15 research outputs found
Recent advances in upscalable wet methods and ink formulations for printed electronics
This review deals with the use of solution processing approaches for organic electronics with a focus on material ink formulations as well as on their applicability. The solution processing techniques include methods like gravure printing, screen printing and ink-jet printing. Basic principles of each approach are understood and fundamental correlations between material (metals, semiconductors, and dielectrics) ink properties and final device performances can be drawn. Nevertheless, solution processing methods have the potential to evolve as the most promising tools in organic device fabrication techniques and have already been applied successfully in the fields of organic thin film transistors, solar cells and biosensing devices
Fabrication and characterisation of ZnO nanostructures from nanoscale building blocks to hybrid nanomaterials - towards emerging technologies in sensing applications
Ultrathin and nanostructured ZnO-based films for fluorescence biosensing applications
The fluorescence-based sensing capability of ultrathin ZnO-SiO(2) nanoplatforms, deposited by an integrated approach of colloidal lithography and metal organic chemical vapor deposition, has been investigated upon adsorption of fluorescein-labeled albumin, used as model analyte biomolecule. The protein immobilization process after spontaneous adsorption/desorption significantly enhances the green emission of the different ZnO-based films, as evidenced by scanning confocal microscopy, corresponding to a comparable protein coverage detected by X-ray photoelectron spectroscopy. Moreover, experiments of fluorescence recovery after photobleaching evidence that the protein lateral diffusion at the biointerface is affected by the chemical and/or topographical patterning of hybrid ZnO-SiO(2) surfaces. The used approach is very promising for biomolecular detection applications of these ZnO-SiO(2) nanoplatforms, by simple sizing of the 2D vs. 3D patterning design, which in turn is accomplished by the fine tuning of the integrated colloidal lithography-chemical vapor deposition processes. (C) 2011 Elsevier Inc. All rights reserved
ZnO nanorod arrays fabrication via chemical bath deposition: Ligand concentration effect study
A new ligand, N, N, N', N'-tetramethylethylenediamine, has been used to grow ZnO nanorods on silicon substrates via a two steps approach. A preliminary seeding on silicon substrates has been combined with chemical bath deposition using a Zinc acetate - N, N, N', N'-tetramethylethylenediamine aqueous solution. The used diamino ligand has been selected as Zn(2+) complexing agent and the related hydrolysis generates the reacting ions (Zn(2-) and OH(-)) responsible for the ZnO growth. The seed layer has been annealed at low temperature (<200 degrees C) and the ZnO nanorods have been grown on this ZnO amorphous layer. There is experimental evidence that the ligand concentration (ranging from 5 to 50 mM) strongly affects the alignment of ZnO nanorods on the substrate, their lateral dimension and the related surface density. Length and diameter of ZnO nanorods increase upon increasing the ligand concentration, while the nanorod density decreases. Even more important, it has been demonstrated, as proof of concept, that chemical bath deposition can be usefully combined with colloidal lithography for selective ZnO nanorod deposition Thus, by patterning the ZnO seeded substrate with polystyrene microsphere colloidal lithography, regular Si hole arrays, spatially defined by hexagonal ZnO nanorods, have been successfully obtained. (C) 2010 Elsevier Ltd. All rights reserved
Integration of Metal Organic Chemical Vapour Deposition and Wet Chemical Techniques to Obtain Highly Ordered Porous ZnO Nanoplatforms
Large-area, highly ordered ZnO micropores-arrays consisting of ZnO nanotubes delimited by ZnO nanorods have been successfully fabricated and tested for protein sensing applications. ZnO seed layers have been deposited by Metal Organic Chemical Vapour Deposition and readily patterned by Colloidal Lithography to attain ZnO nanorods growth at selective sites by Chemical Bath Deposition. The used synthetic approach has been proven effective for the easy assembly of ZnO nanoplatforms into high-density arrays. Both patterned and unpatterned ZnO nanorods have been morphologically and compositionally characterised and, thus, tested for model studies of protein mobility at the interface. The patterned layers, having a higher contribution of surface polar moieties than the corresponding unpatterned surfaces, exhibit a reduced lateral diffusion of the adsorbed protein. This evidence is related to the intrinsic porous nature of the ZnO hemispherical arrays characterised by a nanotube-nanorod hybrid networks. The present study gives a great impetus to the fabrication of tunable ZnO nanoplatforms having multiple morphologies and exceptionally high surface areas suitable for application in sensing devices
Effects of Metal-Organic Chemical Vapour Deposition grown seed layer on the fabrication of well aligned ZnO nanorods by Chemical Bath Deposition
Well aligned, long and uniform ZnO nanorods have been reproducibly fabricated adopting a two-steps Metal-Organic Chemical Vapour Deposition (MOCVD) and Chemical Bath Deposition (CBD) fabrication approaches. Thin (<100 nm) ZnO buffer layers have been seeded on silicon substrates by MOCVD and ZnO layers have been subsequently grown, in form of well textured nanorods, using CBD. It has been found that the structure and thickness of the seed layer strongly influence the final morphology and the crystal texturing of ZnO nanorods as well as the CBD growth rate. There is, in addition, a strong correlation between morphologies of CBD grown ZnO nanorods and those of the seed layer underneath. Thus, nanorods deposited over low temperature MOCVD buffer layers are less homogeneous in lateral dimensions and poorly vertically oriented. On the contrary, higher temperature nano-dimensional ZnO seeds favour the CBD growth of almost mono-dimensional homologue nanorods, with an adequate control of the lateral transport of matter. The nanorod aspect ratio values decrease upon increasing the deposition temperatures of the seed layers. Moreover, the nanorods length can be tailored either by adjusting the CBD growth time or by changing concentration of the N,N,N',N'-tetramethylethylenediamine ligand used in the CBD process. In particular, at high concentrations, the CBD process is faster with a greater global aspect ratio in agreement with a preferential one-dimensional growth of the ZnO nanostructures. Finally, these ZnO nanorod arrays possess good optical quality in accordance to the photoluminescence properties
Spectroscopic and Theoretical Study of the Grafting Modes of Phosphonic Acids on ZnO Nanorods
Metal oxides are versatile substrates for the design of a wide range of SAM-based organic-inorganic materials among which ZnO nanostructures modified with phosphonic SAM are promising semiconducting systems for applications in technological fields such as biosensing, photonics, and field-effect transistors (FET). Despite previous studies reported on various successful grafting approaches, issues regarding preferred anchoring modes of phosphonic acids and the role of a second reactive group (i.e., a carboxylic group) are still a matter of controversial interpretations. This paper reports on an experimental and theoretical study on the functionalization of ZnO nanorods with monofunctional alkylphosphonic and bifunctional carboxyalkylphosphonic acids. X-ray photoelectron and infrared spectroscopies have been combined with DFT modeling to explain and understand the interactions that drive the surface anchoring of phosphonic acids on ZnO surface. It was found that both monofunctional and bifunctional acids anchor on ZnO through a multidentate bonding which involves both P=O and P-O moieties of the phosphonic group. Moreover, anchored bifunctional acids bend to the surface, promoting a further interaction between surface hydroxyl groups and carboxylic terminations. This secondary interaction can be limited by increasing the surface density of the anchored molecules
On the Interaction between 1D Materials and Living Cells
One-dimensional (1D) materials allow for cutting-edge applications in biology, such as single-cell bioelectronics investigations, stimulation of the cellular membrane or the cytosol, cellular capture, tissue regeneration, antibacterial action, traction force investigation, and cellular lysis among others. The extraordinary development of this research field in the last ten years has been promoted by the possibility to engineer new classes of biointerfaces that integrate 1D materials as tools to trigger reconfigurable stimuli/probes at the sub-cellular resolution, mimicking the in vivo protein fibres organization of the extracellular matrix. After a brief overview of the theoretical models relevant for a quantitative description of the 1D material/cell interface, this work offers an unprecedented review of 1D nano- and microscale materials (inorganic, organic, biomolecular) explored so far in this vibrant research field, highlighting their emerging biological applications. The correlation between each 1D material chemistry and the resulting biological response is investigated, allowing to emphasize the advantages and the issues that each class presents. Finally, current challenges and future perspectives are discussed
Printing ZnO Inks: From Principles to Devices
Solution-based printing approaches permit digital designs to be converted into physical objects by depositing materials in a layer-by-layer additive fashion from microscale to nanoscale resolution. The extraordinary adaptability of this technology to different inks and substrates has received substantial interest in the recent literature. In such a context, this review specifically focuses on the realization of inks for the deposition of ZnO, a well-known wide bandgap semiconductor inorganic material showing an impressive number of applications in electronic, optoelectronic, and piezoelectric devices. Herein, we present an updated review of the latest advancements on the ink formulations and printing techniques for ZnO-based nanocrystalline inks, as well as of the major applications which have been demonstrated. The most relevant ink-processing conditions so far explored will be correlated with the resulting film morphologies, showing the possibility to tune the ZnO ink composition to achieve facile, versatile, and scalable fabrication of devices of different natures
ACID-BASE INTERACTIONS AND THEIR ROLE IN FORECASTING OF POLYMER COMPOSITES ADHESION PROPERTIES
Acid-base properties of wide range of polymers and adhesion systems based on polymers, polymer composites and metals were investigated. Composite materials based on high and low density polyethylenes, ethylene copolymers, other carbochain and heterochain polymers, synthetic rubber and their based on composites, epoxy composites, cured with a wide range of curing agents were used as adhesives. By using the contact angle of test liquids the values of the dispersion, acid-base, acid and base components of the surface free energy were calculated and the acidity parameter was estimated by means of van Oss-Chaudhury-Good and E. Berger methods respectively. Effect of composition on acidity and basicity of polymer composites was shown, and also addressed modification in order of adhesion enhancement was studied. Above mentioned parameters were also obtained for a range of metal surfaces, used in adhesion technology. Adhesion properties dependence on reduced acidity parameter, corresponding to absolute difference in acidity parameters of adhesive and adherend, was shown and its mathematical function was suggested. It was shown that acidity parameter estimated using E.Berger method gives an opportunity to forecast adhesion interaction in designing of certain coating systems and other adhesion compounds and that it is a good method to estimate adhesion properties of polymer composite-metal compounds