2,149 research outputs found
Charmonium properties from lattice QCD + QED: hyperfine splitting, leptonic width, charm quark mass and
We have performed the first lattice QCD computations of the
properties (masses and decay constants) of ground-state charmonium mesons. Our
calculation uses the HISQ action to generate quark-line connected two-point
correlation functions on MILC gluon field configurations that include
quark masses going down to the physical point, tuning the quark mass from
and including the effect of the quark's electric charge
through quenched QED. We obtain (connected) =
120.3(1.1) MeV and interpret the difference with experiment as the impact on
of its decay to gluons, missing from the lattice calculation. This
allows us to determine =+7.3(1.2) MeV,
giving its value for the first time. Our result of 0.4104(17)
GeV, gives =5.637(49) keV, in agreement
with, but now more accurate than experiment. At the same time we have improved
the determination of the quark mass, including the impact of quenched QED
to give = 0.9841(51) GeV. We have also used
the time-moments of the vector charmonium current-current correlators to
improve the lattice QCD result for the quark HVP contribution to the
anomalous magnetic moment of the muon. We obtain , which is 2.5 higher than the value derived using moments
extracted from some sets of experimental data on . This value for includes our determination of
the effect of QED on this quantity, .Comment: Added extra discussion on QED setup, some new results to study the
effects of strong isospin breaking in the sea (including new Fig. 1) and a
fit stability plot for the hyperfine splitting (new Fig. 7). Version accepted
for publication in PR
The British labour market 1855-1939 : a quantitative approach
This thesis examines the pattern and level of unemployment in the British Economy from 1855 to 1913. The structure of and variations in supply and demand for labour and unemployment are examined using data mostly from published sources. Various models are discussed and tested on the data using the standard techniques of regression analysis.
It is found that the pre first world war labour market can be described as free of major institutional and structural distortions, adjusting via a series of short run equilibria to a long run equilibrium. It is argued that the interwar labour market should be depicted as failing to adjust and suffering continuous excess supply of labour. In this context, the supply side role for the effect of unemployment benefits is limited and the mal-distribution of unemployment across industries and regions is a consequence, rather than a cause of unemployment. It is argued that, under such conditions, there would have been scope for demand management policies and these would have involved both public spending and exchange rate policies
An Electrochemically-mediated Gas Separation Process for Carbon Abatement
This work describes a promising alternative to conventional thermal processes for absorber/desorber processing of for removal of CO[subscript 2] from flue gas streams at fossil fuel fired power plants. Our electrochemically-mediated amine regeneration (EMAR) process offers the advantages of an electrical system coupled with the desirable high output purities typical of amine sorbents that are difficult to achieve with most electric systems such as pressure-swing sorption, membrane separation, and oxy-fuel combustion. Preliminary experimental results are presented that demonstrate the feasibility of using ethylenediamine as the CO[subscript 2] sorbent and copper electro-cycling to isothermally modulate the amine affinity for CO[subscript 2]. Cupric ions entirely deactivate ethylenediamine at a ratio of 2:1 diamine to copper. Open-circuit potential measurements at 50°C indicate the required energy to desorb CO[subscript 2] and regenerate the ethylenediamine is 18 kJ/mole CO[subscript 2] under open-circuit conditions. Kinetic over-potentials are sufficiently low to ensure acceptable energy losses. Lower energies can be achieved by increasing the temperature or by changing the amine.Siemens Corporation (CKI Research Fund)United States. Advanced Research Projects Agency-Energy (Research Grant DE-AR0000083
Post-combustion carbon dioxide capture using electrochemically mediated amine regeneration
Electrochemically mediated amine regeneration is a new post-combustion capture technology with the potential to exploit the excellent removal efficiencies of thermal amine scrubbers while reducing parasitic energy losses and capital costs. The improvements result from the use of an electrochemical stripping cycle, in lieu of the traditional thermal swing, to facilitate CO[subscript 2] desorption and amine regeneration; metal cations generated at an anode react with the amines, displacing the CO[subscript 2], which is then flashed off, and the amines are regenerated by subsequent reduction of the metal cations in a cathode cell. The advantages of such a process include higher CO[subscript 2] desorption pressures, smaller absorbers, and lower energy demands. Several example chemistries using different polyamines and copper are presented. Experimental results indicate an open-circuit efficiency of 54% (15 kJ per mole CO[subscript 2]) is achievable at the tested conditions and models predict that 69% efficiency is possible at higher temperatures and pressures. A bench scale system produced 1.6 mL min[superscript −1] CO[subscript 2] while operating at 0.4 volts and 42% Faradaic efficiency; this corresponds to a work of less than 100 kJ per mole.United States. Advanced Research Projects Agency-Energy (Grant DE-AR0000083
Correlating Gene Transfection Efficiency and the Physical Properties of Various Cationic Poly(methacrylate) Systems
Transfection efficiencies of several polymeric gene carriers were compared and correlated quantitatively to the amounts of cellular accumulation of plasmid DNA and to the expression of mRNA by quantitative real time PCR. Three cationic methacrylate polymer systems with similar chemical structure were used in this study, namely: poly(dimethylamino)ethyl methacrylate (PDMA) homopolymer, PEO-b-PDMA copolymer and PEO-b-poly(diethylamino)ethyl methacrylate (PEO-b-PDEA) copolymer. Despite their similar chemical structures, their transfection efficiencies were significantly different. PEO-b-PDEA copolymer was significantly less efficient as gene carrier compared to both PDMA and PEO-b-PDMA systems. Results from quantitative real-time polymerase chain reaction (real-time PCR), cytotoxicity and Zeta potential measurements showed correlations between the physical properties of the polymers and the efficiencies of cellular uptake of the transgene and transfections. In the case of PEO-b-PDEA system, cytotoxicity was due primarily to the excess polymers that did not participate in the DNA binding. In addition, the inability of the polymer/DNA complexes to interact with cell effectively was identified as the main barrier for high efficiency of transfection. This study demonstrated that the use of quantitative real-time PCR in combination with other physical characterization techniques can provide greater insights into the transfection barrier at different cellular levels.Singapore-MIT Alliance (SMA
Electrochemically mediated separation for carbon capture
Carbon capture technology has been proposed as an effective approach for the mitigation of anthropogenic CO[subscript 2] emissions. Thermal-swing separation technologies based on wet chemical scrubbing show potential for facilitating CO[subscript 2] capture at industrial-scale carbon emitters; however, the total operational and capital costs resulting from the high energy consumption are prohibitive for their implementation. Electrochemically mediated processes are proposed to be the next generation of CO[subscript 2] separation technology that can enable carbon capture to be a more viable option for carbon mitigation in the near future. This technology utilizes electrochemically active sorbents that undergo significant changes in their molecular affinity for CO[subscript 2] molecules as they progress through an electrochemical cycle. This nearly isothermal separation process consumes electrical energy to facilitate effective CO[subscript 2] capture and regeneration processes under more benign conditions of sorption and desorption than in traditional continuous wet-scrubber operations. This electrically driven separation process has the potential to significantly reduce the difficulty of retrofitting CO[subscript 2] capture units to existing fossil fuel-fired power generators. The ease of installing an electrically driven separation system would also allow its application to other industrial carbon emitters. The design of such a system, however, requires careful consideration since it involves both heterogeneous electrochemical activation/deactivation of sorbents and homogeneous complexation of the activated sorbents with CO[subscript 2] molecules. Optimization of the energy efficiency requires minimizing the irreversibility associated with these processes. In this study, we use a general exergy analysis to evaluate the minimum thermodynamic work based on the system design and the electrochemical parameters of quinodal redox-active molecules. Using this thermodynamic framework, our results suggest that the proposed technology could capture CO[subscript 2] from a dilute post-combustion flue gas and regenerate CO[subscript 2] at 1 bar with high efficiency, if a two-stage design is effectively implemented.Siemens Corporation (Massachusetts Institute of Technology. Center of Knowledge Interchange Project Fund
Association Behavior of Biotinylated and Non-Biotinylated PolyEthylene Oxide-b-Poly(2-(Diethylamino)Ethyl Methacrylate)
Biotinylated and non-biotinylated copolymers of ethylene oxide (EO) and 2-(diethylamino)ethyl methacrylate (DEAEMA) were synthesized by the atom transfer radical polymerization technique (ATRP). The chemical compositions of the copolymers as determined by NMR are represented by PEO₁₁₃PDEAEMA₇₀ and biotin-PEO₁₀₄PDEAEMA₉₃ respectively. The aggregation behavior of these polymers in aqueous solutions at different pHs and ionic strengths was studied using a combination of potentiometric titration, dynamic light scattering (DLS), static light scattering (SLS), and transmission electron microscopy (TEM). Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers form micelles at high pH with hydrodynamic radii (Rh) of about 19 and 23 nm, respectively. At low pH, the copolymers are dispersed as unimers in solution with Rh of about 6-7 nm. However, at a physiological salt concentration (cs) of about 0.16M NaCl and a pH of 7-8, the copolymers form large loosely packed Guassian chains, which were not present at the low cs of 0.001M NaCl. The critical micelle concentrations (CMC) and the cytotoxicity of the copolymers were investigated to determine a suitable polymer concentration range for future biological applications. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers possess identical CMC values of about 0.0023 mg/g, while the cytotoxicity test indicated that the copolymers are not toxic up to 0.05mg/g (> 83% cell survival at this concentration).Singapore-MIT Alliance (SMA
- …