomposite Cathode Catalysts Containing Platinum Deposited on Carbon Nanotubes Modified by O, N, and P Atoms

Platinum deposited on dispersed materials has so far been the most demanded catalyst for creating cathodes for a wide range of electrochemical power sources. This paper sets out to investigate the effect of carbon nanotube (CNT) modification by O, N, and P atoms on the structural, electrocatalytic, and corrosion properties of the as-synthesized monoplatinum catalysts. The investigated Pt/CNTmod catalysts showed an increased electrochemically active platinum surface area and electrical conductivity, as well as an increased catalytic activity in the oxygen reduction reaction (ORR) in alkaline electrolytes. The improved characteristics of Pt/CNT catalysts are explained by alterations in the composition and number of groups, which are formed on the CNT surface, and their electronic structure. By the sum of the main characteristics, Pt/CNTHNO3+N and Pt/CNTHNO3+NP are the most promising catalysts for use as cathode materials in alkaline media

Nanocomposite Cathode Catalysts Containing Platinum Deposited on Carbon Nanotubes Modified by O, N, and P Atoms

Platinum deposited on dispersed materials has so far been the most demanded catalyst for creating cathodes for a wide range of electrochemical power sources. This paper sets out to investigate the effect of carbon nanotube (CNT) modification by O, N, and P atoms on the structural, electrocatalytic, and corrosion properties of the as-synthesized monoplatinum catalysts. The investigated Pt/CNTmod catalysts showed an increased electrochemically active platinum surface area and electrical conductivity, as well as an increased catalytic activity in the oxygen reduction reaction (ORR) in alkaline electrolytes. The improved characteristics of Pt/CNT catalysts are explained by alterations in the composition and number of groups, which are formed on the CNT surface, and their electronic structure. By the sum of the main characteristics, Pt/CNTHNO3+N and Pt/CNTHNO3+NP are the most promising catalysts for use as cathode materials in alkaline media

Glucose-Oxygen Biofuel Cell with Biotic and Abiotic Catalysts: Experimental Research and Mathematical Modeling

The demand for alternative sources of clean, sustainable, and renewable energy has been a focus of research around the world for the past few decades. Microbial/enzymatic biofuel cells are one of the popular technologies for generating electricity from organic substrates. Currently, one of the promising fuel options is based on glucose due to its multiple advantages: high energy intensity, environmental friendliness, low cost, etc. The effectiveness of biofuel cells is largely determined by the activity of biocatalytic systems applied to accelerate electrode reactions. For this work with aerobic granular sludge as a basis, a nitrogen-fixing community of microorganisms has been selected. The microorganisms were immobilized on a carbon material (graphite foam, carbon nanotubes). The bioanode was developed from a selected biological material. A membraneless biofuel cell glucose/oxygen, with abiotic metal catalysts and biocatalysts based on a microorganism community and enzymes, has been developed. Using methods of laboratory electrochemical studies and mathematical modeling, the physicochemical phenomena and processes occurring in the cell has been studied. The mathematical model includes equations for the kinetics of electrochemical reactions and the growth of microbiological population, the material balance of the components, and charge balance. The results of calculations of the distribution of component concentrations over the thickness of the active layer and over time are presented. The data obtained from the model calculations correspond to the experimental ones. Optimization for fuel concentration has been carried out

Membranes Based on Polyvinylidene Fluoride and Radiation-Grafted Sulfonated Polystyrene and Their Performance in Proton-Exchange Membrane Fuel Cells

Proton-exchange membranes based on gamma-irradiated films of PVDF and radiation-grafted sulfonated polystyrene with an ion-exchange capacity of 1.8 meq/g and crosslinking degrees of 0 and 3% were synthesized. A solvent-free, environmentally friendly method of styrene grafting from its aqueous emulsion, with a styrene content of only 5 vol.% was used. Energy dispersive X-ray mapping analysis showed that the grafted sulfonated polystyrene is uniformly distributed throughout the membrane thickness. The obtained materials had a proton conductivity up to 132 mS/cm at 80 °C and a hydrogen permeability of up to 5.2 cm2/s at 30 °C, which significantly exceeded similar values for Nafion®-212 membranes. The resulting membranes exhibited a H2/O2 fuel cell peak power density of up to 0.4 W/cm2 at 65 °C. Accelerated stability tests showed that adding a crosslinking agent could significantly increase the stability of the membranes in the fuel cells. The thermal properties and crystallinity of the membranes were investigated through differential scanning calorimetry and X-ray powder diffraction methods. The conductivity, water uptake, and mechanical properties of the membranes (stress–strain curves) were also characterized

On the Properties of Nafion Membranes Recast from Dispersion in <i>N</i>-Methyl-2-Pyrrolidone

Perfluorosulfonic acid Nafion membranes are widely used as an electrolyte in electrolysis processes and in fuel cells. Changing the preparation and pretreatment conditions of Nafion membranes allows for the optimization of their properties. In this work, a Nafion-NMP membrane with a higher conductivity than the commercial Nafion® 212 membrane (11.5 and 8.7 mS∙cm−1 in contact with water at t = 30 °C) and a comparable hydrogen permeability was obtained by casting from a Nafion dispersion in N-methyl-2-pyrrolidone. Since the ion-exchange capacity and the water uptake of these membranes are similar, it can be assumed that the increase in conductivity is the result of optimizing the Nafion-NMP microstructure by improving the connectivity of the pores and channels system. This leads to a 27% increase in the capacity of the membrane electrode assembly with the Nafion-NMP membrane compared to the Nafion® 212 membrane. Thus, the method of obtaining a Nafion membrane has a great influence on its properties and performance of fuel cells based on them