Amplitude-Multiplexed readout of single photon detectors based on superconducting nanowires

The realization of large-scale photonic circuit for quantum optics experiments at telecom wavelengths requires an increasing number of integrated detectors. Superconductive nanowire single photon detectors (SNSPDs) can be easily integrated on chip and they can efficiently detect the light propagating inside waveguides. The thermal budget of cryostats poses a limit on the maximum number of elements that can be integrated on the same chip due to the thermal impact of the readout electronics. In this paper, we propose and implement a novel scheme able for an efficient reading of several SNSPDs with only one readout port, enabling the realization of photonic circuits with a large number of modes

Photon-number resolving detector based on a series array of superconducting nanowires

We present the experimental demonstration of a superconducting photon number resolving detector. It is based on the series connection of N superconducting nanowires, each connected in parallel to an integrated resistor. The device provides a single voltage readout, proportional to the number of photons absorbed in distinct nanowires. Clearly separated output levels corresponding to the detection of n=1-4 photons are observed in a 4-element detector fabricated from an NbN film on GaAs substrate, with a single-photon system quantum efficiency of 2.6% at the wavelength of 1300nm. The series-nanowire structure is promising in view of its scalability to large photon numbers and high efficiencies.Comment: 12 pages, 6 figure

Ultrasensitive N-photon interferometric autocorrelator

We demonstrate a novel method to measure the Nth-order (N=1, 2, 3, 4) interferometric autocorrelation with high sensitivity and temporal resolution. It is based on the combination of linear absorption and nonlinear detection in a superconducting nanodetector, providing much higher efficiency than methods based on all-optical nonlinearities. Its temporal resolution is only limited by the quasi-particle energy relaxation time, which is directly measured to be in the 20 ps range for the NbN films used in this work. We present a general model of interferometric autocorrelation with these nonlinear detectors and discuss the comparison with other approaches and possible improvements

Superconducting nanowire photon number resolving detector at telecom wavelength

The optical-to-electrical conversion, which is the basis of optical detectors, can be linear or nonlinear. When high sensitivities are needed single-photon detectors (SPDs) are used, which operate in a strongly nonlinear mode, their response being independent of the photon number. Nevertheless, photon-number resolving (PNR) detectors are needed, particularly in quantum optics, where n-photon states are routinely produced. In quantum communication, the PNR functionality is key to many protocols for establishing, swapping and measuring entanglement, and can be used to detect photon-number-splitting attacks. A linear detector with single-photon sensitivity can also be used for measuring a temporal waveform at extremely low light levels, e.g. in long-distance optical communications, fluorescence spectroscopy, optical time-domain reflectometry. We demonstrate here a PNR detector based on parallel superconducting nanowires and capable of counting up to 4 photons at telecommunication wavelengths, with ultralow dark count rate and high counting frequency

Optimal Amplitude Multiplexing of a Series of Superconducting Nanowire Single Photon Detectors

Integrated arrays of Superconducting Nanowire Single Photon Detectors (SNSPDs) have shown capabilities such as Photon Number Resolution, single photon imaging and coincidences detection, and can be effectively used also in other different applications related to quantum optics. The growing complexity of such applications requires the use of multiplexing schemes for the simultaneous readout of different detectors. A simple multiplexing scheme can be realized by arranging a series of SNSPDs elements, shunted by appropriate resistances. The goal of this work is to investigate and optimize this scheme, developing a general method able to identify the optimal sets of shunting resistences for any different application. The methodology obtained is very general, and can be extended to other detection systems

Nidogen-1 is a novel extracellular ligand for the NKp44 activating receptor

The release of soluble ligands of activating Natural Killer (NK) cell receptors may represent a regulatory mechanism of NK cell function both in physiologic and in pathologic conditions. Here, we identified the extracellular matrix protein Nidogen-1 (NID1) as a ligand of NKp44, an important activating receptor expressed by activated NK cells. When released as soluble molecule, NID1 regulates NK cell function by modulating NKp44-induced IFN-\u3b3 production or cytotoxicity. In particular, it also modulates IFN-\u3b3 production induced by Platelet-Derived Growth Factor (PDGF)-DD following NKp44 engagement. We also show that NID1 may be present at the cell surface. In this form or when bound to a solid support (bNID1), NID1 fails to induce NK cell cytotoxicity or cytokine release. However, analysis by mass spectrometry revealed that exposure to bNID1 can induce in human NK cells relevant changes in the proteomic profiles suggesting an effect on different biological processes

Waveguide single-photon detectors for integrated quantum photonic circuits

The generation, manipulation and detection of quantum bits (qubits) encoded on single photons is at the heart of quantum communication and optical quantum information processing. The combination of single-photon sources, passive optical circuits and single-photon detectors enables quantum repeaters and qubit amplifiers, and also forms the basis of all-optical quantum gates and of linear-optics quantum computing. However, the monolithic integration of sources, waveguides and detectors on the same chip, as needed for scaling to meaningful number of qubits, is very challenging, and previous work on quantum photonic circuits has used external sources and detectors. Here we propose an approach to a fully-integrated quantum photonic circuit on a semiconductor chip, and demonstrate a key component of such circuit, a waveguide single-photon detector. Our detectors, based on superconducting nanowires on GaAs ridge waveguides, provide high efficiency (20%) at telecom wavelengths, high timing accuracy (60 ps), response time in the ns range, and are fully compatible with the integration of single-photon sources, passive networks and modulators.Comment: 11 pages, 4 figure

Superconducting nanowire photon-number-resolving detector at telecommunication wavelengths

Optical-to-electrical conversion, which is the basis of the operation of optical detectors, can be linear or nonlinear. When high sensitivities are needed, single-photon detectors are used, which operate in a strongly nonlinear mode, their response being independent of the number of detected photons. However, photon-number-resolving detectors are needed, particularly in quantum optics, where n-photon states are routinely produced. In quantum communication and quantum information processing, the photon-numberre-solving functionality is key to many protocols, such as the implementation of quantum repeaters(1) and linear- optics quantum computing(2). A linear detector with single-photon sensitivity can also be used for measuring a temporal waveform at extremely low light levels, such as in long-distance optical communications, fluorescence spectroscopy and optical time-domain reflectometry. We demonstrate here a photon-number-resolving detector based on parallel superconducting nanowires and capable of counting up to four photons at telecommunication wavelengths, with an ultralow dark count rate and high counting frequency