Lattice deformation in an axially strained BiSrCaCuO/Ag tape conductor investigated by X-ray diffraction

The lattice deformation of a Bi-2212/Ag tape conductor is investigated as a function of an externally applied strain at 300 K. This macroscopic strain is applied in the same direction (¿axial¿) as where the current is normally passed through the conductor. A small but significant shift is observed in the position of the diffraction peak. In a limited strain regime this shift is proportional to the applied strain. The deformation of the c-axis that corresponds to the observed peak shift can be described well with an elastic grain deformation. For tensile axial strains above 0.2% and below ¿0.1% strain, the c-axis deformation is limited to an almost constant value. These two limits in the elastic behaviour divide the axial strain range into three regimes. A good correlation with the axial strain dependence of the critical current at 77 K, is obtained when the thermal contraction is taken into account. In the central strain range, where an elastic lattice deformation is observed, the critical current remains almost constant. Any tensile or compressive deformation that exceeds the elastic limits causes a more severe and irreversible reduction of the critical current

Strain Effect in MgB2/Stainless Steel Superconducting Tape

The influence of mechanical strain on the critical current (Ic) is investigated for MgB2/stainless steel (SUS316) superconducting tapes. The tapes are fabricated by using 'powder in tube' method and deformation process without any heat treatment. The tensile axial strain along tape length is successfully induced to the sample by using a U-shape holder made of stainless steel (SUS304). Two samples are examined at 4.2 K in 5 T (B is applied perpendicular to the tape surface). While the initial Ic at zero external strain state (Ic0) varies (30.4 and 33.3 A), normalized Ic (Ic/Ic0) vs. external strain relations fall on the same curve. Linear increase of Ic is observed from zero external strain state to 0.5% strain (107% of Ic0). Rapid and large degradation occurs at the strain exceeding 0.4-0.5%. High durability against stress can be expected for MgB2/stainless steel superconducting tapes.Comment: 3 pages including 2 figures, submitted to Physica

Analysis of AC loss in superconducting power devices calculated from short sample data

A method to calculate the AC loss of superconducting power devices from the measured AC loss of a short sample is developed. In coils and cables the magnetic field varies spatially. The position dependent field vector is calculated assuming a homogeneous current distribution. From this field profile and the transport current, the local AC loss is calculated. Integration over the conductor length yields the AC loss of the device. The total AC loss of the device is split up in different components. Magnetization loss, transport current loss and the loss due to the combined action of field and current all contribute to the AC loss of the device. Because ways to reduce the AC loss depend on the loss mechanism it is important to know the relative contribution of each component. The method is demonstrated on a prototype transformer coil wound from Bi/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub x//Ag superconducting tape. Differences between the model assumptions and devices are pointed out. Nevertheless, within the uncertainty margins the calculated AC loss is in agreement with the measured loss of the coil

Compressive and tensile axial strain reduced critical currents in Bi-2212 conductors

Mono and multifilamentary wires of BSCCO-2212 in Ag matrix are investigated in an axial strain experiment. The superconducting samples are soldered to a substrate that is bend in order to achieve a compressive or tensile axial strain. The I/sub c/-strain dependence is measured in magnetic fields up to 16 T at 4.2 K and the strain is varied from -2% to +1.2%. In these Bi-2122 samples any strain-induced I/sub c/ reduction is irreversible. Moreover a significant rise in I/sub c/ was never observed after changing the strain. Special attention is paid to the tensile axial strain regime (0 to 0.4%). A small but significant reduction in I/sub c/ is found in this case. The strain behaviour of these wires indicates that the I/sub c/ reduction is due to fractures in the superconducting filament

Toward an accurate scaling relation for the critical current in niobium-tin conductors

Until a few years ago, a set of equations commonly referred to as the Summers relations gave the most accurate description of the critical current in Nb/sub 3/Sn conductors as a function of applied field, temperature and axial strain. Although highly empirical, they describe reasonably well the critical current data of past Nb/sub 3/Sn conductors. New data from various types of Nb/sub 3/Sn conductors, as well as recent analysis of the ITER CS model coil results reveal however, that this description lacks the precision, required to correlate the conductor data to the model coil results. This discrepancy, attributed to the highly empirical background for the relations, manifests itself mainly in the strain- and temperature dependence. The development of an alternative, more accurate description of the behavior of the critical current, starting from a more fundamental description of the strain dependence, has been initiated. At the moment, the development concentrates around the improvement of the temperature dependency relations to achieve a better accuracy of the overall descriptions, especially in the high temperature region

Scaling of the critical current in ITER type niobium-tin superconductors in relation to the applied field, temperature and uni-axial applied strain

The three dimensional surface of the critical current density versus field and temperature Jc(B,T) of niobium-tin is a function of the strain state of the superconductor. A brief review of literature on this subject is presented. The Jc(B) function is described by the relations for flux pinning. The temperature and strain dependencies are added to this relation, This results in a unifying scaling law for A15 materials, which is verified for different niobium-tin conductors with respect to all the relevant variables, i.e. field, temperature and uni-axial strain. Nb3Sn conductors from 9 manufacturers are measured in the frame work of the third ITER benchmark tests on critical current. The investigated ranges are: applied field from 7 to 13 T, temperature from 4.2 to 8 K and applied strain from -0.4 to +0.8%. Special attention is paid to the region of compressive axial strain, which is the most relevant state of strain for superconductors under thermal compression in practical application

Calculation of the Critical Current Reduction in a Brittle Round Multifilamentary Wire due to External Forces

A simple model is presented that can describe the electro-mechanical state of a multifilamentary wire. An elastic cylinder model is used to derive the strain state analytically. Axial and transverse forces came a position dependent critical current density in the wire. The integral critical current of such a wire is calculated. The effect of two different parameters, the hydrostatic and the deviatoric strain, on the critical current is compared. The critical current reduction of a model wire due to various external loads in a Nb 3Sn wire is analysed. Finally the position of the superconducting filaments is considere

Small and repetitive axial strain reducing the critical current in BSCCO/Ag superconductors

The critical current in two types of axially deformed BSCCO/Ag tape conductors is investigated. An Ic reduction is observed for small axial strains (ranging from 0 to 0.3%) with a characteristic slope dic/d&epsiv;=-5±1 (relative Ic, change per relative change in length). In the case of an axial compression there is a more pronounced Ic reduction. For small axial strains (<0.3%) a certain reversible change in Ic is observed. This reversible behaviour occurs in combination with an irreversible reduction that increases when the number of strain cycles is increased. The reversible part of the Ic change remains for a large number of strain cycles (>10000) and has a similar negative slope for both compressive and tensile strains. It is proposed that the reversible Ic change is correlated to a non-hydrostatic lattice deformation. The Ic versus strain behaviour is in good agreement with an earlier proposed mode

Experimental Verification of the Temperature and Strain Dependence of the Critical Properties in Nb3Sn Wires

The critical current density in Nb3Sn conductors is described with an improved scaling formula for the temperature, magnetic field and strain dependence. In an earlier study, it is concluded that the largest uncertainties in this description arise from the temperature dependence that is described with various slightly different empirical relations. For the optimization of the numerical codes, used to predict the stability of large magnet systems, a more accurate description is required. Therefore, two different bronze processed conductors for the ITER CS model coil are analyzed in detail. The critical current is measured at temperatures from 4.2 K up to the critical temperature, in magnetic fields from 1 T to 13 T and with an applied axial strain from -0.6% to +0.4%. The axial strain is applied by a U-shaped bending spring and a comparison is made between brass and Ti-6Al-4V, as substrate materia

Strain and grain connectivity in Bi2223/Ag superconducting tapes

The critical current reduction in silver-sheathed (Bi,Pb)2 Sr2Ca2Cu3O10 superconducting tapes (Bi2223/Ag) is investigated when loaded with uni-axial strains in combination with a magnetic field perpendicular to the tape surface. The number and quality of the grain-to-grain connections and the alignment of the superconducting cores mainly determine the critical current in Bi2223/Ag tapes. It is assumed that the transport current flows simultaneously through two current carrying paths in the tape: one through the network of Josephson junctions and the other is through the well-connected grains. The model describes well the magnetic field dependence of the critical current at various strains. A detailed analysis has shown that strain deteriorates grain connectivity, induces cracking and hence changes the current carrying path. Furthermore, strain may introduce new defects inside the grains along the strong-link current path and increase intra-granular pinning strengt