5 research outputs found
Synthesis and Formation Mechanism of Colloidal Janus-Type Cu2 -xS/CuInS2Heteronanorods via Seeded Injection
Colloidal heteronanocrystals allow for the synergistic combination of properties of different materials. For example, spatial separation of the photogenerated electron and hole can be achieved by coupling different semiconductors with suitable band offsets in one single nanocrystal, which is beneficial for improving the efficiency of photocatalysts and photovoltaic devices. From this perspective, axially segmented semiconductor heteronanorods with a type-II band alignment are particularly attractive since they ensure the accessibility of both photogenerated charge carriers. Here, a two-step synthesis route to Cu2-xS/CuInS2 Janus-type heteronanorods is presented. The heteronanorods are formed by injection of a solution of preformed Cu2-xS seed nanocrystals in 1-dodecanethiol into a solution of indium oleate in oleic acid at 240 °C. By varying the reaction time, Janus-type heteronanocrystals with different sizes, shapes, and compositions are obtained. A mechanism for the formation of the heteronanocrystals is proposed. The first step of this mechanism consists of a thiolate-mediated topotactic, partial Cu+ for In3+ cation exchange that converts one of the facets of the seed nanocrystals into CuInS2. This is followed by homoepitaxial anisotropic growth of wurtzite CuInS2. The Cu2-xS seed nanocrystals also act as sacrificial Cu+ sources, and therefore, single composition CuInS2 nanorods are eventually obtained if the reaction is allowed to proceed to completion. The two-stage seeded growth method developed in this work contributes to the rational synthesis of Cu2-xS/CuInS2 heteronanocrystals with targeted architectures by allowing one to exploit the size and faceting of premade Cu2-xS seed nanocrystals to direct the growth of the CuInS2 segment
Copper sulfide derived nanoparticles supported on carbon for the electrochemical reduction of carbon dioxide
The electrocatalytic reduction of CO2 to produce sustainable fuels and chemicals is attracting great attention. Cu-based catalysts can lead to the production of a range of different molecules, and interestingly the product selectivity strongly depends on the preparation history, although it is not fully understood yet why. We report a novel strategy that allowed us to prepare Cu nanoparticle on carbon catalysts with similar morphologies, but prepared by in-situ reduction of either supported CuS, Cu2S or CuO nanoparticles. For the first time the evolution of the Cu species was followed under CO2 and H+ reduction conditions using in-situ X-ray absorption spectroscopy. Excellent electrochemical contact between the Cu-based nanoparticles, the carbon support and the carbon-paper substrate was observed, resulting in metallic Cu as the predominant phase under typical electrochemical CO2 reduction conditions. Even covering less than 4% of the H2 producing carbon support with Cu-sulfide derived nanoparticles allowed to steer the selectivity to a maximum of 12% Faradaic efficiency for the production of formate. Clear differences between the catalysts derived from CuS, Cu2S or CuO nanoparticles were observed, which was ascribed to the presence of residual sulfur in the catalysts
Copper sulfide derived nanoparticles supported on carbon for the electrochemical reduction of carbon dioxide
The electrocatalytic reduction of CO2 to produce sustainable fuels and chemicals is attracting great attention. Cu-based catalysts can lead to the production of a range of different molecules, and interestingly the product selectivity strongly depends on the preparation history, although it is not fully understood yet why. We report a novel strategy that allowed us to prepare Cu nanoparticle on carbon catalysts with similar morphologies, but prepared by in-situ reduction of either supported CuS, Cu2S or CuO nanoparticles. For the first time the evolution of the Cu species was followed under CO2 and H+ reduction conditions using in-situ X-ray absorption spectroscopy. Excellent electrochemical contact between the Cu-based nanoparticles, the carbon support and the carbon-paper substrate was observed, resulting in metallic Cu as the predominant phase under typical electrochemical CO2 reduction conditions. Even covering less than 4% of the H2 producing carbon support with Cu-sulfide derived nanoparticles allowed to steer the selectivity to a maximum of 12% Faradaic efficiency for the production of formate. Clear differences between the catalysts derived from CuS, Cu2S or CuO nanoparticles were observed, which was ascribed to the presence of residual sulfur in the catalysts.ChemE/Materials for Energy Conversion & Storag
Synthesis and Formation Mechanism of Colloidal Janus-Type Cu2 -xS/CuInS2Heteronanorods via Seeded Injection
Colloidal heteronanocrystals allow for the synergistic combination of properties of different materials. For example, spatial separation of the photogenerated electron and hole can be achieved by coupling different semiconductors with suitable band offsets in one single nanocrystal, which is beneficial for improving the efficiency of photocatalysts and photovoltaic devices. From this perspective, axially segmented semiconductor heteronanorods with a type-II band alignment are particularly attractive since they ensure the accessibility of both photogenerated charge carriers. Here, a two-step synthesis route to Cu2-xS/CuInS2 Janus-type heteronanorods is presented. The heteronanorods are formed by injection of a solution of preformed Cu2-xS seed nanocrystals in 1-dodecanethiol into a solution of indium oleate in oleic acid at 240 °C. By varying the reaction time, Janus-type heteronanocrystals with different sizes, shapes, and compositions are obtained. A mechanism for the formation of the heteronanocrystals is proposed. The first step of this mechanism consists of a thiolate-mediated topotactic, partial Cu+ for In3+ cation exchange that converts one of the facets of the seed nanocrystals into CuInS2. This is followed by homoepitaxial anisotropic growth of wurtzite CuInS2. The Cu2-xS seed nanocrystals also act as sacrificial Cu+ sources, and therefore, single composition CuInS2 nanorods are eventually obtained if the reaction is allowed to proceed to completion. The two-stage seeded growth method developed in this work contributes to the rational synthesis of Cu2-xS/CuInS2 heteronanocrystals with targeted architectures by allowing one to exploit the size and faceting of premade Cu2-xS seed nanocrystals to direct the growth of the CuInS2 segment
Copper sulfide derived nanoparticles supported on carbon for the electrochemical reduction of carbon dioxide
The electrocatalytic reduction of CO2 to produce sustainable fuels and chemicals is attracting great attention. Cu-based catalysts can lead to the production of a range of different molecules, and interestingly the product selectivity strongly depends on the preparation history, although it is not fully understood yet why. We report a novel strategy that allowed us to prepare Cu nanoparticle on carbon catalysts with similar morphologies, but prepared by in-situ reduction of either supported CuS, Cu2S or CuO nanoparticles. For the first time the evolution of the Cu species was followed under CO2 and H+ reduction conditions using in-situ X-ray absorption spectroscopy. Excellent electrochemical contact between the Cu-based nanoparticles, the carbon support and the carbon-paper substrate was observed, resulting in metallic Cu as the predominant phase under typical electrochemical CO2 reduction conditions. Even covering less than 4% of the H2 producing carbon support with Cu-sulfide derived nanoparticles allowed to steer the selectivity to a maximum of 12% Faradaic efficiency for the production of formate. Clear differences between the catalysts derived from CuS, Cu2S or CuO nanoparticles were observed, which was ascribed to the presence of residual sulfur in the catalysts