T-DNA integration patterns in transgenic maize lines mediated by Agrobacterium tumefaciens

To explore transfer deoxyribonucleic acid (T-DNA) integration patterns in the maize genome, we improved the protocol of thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR), and amplified the flanking sequences around T-DNA integration sites from 70 independent transgenic maize lines mediated by Agrobacterium tumefaciens. Out of 64 specific amplified fragments, 32 and 9 are homologous to the sequences of the maize genome and the expression plasmid, respectively. For 26 of them, a filler sequence was found flanking the cleavage sites. These results demonstrate that cleavage occurs not only during the T-DNA borders but also inside or outside the borders. The border sequences and some inside sequences can be deleted, and filler sequences can be inserted. Illegitimate recombination is a major pattern of T-DNA integration, while some hot spots and preference are present on maize chromosomes.Key words: Agrobacterium tumefaciens, maize, thermal asymmetric interlaced PCR, transfer DNA,transgenics

Lightweight and highly conductive silver nanoparticles functionalized meta-aramid nonwoven fabric for enhanced electromagnetic interference shielding

High-performance electromagnetic interference (EMI) shielding material that that can function properly under extreme working conditions is critical for their practical applications. Herein, flexible and highly conductive meta-aramid (PMIA) nonwoven fabrics were fabricated by combining polydopamine (PDA) modification and electroless silver plating. The PDA modification greatly enhanced the efficient deposition of silver nanoparticles (AgNPs) and the interfacial cohesion between the AgNPs and the PMIA fibers. The silver-coated PMIA nonwoven fabric exhibited an electrical conductivity as high as 0.29 Ω/sq, an excellent EMI shielding effectiveness (SE) of 92.6 dB and a high absolute EMI SE of 8194.7 dB cm^{2} g^{−1}. In addition, the silver-coated PMIA nonwoven fabric maintained high electrical conductivity and EMI SE after being subjected to washing, bending and torsion deformations, high/low temperature, strong acidic/alkaline solutions and different organic solvents. These results have clearly demonstrated that PMIA nonwoven fabric can be made highly electrically conductive by using a simple and highly scalable method. It holds great promise for the applications in EMI shielding materials that can be used in various harsh conditions

Flexible and Highly Conductive AgNWs/PEDOT:PSS Functionalized Aramid Nonwoven Fabric for High-Performance Electromagnetic Interference Shielding and Joule Heating

High-performance multifunctional textiles are highly demanded for human health-related applications. In this work, a highly conductive nonwoven fabric is fabricated by coating silver nanowires (AgNWs)/poly(3,4-ethyl enedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on a poly(m-phenylene isophthalamide) (PMIA) nonwoven fabric through a multistep dip coating process. The as-prepared PMIA/AgNWs/PEDOT:PSS composite nonwoven fabric shows an electrical resistance as low as 0.92 ± 0.06 Ω sq−1 with good flexibility. The incorporation of the PEDOT:PSS coating layer improves the adhesion between AgNWs and PMIA nonwoven fabric, and also enhances the thermal stability of the composite nonwoven fabric. Electromagnetic interference (EMI) shielding and Joule heating performances of the PMIA/AgNWs/PEDOT:PSS composite nonwoven fabric are also investigated. The results show that the average EMI shielding effectiveness (SE) of the single-layer nonwoven fabric in X-band is as high as 56.6 dB and retains a satisfactory level of SE after being washed, bended, and treated with acid/alkali solution and various organic solvents. The composite nonwoven fabric also exhibits low voltage-driven Joule heating performance with reliable heating stability and repeatability. It can be envisaged that the multifunctional PMIA/AgNWs/PEDOT:PSS nonwoven fabric with reliable stability and chemical robustness can be used in EMI shielding devices and personal thermal management products

Matrix metalloproteinase MMP12 is associated with intervertebral disc degeneration

INTRODUCTION: Intervertebral disc (IVD) degeneration is associated with low back pain. However, the molecular changes during the degeneration process is not entirely clear. The loss of nucleus pulposus (NP) integrity is one of the early events of the degeneration. Chondrogenic markers, such as SOX9 and aggrecan, have been commonly used to assess the degree of IVD degeneration. Recent transcriptomic studies have proposed several other candidates that may mark IVD degeneration. These include cartilage oligomeric matrix protein (COMP), matrix gla protein (MGP)[1], fibulin 1 (FBLN1) [2], cytokeratin 18 (KRT18) [3], cadherin-2 (CDH2) [3], cytokeratin 19 (KRT19) [2], and Runt-related transcription factor 2 (RUNX2) [4]. Studies also demonstrated that degenerated NP attains a fibrocartilaginous phenotype [5,6] with increased ...postprin

Electrohydrodynamic printing of a dielectric elastomer actuator and its application in tunable lenses

Optical lenses driven by dielectric elastomer (DE) actuators with tunable focal lengths are presented here. They are inspired by the architecture of the crystalline lens and the ciliary muscle of the human eye and have prompted a growing interest. The most commonly used DEs in tunable lenses have often required highly transparent films and also the need to encapsulate clear liquid silicone to act as the lens. There is a restriction on the properties of the tunable lens imposed by materials limitations. Here, the fabrication of a fully 3D printed tunable lens with an inhomogeneous structure is described. It exhibited a 29% change in focal length from 33.6 mm to 26.1 mm under a dynamic driving voltage signal control. Furthermore, it displayed excellent stability when the focal length was tuned from far to near (30.1 mm to 25.3 mm) for 200 cycles. The tunable lens obtained mimics the working principle of the human eye in auto adjusting the focal length and has evident potential applications in imaging, information storage, beam steering and bifocal technology

Diffusion tensor MR imaging in the evaluation of Wallerian degeneration in pediatric strokes: work-in-progress

Poster Session - Pediatric Brain MR Imaging: no. 2090We use DTI to detect and quantify Wallerian degeneration (WD) in pediatric MCA strokes. Fractional anisotropy (FA) and mean diffusivity (MD)of the infarction, ipsilateral internal capsule (PLIC) and cerebral peduncle (CP) were measured in nine children and compared to the matched contralateral side. WD was characterized by statistically significant differences in FA, but not MD, of the ipsilateral PLIC and CP compared to normal side. FA was reduced in all children, whilst corresponding hyperintense signals on T2W were seen in five children. DTI is more sensitive than conventional MRI and can be used to detect and quantify WD.published_or_final_versio

Direct jet coaxial electrospinning of axon-mimicking fibers for diffusion tensor imaging

Hollow polymer microfibers with variable microstructural and hydrophilic properties were proposed as building elements to create axon-mimicking phantoms for validation of diffusion tensor imaging (DTI). The axon-mimicking microfibers were fabricated in a mm-thick 3D anisotropic fiber strip, by direct jet coaxial electrospinning of PCL/polysiloxane-based surfactant (PSi) mixture as shell and polyethylene oxide (PEO) as core. Hydrophilic PCL-PSi fiber strips were first obtained by carefully selecting appropriate solvents for the core and appropriate fiber collector rotating and transverse speeds. The porous cross-section and anisotropic orientation of axon-mimicking fibers were then quantitatively evaluated using two ImageJ plugins—nearest distance (ND) and directionality based on their scanning electron microscopy (SEM) images. Third, axon-mimicking phantom was constructed from PCL-PSi fiber strips with variable porous-section and fiber orientation and tested on a 3T clinical MR scanner. The relationship between DTI measurements (mean diffusivity [MD] and fractional anisotropy [FA]) of phantom samples and their pore size and fiber orientation was investigated. Two key microstructural parameters of axon-mimicking phantoms including normalized pore distance and dispersion of fiber orientation could well interpret the variations in DTI measurements. Two PCL-PSi phantom samples made from different regions of the same fiber strips were found to have similar MD and FA values, indicating that the direct jet coaxial electrospun fiber strips had consistent microstructure. More importantly, the MD and FA values of the developed axon-mimicking phantoms were mostly in the biologically relevant range

Infiltrating ductal carcinoma breast with central necrosis closely mimicking ductal carcinoma in situ (comedo type): a case series

Here we present a series of infiltrative ductal carcinoma breast cases (infiltrative ductal carcinoma with central necrosis) so closely mimicking \u27DCIS with central comedo necrosis\u27 that on initial morphological analysis these foci of tumors were labeled as DCIS (high grade, comedo). However on further histological work up and by using immunohistochemistry (IHC) for myoepithelial markers it was later confirmed that these were foci of infiltrative ductal carcinoma breast with central necrosis. This case series gives the realization that a breast carcinoma may be partly or entirely DCIS like yet invasive. In such a dilemma IHC especially for assessment of myoepithelial lining is very useful to differentiate DCIS comedo from invasive carcinoma with central necrosis

Tellurium quantum dots: Preparation and optical properties

Herein, we report an effective and simple method for producing Tellurium Quantum dots (TeQDs), zero-dimensional nanomaterials with great prospects for biomedical applications. Their preparation is based on the ultrasonic exfoliation of Te powder dispersed in 1-methyl-2-pyrrolidone. Sonication causes the van der Waals forces between the structural hexagons of Te to break so that the relatively coarse powder breaks down into nanoscale particles. The TeQDs have an average size of about 4 nm. UV-Vis absorption spectra of the TeQDs showed an absorption peak at 288 nm. Photoluminescence excitation (PLE) and photoluminescence (PL) are used to study the optical properties of TeQDs. Both the PLE and PL peaks revealed a linear relationship against the emission and excitation energies, respectively. TeQDs have important potential applications in biological imaging and catalysis as well as optoelectronics